Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Vfrdlo
    Vfrdlo joined the community
  3. Vfrdlo
    Hey! I have a 2002 Honda VFR 800 and I noticed that I have lack of power in the throttle. The Fi light did come on and does two long blinks followed by two short blinks. Any ideas what this could be?
  4. Today
  5. toreckman
    I checked for a stuck thermostat. The right radiator starts heating up from engine turn on. The left radiator starts heating up from say 50C. The left fan is now stuck on permanently. I guess from that, its indicating the thermostat is stuck open to some degree? And the fan switch is faulty?
  6. Philois1984
    Nearly all the riding I do on the VFR is open road riding. I never do clutchless gear changes. I’ll do the oil change and brake and clutch fluid flush and see what improvements if any I get.
  7. Exuptoy
    Spacer fitted and just assessing the chain run. Wheel alignment looking close too.👌
  8. Exuptoy
    I’ve since purchased a 1198/1098/848 subframe, undertray and tail light and got on with making it all fit. The subframe bolted on at the top mounts but there was no way I’d get my 53 year old belly behind the tank! Turns out the Ducati has a shelf that’s about 90mm longer than its tank to support the ends of the seat. But aesthetically to me anyway, it was pleasing. So, out with the grinder for some fettling. I cut off the mounts, counterbored them so I could plug weld a spigot inside, I bought some steel as near to the Ducati dimensions (20mm with a 3.65mm heavy wall), reamed the inside from 12.7mm ID to 1/2” and use some 1/2” bar to carry the joint. Yes, we know I’m a messy worker! I’ll clean the bench next month!😂 Next it was on to the lower tubes. I tweaked them to the correct angle and got the grinder out again. This time the wall thickness was thinner so I went with a solid extension. And here’s how it turned out. I’m more than happy. I’ve since purchased a 954 Fireblade front end but that’s the next stage if anyone is interested.
  9. Exuptoy
    I’ll also stick the overview of my project in here in the event that anyone is interested. If I’m asked to remove this then I have no issue as it’s technically not vfr based, but hey, it’s a bike right? …and it will have a VFR swingarm attached. I bought this Fireblade with a suspected head gasket issue and a question mark over its history (might have been a wrecker back in 2000 and somehow slipped the net and ended up back on the road) for just £400, but it was a runner but it had been hit by the ugly stick and I thought it deserved better. After all, a head gasket issue is a cheap fix and if the frame has history then I can do all my mods on a standard frame and just pick up a used frame on a clean title for £250 and when it gets stripped for paint and powder I could just rebuild into the cheap frame. Anyway here she is in all her glory. Ain’t she purdy!😂🤐Yes, that really was the headlight setup! Told you it was ugleeee! But it had potential and I’ve ridden it so I know it goes. It dies however look like it’s been used as a boat anchor! An hour after getting it home it looked better! …and a mate gave me some 1198 track bodywork to see if it could be made to fit.
  10. Exuptoy
    Cheers guys. As I originally posted I’m here for advice not to raid you guys’ parts bins, but as you know as dedicated forum I will more likely than not gain the info required due to the number of viffer owners here, and the likelihood that there will be a few projects on the go. If not then it’s not a big deal, I’ll just measure what’s in front of me. Anyway, back to the motorised velocipede, as an engineer, I couldn’t walk past the finished article without my gaze being distracted by the gaping chasm that is the space alongside the arm when it’s fitted into a non-native frame (even if a lot of the parts share a common lineage), so I now have a bush to hide said gap, a kind of shame plate😂. I could have gone with the viffer pivot sleeve which is a good 25mm longer than the Fireblade one, and does the principle job of holding the arm in suspension with no further work but I’d be left with the gap below…..but, I think my solution is nicer on the eye so I’ll run with that…..and it’s my bike anyway so my rules go.😂 With the vfr one adjusted up to the bearing face….. 🤮 or the shorter Blade one, to which I will add a spacer in the resulting gap which will fill the void and make the visual aspect more pleasing. If my calculations are out I can modify this as I find any discrepancy. So far I’ve found the arm may need to be shifted across by 8mm as the drag/drop link (dog bone) with triangular plates isn’t central to the arm but I’m more concerned with the wheel being central, which could be corrected with a spacer behind the wheel but the chain run is also a factor, however I know a couple of mill won’t upset the bike too much but I’d rather get it bob on. I’ve also found the RC30 has a front sprocket with about a 4mm offset where as the blade and VFR along with a number of Honda bikes have the same sprocket, testament on the JT chains website. The fact remains though, until it’s in and bolted up I can’t measure the actual centre line to see what’s needed next.
