Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Worfje
    Hi, yes you should hear it prime when switching on ignition.
  3. budnveethevfr800
    budnveethevfr800 joined the community
  4. Lisqdp
    Hi my bike was laid up for 6 months over winter inside my garage. I started it today with no problem but within a few minutes it cut out. It then restarted/cutout several times, but now won’t start at all. I drained the tank and replaced with fresh fuel. I’ve owned the bike for 6 years and always stored it over winter and never had any issues. Has anyone any ideas what this could be please? Should I hear the fuel pump prime when I switch on the ignition? Thanks in advance.
  5. Lisqdp
    Lisqdp joined the community
  6. Today
  7. Iain2
    Tyga also do a blanking kit, this can be used to remove the secondary system that dumps fuel into the exhaust for emissions in America. This system can be removed to reduce weight. It will not change the performance of the bike mechanically it will through a small weight saving
  8. mello dude
    I've used both, depending what I could find and also both the Bosch 3300 and 3323.
  9. GTman
    I had seen it at CMS, it costs almost as much as I paid for the entire bike! Then with the couriers that are around it would not arrive at its destination intact! It was never my intention to change the tank, otherwise knowing I would have to do it I certainly would not have bought that bike.
  10. airwalk
    These pumps will function fine without the relay that sends power to them. Relays have been known to give trouble 🤔
  11. Moe
    Hi Terry Thank you for the response and the correction, as an 05 it will be a 6th gen bike. The wires are def off the side light (UK Model), colours are brown and green. At the weekend I managed to trace the wire from the left side sidelight into the space behind the indicator where it connects to the loom near the indicator wiring. So checking the right side faring I managed to locate the corresponding connector for the other side light. Thankfully it didn’t require dismantling the front faring.
  12. Johnny90000
    Hi I am in the need for a replacement speedo drive sensor for my 94 model RC36. Will the 800 version fit? The cable looks shorter but I could extend that if required.
  13. Johnny90000
    Johnny90000 joined the community
  14. Sobu
    Ok , thanks a bunch. I'll create a couple of updated diagrams once i get the bike running again. That way nobody in the future will set out on the wild goose chase I've been on lately.
  15. Iain2
    Carbon fibre wheels: I have them for my ZZR. Just amazing I think a similar result would be had for the VFR unsprung weight and all that. Then go down 1 tooth: Very expensive! I would love to do it but need a lotto win😀
  16. VYFFER
    VYFFER joined the community
  17. VYFFER
    How did finding these as options come about? They aren't cross referenced as 'matches' to an OEM filter, are they? At least not when you call an auto parts store. I guess what I'm asking is, how do you know they're 'safe' for the engine?
  18. flyintwowheeler
    Yes. Dumping that big centre stand and bracket is bound to loose ten kilos. My thoughts would also be to shed as much weight as possible of the bike. More power and improve handling
  19. flyintwowheeler
    I had the pump apart and all was clean and dry at the points. I give them a light sand with p600 and contact cleaner and all seems to function as it should.
  20. flyintwowheeler
    I will take a look at them. Another thought I had is part of the loom has rubbed through on the frame that sometimes makes the pump go in reverse, what is the possibility of that? I honestly thought I'd fixed this 500 miles back.....until yesterday
  21. Terry
    And what did the test ride show? Nothing much, maybe the VTEC engagement is a little smoother than before? Anyway, it all worked perfectly and I covered an easy 300km including some "spirited" riding.
  22. Yesterday
  23. airwalk
    Try bypassing fuel pump relay, doubtful the pump itself would intermittently malfunction unless the points it has are sticking together, ‘92 is 33 yrs old, if leakage of fuel gets in there it can make issues…
  24. jefferson
    The only other thing that comes to mind would be the vents on the carbs. Those can do funny things.
  25. flyintwowheeler
    I thought the same but no suction when I open the filler. The only thing I can think is that there is a foreign object inside my tank sometimes covering the outlet for the petcock. It's a strange one because it did 500 miles fault free since it did it previously
  26. BusyLittleShop
    Ths is the method of aluminum fork polishing I used to returned the factory luster of my RC30 forks... 1)Strip the factory clear coat with paint stripper... 2)Sand with fine foam sanding block in one direction only... you want to curve around the tube like Honda did and not sand down the length of the tube... 3)Polish with 3M gray micro fine pad... again only polish in one direction only... you want to curve around the tube like Honda did and not sand down the length of the tube... 4)Spray with clear coat...
  27. Iain2
    This has probably been covered but I like this bit of kit.
  28. jefferson
    Might be a vent problem on the gas cap. Next time it happens open the gas cap and see if you hear some suction. If it fires up right after that you have your culprit.
  29. theorangecrusher84
    theorangecrusher84 joined the community
  30. flyintwowheeler
    Well...this has me baffled. Let's go through it all from the top. About a month ago,it stopped 3 times in one day. Got it home and first thing I noticed it was leaking fuel at the filter because the wrong filter had been fitted and the inlet and outlets were smaller than the oe filter so,we replaced that . The symptoms....bike drops a cylinder until eventually it dies and won't restart. Let it sit 5-10 mins and off it goes. Carbs cleaned,correct filter, petcock cleaned and pump is working. Since it last stopped,I thought I had the issue cured as I've done around 500 miles since, absolutely faultless and then today...it stopped at the side of the road.It definitely had all fuel in the carbs used as when I tried to restart,the fuel pump was clicking fast to prime the carbs but it didn't seem to be getting fuel. Let the bike sit ten mins,it fired up straight away and all good. Anyone experienced an issue like this. NB, my fuel pump was cool to the touch
  31. papalooser
    papalooser joined the community
  32. JZH
    It should be noted that these are the "Y2K" VFR800Fi mirrors, used only on the 2000-01 VFR800 models. Before 2000, VFR800s had condom mirrors, and after 2001, VFR800 mirrors had a narrower bolt-spacing. Ciao, JZH
  33. JZH
    In theory, the final digit in a Honda part number (which is the only difference between the two part numbers in your example) is a "subcontractor" designation and not a "modification" designation, so the two ECUs should be functionally the same, even if they have been sourced by Honda from different OEM suppliers. But Honda is not bound by the logical implications of its own part numbering system, so there could be other reasons for the changing of the part number. Indeed, a little searching on CMS' website shows (a) that both parts appear to have been manufactured by the same supplier (Keihin), and (b) D03 is shown as a "supersession" of D02. Another EU website, www.bike-parts.fr, agrees that D02 is "obsolete" and was superseded by D03. Whether this is accurate or not is not known, but the available evidence suggests that the two ECUs (PGM-FIs, in Honda-speak!) are indeed functionally identical. Good luck. Ciao, JZH
  34. JZH
    Well, if it's really bad, there's always this: Ciao, JZH
  1. Load more activity

  • Blogs

    1. HispanicSlammer

      A blog by HispanicSlammer in General

      • 122
        entries
      • 565
        comments
      • 295519
        views

      Recent Entries

      HispanicSlammer

      med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. MartinkaP's Blog

      A blog by martinkap in General

      • 8
        entries
      • 77
        comments
      • 34121
        views

      Recent Entries

      martinkap
      Latest Entry

      I Am Back !

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.

  I accept