Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. vfrgiving
    There should always be light drag, you wouldn't stop in time if there weren't. The bike shouldn't be hard to push around though.
  3. Today
  4. Dutchy
    Hard to move back and forth is not normal. Does the master's piston come back freely? Or does the brake lever stays a bit "loose/floppy"? After a ride, feel the brake rotor. Burny hot is not good...
  5. vfrRider83
    My brake callipers seized up so I've had a new set of brake fluid hoses and my rear calliper professionally cleaned. Still finding there's resistance or drag on the discs and there should be none? - for maximum performance and fuel consumption. I'm guessing the pistons in the callipers don't retract fully enough and was wondering if a completely new set of callipers might solve this problem. They seemingly can't be adjusted like on a MTB. The bike requires a lot of effort to push back or forward (more so after it's been out in the rain and grit). When I removed the rear calliper I noticed how the rear wheel spun more freely, with less drag. I'm wondering if this is normal or if it can be improved. On short country lane trips I'm getting 80-90 miles before half the tank is used but on faster motorway trips around 200+ miles total. My 5th gen got c.235 miles on motorway trips. I don't use the VTEC turbo much and don't make many trips anyway (except for essentials and maybe a solo camping trip in the summer) because I'm getting older and world wearier. But if anyone has read this and has any comments or thought on this, well, cheers! Happy riding
  6. Dutchy
    The e-mark on the exhausts is a plus. As for "household goods", 30+ years ago (yes, a long time) I relocated back to the Netherlands from Scotland. Brought my Uk bought/regististerd Lemans 1000 with me. Bone stock with Lafranconis with the "turbine blade" exit. The RDW inspector was a mc bike nut, but did mention that the Db test might just prove a bit tricky. It proved to be the case, so he moved the microphones back, enough the reach the allowed limit (yes, Dutch like rules, but where needed, try and be reasonable). A recent visit to the RDW with a pal (Waddinxveen station) proved that there is less realistic RDW staff around. The Italian paperwork stated manufacturer "Moto Morini SPA", model "350 X3" He registered model "SPA 350 X3", unwilling to accept (or check) that in Italian, S.p.A. stands for Società per Azioni, which is a public limited company by shares. We got the registration, so goal achieved. But WTF? The bike's blue so Marco is now known as Smurf riding SPA Blue.... And oh yes, Morini did not assign/stamp an identification/serial # in its 350 engines. Well, this guy knew better, made up a number and told us that we'd had to stamp that in ourselves (some day)... yeah right. Cue the end of RATM's "Killing in the name of"... (None of my Morini pals (me included) were ever told to do this when taking a 350 to the RDW.) Ergo? Your mileage may vary, just do not start arguing with the RDW. You've dealt with many of these types before in your line of business no doubt 🙂 FYI only: Arguing with the police is OK in my country and won't get you shot BTW...
  7. JZH
    It's going to be difficult to present this bike as "stock"... The exhaust is obviously not stock, but it's not loud and was even "e-marked" by the now-defunct Laser JAMA company: How deep will they dig, I wonder? My reading of the requirements suggests that, because the bike is part of my "household goods" accompanying me in my relocation to NL, the RDW will apply the inspection procedure specified in Chapter 5, Section 4 of the Vehicle Regulations, which do not generally include disassembly or road testing. (This should apply to all of my bikes and cars, assuming I can get them here by August.) I see your point about waiting to do the de-linking/forks. The bike should look as boring as possible! Ciao, JZH
  8. JZH
    Well, it's a 6th gen kit, so I will first have to copy the 5th gen mounting brackets and track down/manufacture any other missing parts... Ciao, JZH
  9. Dutchy
    You might be in for a "treat" at the RDW. Your bike's current registration (be it US or UK) is "non-EU" which means it will not simply be "the frame # matches the prior registration data in the system" here is your Dutch registration. My advice is leave the forks, brake system "as is", do fit EU marked light/indicator housing. Do the mods afterwards. And hope they donot spot / class the supercharger as a 'significant modification'. Unless you are planning for the costly "special build registratration". Very involved process
  10. Dutchy
    Welcome to VFRD from across the pond
  11. St. Stephen
    I love those wheels no matter what the color. Those three big spokes still look awesome. I was so close to spending the money I didn't quite have on the VF500 for that reason, but ended up with my VF700. I think, ironically, that it was the red seat that put me off. Great photo.
  12. Captain 80s
    Red rims are polarizing. I think there is literally one Honda that came with red rims that I like. All (most) other attempts just feel forced.
  13. Rllwjoe
    Thanks, FromMaine! I admit that I was inspired to have white rims when I first saw Jay (RVFR)'s '98 almost ten years ago. Mine came with red powdercoated rims that was too much red. I still have them, and have planned to strip them and have another set of white for track-only-tires. I do like the look of the 8 spoke rear, but the prices that I've seen have, up to this point, kept me from obtaining one. Mello! Thanks for the welcome, it's good to see many familiar "faces" here.
