Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. JZH
    Not sure what you mean? However, there is some question about whether I will be able to get my van (and its hitch) into the garage at all at this point...but there is no question that I would NOT have enough room to maneuver it around inside if I did! I will have some Unistrut to play with in a few days, so I will decide what to do after that. This is an electric "pallet stacker", btw: What makes it different than a "forklift" is that it requires support underneath the load, so I will need to be able to slide the front wheels of this thing underneath anything sitting on the floor of my garage below the bike shelves. So that means everything there needs to be on legs or wheels or a platform. No problem with workbenches and tool cabinets, but more of a challenge with machine tools such as my bandsaw, drill press, welding cart, future plasma table, lathe, mill, etc. Fortunately, I like planning; unfortunately, more than doing! Ciao, JZH
  3. JZH
    The last place she probably wants to go is the Netherlands! Ciao, JZH
  4. JZH
    I bought some of that stuff to build an enclosure for my 3D printer (not yet assembled...). Very cute--compared with the brute utility of Unistrut! Generally, however, aluminum anything is a lot more expensive than steel, plus I'd not really know where to start with calculating the loads and sizes required. I've seen unistrut used in countless (sometimes dangerous) situations, so I'm fairly comfortable using it for the shelving structure. I've ordered some test pieces and brackets, so I will have a better idea soon enough. Yeah, I don't think I want to put a pic of my actual house on t'internet, but it looks something like the house on the left: Mine's not red, not directly on a canal, and is a little taller, but it's a traditional house in a traditional row of Dutch houses like this. Most such houses have had their ground floors converted into modern living areas (from whatever they were originally, such as a retail shop or workshop). Ciao, JZH
  5. Today
  6. gropula
    Interesting development. Is the air fuel mixture tuned properly with the Power Commander 5? With the amount of mods that you've done it's only possible to guess where things went wrong. Porting the cylinder head is very tricky and can easily be detrimental to performance if done wrong.
  7. JZH
    You'll have to change your "In My Garage" blurb... Ciao, JZH
  8. JZH
    Strange. I once had an EBC (I think) on my 750, and both it and the OEM rotor it replaced had huge cut outs to allow the rotor to clear the axle studs. Bit of an oversight on Brembo's part! Ciao, JZH
  9. roliy43780
    roliy43780 joined the community
  10. JZH
    Does the 1200 have a hollow rear axle? (Most of) the other VFRs do. If you had a pair of jack stands, a small floor jack and a piece of steel rod or bar that fit through the rear axle, you could set the axle on the RH jack stand, lift the bike up enough to rest the steel rod or bar on the LH jack stand and, once the rear is stable, use the floor jack to lift the bike under the exhaust to raise the front wheel off the ground. It shouldn't crush the front exhaust pipes if lifted that way, but the 1200 is a heavy beast... Ciao, JZH
  11. JZH
    Well, it would have to be really simple! I have been struggling with Fusion just recently (pointlessly re-designing the JD's Garage plasma table plans to my ridiculous specifications), but that is what happens whenever I try to pick up CAD again. But I've never managed to go beyond the CAD to the CAM, so you might need someone who has at least done that bit before... Ciao, JZH
  12. guestpost11
    In the fast-paced world of web hosting, your website is more than just a digital presence — it’s the heart of your business. From showcasing your hosting packages to handling client billing and support, your website must function as a marketing tool and operational hub. For this reason, two platforms dominate the hosting industry: WordPress for building beautiful and engaging websites, and WHMCS for automating the backend operations such as billing, support, and service provisioning. But how do you make these two powerful systems work together seamlessly, both in function and in design? That’s where Hostiko comes in. With a dedicated suite of WHMCS themes and WordPress hosting themes, Hostiko offers a unified, professional, and efficient solution tailored specifically for web hosting companies. Let’s dive into the importance of WHMCS and WordPress themes in the hosting industry, and how Hostiko can help you deliver a seamless, high-converting online experience. 1. The Role of WHMCS Themes in Hosting Automation WHMCS (Web Host Manager Complete Solution) is the industry’s go-to platform for managing hosting clients, automating billing, provisioning hosting services, handling support tickets, and managing domain registrations. It’s a backend powerhouse — but in its default state, it lacks the visual polish and branding flexibility required to stand out. That’s where Hostiko’s WHMCS themes change the game. What Makes Hostiko WHMCS Themes Special? Hostiko’s WHMCS themes are designed to offer full integration with your brand identity while maintaining the powerful features that WHMCS provides. Rather than forcing clients to switch between a beautifully designed marketing website and a basic, outdated client area, Hostiko brings the two together through stylish, user-friendly WHMCS templates. Key features include: Fully responsive layouts: Optimized for mobile, tablet, and desktop users. Clean, modern design: Elevates user trust and improves client experience. Custom order forms: Sleek, intuitive interfaces for ordering domains, hosting packages, and other services. Multi-language and RTL support: Ready for global businesses. Fast performance: Optimized code to reduce load times and improve overall site speed. By using Hostiko WHMCS themes, your client area becomes a fully branded extension of your main site — increasing trust, boosting retention, and enhancing usability. 