Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Glystras
    Quick update: As it turns out, the radiator specialist decided to cut open both radiators to fully inspect them internally and then weld them back together. (I’ve honestly never heard of that method before, but okay...) Anyway, I’m now waiting for the results of that inspection. If the radiators check out fine, my next step will be to follow Airwalk’s and Terry’s advice — checking (or possibly removing ) the thermostat to see if it might be causing the issue. Appreciate the continued input — I’ll keep you posted.
  3. Today
  4. Terry
    The turn signal bulb and the dash bulb are in parallell; the same 12v feeds to both (basically the circuit is 12V+ to flasher to direction switch to bulbs to earth), but they have their own earth path. So it is certainly possible for a faulty dash bulb to be the problem as that won't affect the turn signal bulb (and vice versa). IIRC the bulbs in the dash are accessible once the nose fairing is removed, and they just pull out in a removable socket.
  5. JPP2U
    JPP2U joined the community
  6. StefanTito
    StefanTito joined the community
  7. StefanTito
    Hello. I have a vfr800 fi 2001. Today I installed a new set of fairing. After that my right turning signal indicator is working but not my led indicator from the dashboard. Is possible to be one of the cables ? And is from the turning bulb or from the dashboard. Or it can be both ? And is hard to replace the led from the dashboard if is the case ?
  8. DrErgal
    Cap, I noticed the Civic logo. but I opted to "fly over" it 😁
  9. TimC
    Welcome from Ohio! 🙂
  10. TimC
    Welcome from Ohio, USA! Thanks for posting that great introduction! 👍 I keep thinking someday I'll buy a 5th generation VFR, even if it's something that needs some work. It wouldn't be my only motorcycle, so I could afford to take my time with it. While I loved my 6th gen, I'd only need the VFR for fun days and not trips and tours, so it could stay mostly unmodified. Maybe. 😉
  11. stephan
    stephan joined the community
  12. Presson
    Yep, can hear it now and especially clearly when you hold the revs at just over 3k. It does sound like a bearing that has failed. I think you are going to have to do a teardown check of tolerances. Personally I wouldn't be inclined to keep riding it until the problem has been identified and fixed.
  13. COS_VFR
    I am pretty sure that the kitten left it there while you were posting your message to VFRD
  14. Captain 80s
    Yep... that Civic wheel looks sweet on there. 😉 Haha! Nice looking bike! Welcome!
  15. Wald
    Welcome from the Northeast. Nice rig!
  16. DrErgal
    Welcome! And congratulations for the bike: it's the VFR with the best wheels set ever ❤️
  17. DrErgal
    Welcome Denis! We're nearly neighbor: I live in Trento, and Croatia is pretty close In fact, the first race of my life was in Rijeka, a quarter of century ago (what a memory ❤️) Further to your misadventure with the bike, well... every cloud has a silver lining: as you can see, yellow is the fastest color 😎 😁every cloud has a silver lining
  18. Rhonda
    Looking for a set of lowing pegs/links for 7th gen. thanks in advance
  19. Rhonda
    It's simply wonderful. No, seriously! Once you spend a bit of time with it, you'll learn to appreciate the convenience of not having to shift in heavy traffic. I agree that the plain "auto" mode is kinda lame, But the "sport" shifting mode really wakes up the engine!. Honestly, i find myself using only manual mode or sport mode. My ride is a 2010 VFR1200 with about 16k miles. While it's not the later years you mention, it's probably just as reliable overall as the later models. The failures you hear of seem to affect more riders in Europe/Asia, from what I've read, as it may be due to different octane fuels. The only downsides would be 1. heat...she generates quite a lot, especially in slower traffic. Luckily the cooling system seems to do a good job of bringing the temps down. 2. ergonomics. Despite being labeled as a "sport tourer", the bike seems to embellish on the "sport" aspect. As a result, I've resorted to heli bars and am looking to a set of lowering pegs. If you want a very accurate account from several owners, check out the following link. There's literally nothing I don't agree with of any of the reviews: HONDA VFR1200F (2010-2011) Review | Speed, Specs & Prices
  20. MagnaMan