  14. MBrane
    Simple, and cheap fixes first.
  15. Yesterday
  16. vfrcapn
    When is the blue bike going to get the supercharger?
  17. mello dude
    Welcome dude!
  18. FromMaine
    Welcome aboard! Always good to get a fresh perspective from a new member. Lots and lots of good, valid, technical information here from this group with no agenda, a refreshing difference from some other boards I have checked out. I've had/have 9 different V4's in the past 25 years without to many hiccups maintenence wise. #10 is a 2001 5th Gen. and I can honestly say I would have struggled mightly to get it in shape had it not been for many of the members here. I think you will find this to be a worth while place to spend time. Finally, I had to look twice before I realized we're both members of the WWOA5G club (White Wheels on a 5th Gen).
  19. Rllwjoe
    Hi all. Thought I should join VFRD when VFRW went down for a few days. I was getting desperate for comunication, what with the frigid tempatures and lack of ride therapy available mid-winter. I've been an active member over at the other site since 2017 a couple of months after obtaining my '98. Thank you, fellow VFR enthusiasts, for gifting a membership to me also. Joe
  20. Rllwjoe
    Rllwjoe changed their profile photo
  21. maxredline
    Long story short, the bike is now running with compression test, connetions inpection, injector cleaning and fresh gas.
  22. PJW
    PJW joined the community
  23. luigi
    My intention i using the stock VFR 800 oil cooler, so i just need to connect it the engine using the stock connections. I think is the easiest solution, so i can stay focused on most important creation of correct air scoops for water cooler. Don't forget that i installed the CBR 900 oil intercooler under the oil filter so, if i find a good coooling of water, also the oil cooling will be increased too.
  24. vfrgiving
    winter storm Fern was decent for snow totals, and I've seen much bigger storms (1996 says hi). what I can't ever recall happening is this persistent cold days on end not getting out of the 20s. There's been no real melting a week later. I'll be pulling batteries from bikes this weekend for charger duty. I can't recall doing that before, but the way things are looking I won't be commuting on two wheels for some time.
  25. bmart
    Charlotte, NC forecast updated to 8.3" of frackin' snow...after last weekend with all ice. This isn't why I moved south. lol
  26. JZH
    As you can see, she has arrived! I will be doing a few updates (replacing the tyres, SP1 (or 2) forks, de-linking the brakes, SH847 reg/rec, swapping in euro-spec headlights) before making the RDW (DMV) appointment for the inspection. I think I've got everything I need--although some of the parts were borrowed from my blue bike in London--and I also nicked its Sky Lift! I'm not going to do the windowed clutch cover (because I can't find it...) or the Sebspeed-style supercharger cooler/re-positioned traction fluid reservoir (just yet). I hope to get it road legal by the spring. What could possibly go wrong? Ciao, JZH
  27. JZH
    Some pics of the Hawk and "Schedule 40" balancer I mentioned: Ciao, JZH
  28. vfrgiving
    Found Webike listing for wheel. https://japan.webike.net/products/25433690.html If that page for you shows in different region/pricing. Upper right of page near shopping cart, little logo with truck change to "GBR" and logo with money change to "GBP" Didn't see a parts fiche there, so wanted to verify numbers. Went over to Impex japan. There's an entire legit catalog for the VFR800F. (i've never shopped OEM Honda japan domestic parts before) https://www.impex-jp.com/assets/images/catalogs/moto/honda/11MJME14/catalog.pdf Page 85: sub codes probably for subsequent years of VFR800F H K 2J? My best guess. Maybe some slight variance to finish, paint?
  29. JZH
    Reminds me of my London roundabout crash on RC36 #1, 25 years ago...in my case, it was a lovely line of spilt diesel, which I just didn't see in time. Bike survived a few more years after that as it wasn't as badly damaged as yours (it didn't do the "FU" flip), but I did tear something in my shoulder (which never got repaired). It happens. RC46 wheels were almost identical for the entire production run, but a lot changed when the 8th gen was released so I wouldn't count on the old rims fitting your bike. Still, that model has been around for a fair few years now, so I would expect cheaper eBay options to appear eventually. 5th-6th gen wheels are worth basically nothing these days--I have extras in London I don't need, but you'd have to measure every dimension (and be cool with mismatched wheels). Ciao, JZH
  30. EZASV20
    The rc51 oil cooler is twice the size of the Vfr's and is almost bolt on. I say almost because there is a difference in hose IDs so you need to double up on the Vfr's orings.
  1. Load more activity

  • Blogs

    1. HispanicSlammer

      A blog by HispanicSlammer in General

      • 122
        entries
      • 565
        comments
      • 301633
        views

      Recent Entries

      HispanicSlammer

      med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. MartinkaP's Blog

      A blog by martinkap in General

      • 8
        entries
      • 77
        comments
      • 36680
        views

      Recent Entries

      martinkap
      Latest Entry

      I Am Back !

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.

  I accept