2. WordPress Hosting Themes: Building a High-Performance Frontend While WHMCS takes care of your backend processes, your front-facing website — the place where visitors learn about your services — is best handled by WordPress. WordPress offers unparalleled flexibility, SEO capabilities, and a vast ecosystem of plugins, making it ideal for showcasing your web hosting business. However, not just any WordPress theme will do. You need a design that speaks directly to hosting customers. That’s exactly what Hostiko’s WordPress hosting themes are built for. Designed Specifically for Hosting Providers Unlike general-purpose WordPress themes, Hostiko’s hosting themes are crafted exclusively for web hosting companies. These themes include: Pre-built demos tailored for shared hosting, cloud services, VPS, and domain registration. Domain search tools that allow customers to look up domain availability in real-time. Pricing tables that clearly compare hosting plans. Data center maps, client logos, and service features displayed with precision. Drag-and-drop builders (like Elementor or WPBakery) that allow full customization without coding. Whether you’re targeting startups, developers, e-commerce businesses, or enterprise clients, Hostiko has a WordPress theme designed to appeal to your specific audience — with dozens of demo variants ready to deploy. 3. Unified Design & Seamless Integration: The Hostiko Advantage One of the most important, yet often overlooked, aspects of running a successful hosting website is design consistency between WordPress and WHMCS. Customers browsing your WordPress site shouldn’t feel like they’re entering a different world when they go to your client area. That inconsistency breaks trust and creates friction. Hostiko solves this problem by offering matched WHMCS and WordPress themes — creating a cohesive, fluid experience from first click to final payment. Benefits of Integrated WHMCS + WordPress Themes Consistent Branding: Fonts, colors, buttons, headers, and layouts align across the website and client portal. Improved UX: Clients enjoy a smooth experience, leading to better satisfaction and fewer support requests. Increased Conversions: A unified look makes users more confident during signups and purchases. Time-Saving Deployment: Hostiko’s themes come pre-integrated or with simple WHMCS bridge support, minimizing manual design work. For hosting businesses that rely on both platforms, using two unrelated themes can cause design clashes and inefficient development cycles. Hostiko bridges that gap with a synchronized design system that makes your hosting brand feel polished and trustworthy from end to end. 4. Why Choose Hostiko for Your Hosting Theme Needs? There’s no shortage of WordPress and WHMCS themes on the market — but very few are purpose-built for hosting providers. Fewer still are optimized for both frontend (WordPress) and backend (WHMCS) environments. Hostiko stands out by doing both — and doing it exceptionally well. Here’s what sets Hostiko apart: a. 60+ Prebuilt Demos Hostiko provides over 60 demo layouts, each crafted for different types of hosting providers. Whether you offer shared hosting, cloud services, managed WordPress hosting, or reseller accounts, there’s a demo tailored to your audience. b. Mobile-Friendly & SEO-Ready All themes are built with mobile-first responsiveness and search engine optimization in mind. This ensures your site looks great on every device and performs well in Google search rankings. c. Optimized for Speed & Performance Hostiko themes use clean code, compressed assets, and optimized scripts to ensure fast loading speeds — critical for both user experience and SEO. d. Outstanding Support Hostiko offers detailed documentation and dedicated support to help with theme installation, WHMCS integration, updates, and customizations. e. One-Stop Solution Hostiko is one of the only providers that offer both WHMCS and WordPress themes in one package. This means no need to buy separate themes, hire two different developers, or manage conflicting updates. f. Regular Updates As both WordPress and WHMCS evolve, Hostiko ensures its themes remain compatible with the latest versions — helping you avoid security issues and broken layouts. Final Thoughts In the web hosting industry, the difference between success and struggle often comes down to user experience, professionalism, and trust. A disjointed or outdated website can make potential clients question your reliability. But with the right tools, you can create a digital experience that reflects your brand’s credibility, quality, and service. With Hostiko’s WHMCS themes and WordPress hosting themes, hosting companies of all sizes can launch or redesign their websites quickly and confidently. Whether you're building your first hosting site or upgrading an existing one, Hostiko offers the design, functionality, and integration you need to stand out in a crowded market. If you want a fast-loading, mobile-friendly, and conversion-optimized hosting website that looks amazing and works flawlessly — Hostiko is your solution.
  13. keny
    I'm happy I bothered checking the valve clearance even seller told me they were checked about 6k kms ago, have the interval, turned out only cylinder #2 inlet valves was in spec, all other was tight, some awful tight...... Next as I have the radiator off as coolant drained I plan to take off the thermostat housing and give it a fresh paint Even If usually leave some patina this needs fresh paint as looks tatty
  14. keny

