Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Tirso
    The Ultimate HOMEMADE Rust Remover (Better than EvapoRust) Last summer I used the formula in the above video on painted tank, body panels, seat frames and chrome trim for a '66 Vespa 150 Super. No damage to the paint or what was left of the chrome. For the tank, I used a rubber stopper at the bottom and filled the tank with the solution. For the body panels, seat frames and chrome trim, I dunked them in a large plastic storage bin. I also used it on stock '98-'99 headers and the results were impressive. You can make a gel but yet to try it. This works via "Chelation" "Chelation rust removal is a non-toxic, eco-friendly, and highly effective chemical process that removes rust (iron oxide) from iron and steel by using a "chelating agent" to bind with iron ions and lift them away from the metal surface." The recipe: * Per 1L of H2O 1: 100 Grams Citric Acid. 2: 40 Grams - Sodium Carbonate (Arm & Hammer Super Washing Soda) 3: Add ingredients from 1 & 2 to the water. 4: Wait for reaction between Acid and Base to complete (carbon dioxide gas). 5: Arbitrary amount of liquid dish soap (or other wetting agent / surface tension reducer). 15-30 ml Cold temperatures slow the process. Warm solution works much faster. To make a gel: 1/8 to 1/4 tsp guar gum for 1/2 cup of liquid (0.6ml to 1.2ml tsp guar gum for 125ml of liquid) A few months ago I found another video where he used Disodium EDTA. After some research, this should work better than my first suggestion but as mentioned, the first one is good. Good luck
  3. vfrgiving
    California opened Mulholland Hwy past Rock Store? Guess whining from rich residents in the area ran out of traction for now? LA County should take some inspiration from how Blount County handles the Dragon. 👮‍♂️🚓🤑🤑🤑
  4. Tirso
    How about using '00-'01 mirror base and use the stalk/mirror from 6th? '00-01 mirrors fit VFR's from '90-'98, Though not sure if 6th gen stalk fits '00-'01 base.
  5. Today
  6. Burger
  7. RC1237V
    Just did this the other day for a friend with a KTM, he did a similar thing and spent a week trying to get it out. He brought it over, and I used a left handed cobalt bit, and put some masking tape around it to make it fit the bore snugly, and keep it centered. Used the biggest bit that was small enough to fit in the bore, and spun the drill in reverse. I stabbed it with good force, then pulled up. Did it one more time and it caught and backed it out instantly. It was too deep in the bore to try to drill with a small bit. Good luck with the repair!
  8. interceptor69
    Thanks. I'm not looking fwd to it.
  9. Rllwjoe
    In the same area I over-torqued a Crankcase Cover bolt a couple of years ago and broke it. I had misinterpreted the torque value. Anyway the stud broke off with just enough sticking out that I was able to turn it using a small chisel. I was surprised how easily it turned out.
  10. WGREGT
    Just as an FYI: I had my local dealer look for this petcock on Lightspeed, which searches all of the US dealers to see if anyone has it in their store inventory. Not a single one has old stock, apparently. Wonder if Europe/the UK has something like Lightspeed?
  11. Captain 80s
    Yeah, I just didn't need to spend the money on something that will sit in a box, maybe forever. But I bought the plate to future proof myself. Fuel valves like the Pingel will likely always be around.
  12. WGREGT
    Hmmm...the way that plastic OEM one looked coming out of the tank, I'm hesitant to go with a plastic screen material again. But the Pingel one is pricey. You bought the plate only, thinking by the time you need it, there may be another option other than Pingel I bet.
  13. Yesterday
  14. Sheep61
    Hiya folks ! So, I've made the mistake to order mirrors for gen 6th instead of my gen 4th. Bummed but not defeated, I had an idea (which surely hundreds have had before me). Instead of buying another pair (which are expensive and extremely limited in choice) I thought of swapping the base of my OEM mirrors with the aftermarket one. Obviously, it is not a straight swap, but the way the aftermarket mirrors are built, there is some ground to work on. The plan is to copy the base of the aftermarket mirror, make it to the size of the OEM and Voilà ! I don't know much about 3D printing but I heard many people printing all sort of stuff, so printing a simple bracket cannot be that hard, right ? For the 3D plan, I'm gonna try to build it through sketchup. Is anyone have tried something like this in here and would have some pointers ?
  15. slo1
    Hi slo1, Thank you for your donation of 50.00 USD. We look forward to improving the forums with your donation. Thanks VFRDiscussion
  16. natnif
    We shall clean in solidarity! @Sirbike
  17. FromMaine
    Well.........Wow! Can't even use the excuse that I don't have a 3rd Gen not to think about it. Guessing that having a roof over your head, food on the table and heat during the winter becomes discretionary expenses if you have one of those in the garage, and its a replica........ Probably worth it though. 😁
  18. Mohawk
    Welcome, nice find & the best colour 😎👍 Enjoy it.
  19. Thumbs
    Exactly, tools of the Devil Excellent advice
  20. Captain 80s
    And here is the link to the adapter plate I bought. It was a nicely machined, quality piece. I bought the plate only. https://vfrworld.com/threads/vfr-750-new-style-petcock.61955/#post-653698 I've seen someone else's version somewhere, but I can't remember where.
  21. Captain 80s
    This was the discussion regarding the screens https://www.vfrdiscussion.com/index.php?/forums/topic/112854-fuel-petcock-filter-is-trash-how-to-replace/#comment-1157684
  22. MBrane
    Small drywall screws work well, and are magnetic if they get hard to extract.
  23. MBrane
    I would soak the hole with ATF/acetone, and try a reverse/counterclockwise drill bit first. There's a good chance the heat from drilling will back the broken bit right out. If not then you have a hole for a square extractor. Round/spiral extractors are evil bits designed to make your life even harder when they inevitably break off in the hole you just drilled.
  24. interceptor69
    ng to remove it that holds the clutch slave cylinder onto the engine. Now to find a bit that can back the broken piece out. Is there a bit that small? I have used them before on larger broken bolts but not something that small.
  25. Captain 80s
    I have wrapped a "necklace" around internal piping and it tied itself into a knot. Never again.
  26. thrash89
    thrash89 joined the community
  27. JZH
    Honda used the same fuel tap on all VFRs at that time, and the ROW bikes did have an external reserve switch. The US bikes simply had a different plastic knob on the tap, which prevented it from selecting the "main" orifice (which means you got a choice between "off" and "reserve", which was the lowest feed position available). The petcocks are rebuildable, but the OEM strainer piece may not be available separately. Ciao, JZH
  28. Presson
    That is just stunning. More of the same/similar from 2012: https://www.vfrdiscussion.com/index.php?/forums/topic/72204-nr750-replica/&do=findComment&comment=850519
  29. DrErgal
    Folks, scrolling on FB I found this marvel: It's based on a conversion kit for Gen3 VFR This conversion is one of the things I'd like to do before I die 😁
  1. Load more activity

  • Blogs

    1. HispanicSlammer

      A blog by HispanicSlammer in General

      • 122
        entries
      • 565
        comments
      • 301799
        views

      Recent Entries

      HispanicSlammer

      med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. MartinkaP's Blog

      A blog by martinkap in General

      • 8
        entries
      • 77
        comments
      • 36720
        views

      Recent Entries

      martinkap
      Latest Entry

      I Am Back !

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.

  I accept