    Hi, I'm new the forum. My Magna is one of my favorite motorcycles but I've always wanted to have a VFR as well. I've been tooling around with the idea of the 1200. I wanted to get a later year in this line up because generally, I've found that Japanese vehicles are at their best the last few years of a particular generation because of their continuous improvement manufacturing. I'm seeing more VFR 1200 DCT models and I was wondering what the impressions were. I've heard bad stories of it not shifting optimally when in automatic mode and that it was best run in manual shift mode. I also see that from 2012 onward there was a foot shifter available for the DCT. But what is it like? I just want to know if I need to rule them out while shopping for a VFR or include them. Thanks in advance.
  21. MagnaMan
    MagnaMan joined the community
  22. JJMdato
    JJMdato joined the community
  23. JJMdato
    Do you think an American 2013 ECU will work on a 2016 engine? Same 3 plug from pics. Have a vfr1200 in a Datsun.
  24. FromMaine
    OK, I swapped out my phone for my computer and turned the volume to max and tried your link . Far better sound quality. Then tried your link on my phone and turned sound to max, probably the best sound quality. Yes I do hear something. I cannot say for certain what as I'm a retired mariner not a motorcycle mechanic, but when I close my eyes and listen to it, it reminds me of a bearing squeal. Take that with a grain of salt, ships have more bearings than you've had hot breakfasts, so that's what I'm familiar with.
  25. Terry
    My FSC600 scooter had a small oil jet aimed at the stator which I assume was there for cooling purposes (but it still burnt out the stator). The photo below shows the gallery where the oil crosses into the alternator cover and then the little jet (at 12 o'clock when installed) where it aimed at the stator.
  26. FromMaine
    Very nice introduction, it is apparent you are a VFR enthusiast to say the least. Obviously you also have some painting skills, that 2001 looks like it just came out of the factory in Hamamatsu Japan! Shame it got wadded up, but good your buddy only had wounded pride to show. If you are not aware, the same mirrors on your 2001 will directly fit on your 1999, in fact have them on my 1997 4th Gen. Emgo makes replacements that are exact copies, or possibly the same as Honda uses at less than half the cost. Left part number 20-37342, Right part number 20-37341. I spent 4 Seasons on a ship based out of Rijeka about 10 years ago, really liked it there. After I retired I brought my wife to Croatia for 3 weeks in 2023, and again in 2024. You live in a very nice country, I really enjoy the culture and pride of your countrymen. Glad to have you, lots of good technical advice and helpful people here, so join in!
  27. Gaz66
    Anybody come up with a workable solution to cool a stator on a 5th Gen?
  28. Marcus39
    Marcus39 changed their profile photo
  29. Marcus39
    Hello all. Marcus here. Just wanted to say hi. This is my VFR.
  30. Marcus39
    Marcus39 joined the community
  31. Terry
    Welcome Denis! That looks sort of familiar; I also have a 99 in yellow, not my first colour choice but it was the best VFR around at the time and it has grown on me. AFAIK, the 98/99 have larger diameter headers than the 00/02 that you had previously, which had smaller stainless headers and a cat, so that maybe the low end difference that you feel. My 99 is certainly not lacking in urge compared to my 800 VTEC. I have never explored the higher speed capabilities of mine as we have no autobahns handy but 270 sounds mighty impressive.
  32. Terry
    From the symptoms, the cooling of the bike is just not keeping pace with the revs; at low RPM there is sufficient radiator flow, but when the revs are up the flow is not keeping up with the extra combustion heat generated. That sort-of fits a stuck thermostat or some other obstruction of the cooling flow. Just because the thermostat was OK 2 years ago doesn't mean it still is. Maybe also worth looking at the water pump; I have heard of a single instance when the drive coupling to the pump sheared off, or maybe the impellor is badly corroded and not moving fluid well?
  33. airwalk
    Thermostat? Even new parts can sometimes have flaws….
  34. toreckman
    I just routed the the cables to match the stock position. I'll try take some pics tomorrow.
  1. Load more activity

  • Blogs

    1. HispanicSlammer

      A blog by HispanicSlammer in General

      • 122
        entries
      • 565
        comments
      • 295980
        views

      Recent Entries

      HispanicSlammer

      med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. MartinkaP's Blog

      A blog by martinkap in General

      • 8
        entries
      • 77
        comments
      • 34182
        views

      Recent Entries

      martinkap
      Latest Entry

      I Am Back !

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.

  I accept