    Anything goes!

    Images added to a gallery album owned by keny in Member's Gallery

    Other VFR and other pics....
  15. guestpost11
    guestpost11 joined the community
  16. Johnrb
    Johnrb joined the community
  17. Mons
    Mons joined the community
  18. Tirso
    https://chatgpt.com/ ?
  19. PlentyMech
    Fitting a new clutch cover and wanted to check the plates as Ive had a lurching problem where the bike, if held say at lights when coldish with the clutch pulled in, it could give a sudden lurch forward catching me off guard when I move off quicker rather than slower. I've never pulled a clutch apart before and I just wondered if anyone could spot anything untoward in these pics? There's a few scratches on a few of the tangs but nothing looks buggered or how Id not expect it to look and friction plates seem to have a consistent amount of "meat" on them. Bike has done about 50K KMs. Thanks all for any input before I put it all back together.
  20. Rhonda
    I have the SW Motech center stand like the one above. Fantastic addition, most maintenance is a breeze! Highly recommended!
  21. cHonda81
    cHonda81 joined the community
  22. mello dude
    Anybody up to convert my chicken scratching hand drawing to CAD and maybe model and STL? Fairly simple stuff. Its been a long time since I did any CAD (Unigraphics, Catia).... I got sucked into management. Thanks
  23. Yesterday
  24. UrAllOnSteroids
    UrAllOnSteroids joined the community
  25. 303motoco
    303motoco joined the community
  26. Burger
    Burger joined the community
  27. Presson
    Does the fuel pump prime when with the kill switch at run you switch the key to on ? You should hear it
  28. Captain 80s
    With RED especially, my experience with ColorRite is... ColorRong
  29. CoyoteChris
    For $77 for the paint, it is expensive but I feel the match would be perfect. It is an option for sure.
  30. Timuli
    Now the dyno run has finally been done, there has been all sorts of rush here so I haven't had time to do it earlier. The result now wasn't quite what I expected. I think the torque curve is good if you don't take that last part into account. Now I have to start figuring out what's causing the power drop after 8000rpm.
  31. Ughandi
    Wow! That ColoRite site really is easy to use!! I found the needed base and color touch up pens within seconds!! I thought it would be much more difficult for the fastest color on the 5th gen! Thanks @FromMaine !
  32. Ughandi
    Seems like quite the oversight from the big B. Good words for the forum!
  33. Wintherman
    Wintherman joined the community
  34. keny
    Also good whit most silicone is you can peel off the extra And the cap is loose and a new ordered today In general all is going slowly now, been for a while, because of other stuff as some health issues that caused a total stop for a few days late last week.....
  35. expvet
    I thought about modifying it but since I do not have the equipment would be depending on an unknown shop to execute a clean job. In the end total cost would probably be near what I paid for the no doubter Honda rotor.
  36. CoyoteChris
    Wow! Thanks! you were a big help. R334. I am just an old man who has been riding since '64 but I love this bike. My FJR has put on too much weight over the years and more likely my old body is weak and this wonderful bike and my 2017 Vstrom get me through the touring season. There are a couple of very small marks but on the pannier there is a patch 1.5 inches wide by 5 inches long. I could put a reflector over it but I thought I would try this first. Thanks for helping me.
  37. SeanW
    Hey VFR peeps, Looking for help. The bike will turn over strong but is not getting fuel. I recently had to fix the BAS wiring as the connectors melted so I removed the connector and spliced in directly. The bike was running well until the BAS wire melted so I figured that was the only issue. The bike died while riding. As you will see and hear in the video, something else is strange. When I turn OFF the kill switch and hold down the start button, you can hear what sounds to me like the fuel pump. It did this 4 times and will not do it anymore. The “pump” sound was only while I held down the start button but again, it’s not doing that now… I’ll take any and all advice/comments with appreciation. TIA! Troubleshooting steps so far; it’s worth noting, that before I spliced/soldered the BAS, I bypassed it and it would still not start. 1) fixed BAS wiring 2) cleaned kill switch button with CRC electronic cleaner, 3 times. 3) checked all fuses are OK 4) made sure all connections under fuel tank are secure 5) the R/R and Stator were replaced within the past year. 6) kickstand up or down, doesn’t make a difference 7) brand new battery today
  1. Load more activity

  • Blogs

    1. HispanicSlammer

      A blog by HispanicSlammer in General

      • 122
        entries
      • 565
        comments
      • 296263
        views

      Recent Entries

      HispanicSlammer

      med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. MartinkaP's Blog

      A blog by martinkap in General

      • 8
        entries
      • 77
        comments
      • 34207
        views

      Recent Entries

      martinkap
      Latest Entry

      I Am Back !

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.

  I accept