  11. fink
    I would be changing the clutch fluid. On another note do you clutch up or just roll off and clutchless change? If you do both does it feel clicky on each? Where is most of your riding done open road or town/city?
  12. Grum
    My apologies obviously some terrible distortion going on with the mirror, lovely lady indeed Sir.
  13. Philois1984
    How dare you sir! That is actually my wife, she was dressed in pink though. 😂
  14. keny
    Nope, the one I got is for a 37mm, part number ML7-691 tells it's from a 1987 European market bike.
  15. Terry
    I would suggest the most likely cause would be a little air in the clutch line or the clutch slave getting a bit sticky. A flush would be the first step but actually pulling the slave off the bike and disassembling and cleaning fully is not a big job as long as you are patient when you refill and bleed the system. The clutch pushrod can get a bit stcky as well, and can be fully extracted for a clean and polish and a bit of grease.
  16. Grum
    Haha Phil, very dappa indeed Sir. Very Exclusive riding gear there Sir. A close look at your L/H mirror reflection, am I right in guessing that a dressed in pink clown or similar has taken the photo??
  17. Grum
    Hi Phil. Just for info, my bike and gearbox seems to be very happy using Castrol Power1 Semi Synthetic 10W-40 oil. I've used this oil since the day I bought it along with previous 6gens. Flush both Clutch and Brake! Attached photo on Tuesday 28/5 in North Eastern Vic. Mornings got down to 1degC then warmed to beautiful late Autumn days.
  18. Philois1984
    I recently participated in the Distinguished Gentleman’s Ride here in Townsville, it’s for a good cause and I enjoyed the ride. I’ll attach a photo. I’m going to display the Triumph at a “All British Day” here in Townsville tomorrow. The bike is still spotless from the DGR so no real work required.
  19. Philois1984
    Thanks Grum, I will try a different oil and flush the brake fluid, hopefully that will be all it is. If that doesn’t help then I will have to spend some money and let the experts? have a look at it (in case of confusion it is the VFR I’m having trouble with) Hope you are keeping well and the weather isn’t so cold you don’t want to get the bike out.
  20. Captain 80s
    Gaz66... That quote wasn't referring to you, but I did almost post suggesting that. It was very clear to me that he was looking for info, not parts, from a fellow enthusiast. He said so exactly, clarifying why he was here. Is your point of view some kind of gate? Your second reply was quite honestly, strange. The un-apology. You still haven't "passed the test", but Happy Friday. Have a good weekend. Fireblade with a VFR SSSA. Not new ground, but... Fuck to the Yes.
  21. Grum
    Hi Phil. Sorry to hear of your gear shift issues. I'm up to 98,500k's and the gears are as smooth as the day I bought it. I wonder if the recent service, and the oil they used is quite different to what was in it. Oil viscosity, semi or full synthetic etc can have a big effect on gear shift smoothness. I'm sure there is nothing you've done, or an issue with the bike to have caused this. As for your clutch, when was the last time the clutch fluid was flushed/bled? A good flush and new fluid might be the answer to both issues! For info I change my brake and clutch fluid approximately every 12 months, it's an easy job on a 8gen. P.s. Be nice to be in warm Townsville! Cheers. Grum.
  22. Captain 80s
    About 40 miles later on the other side of Carnation after two lovely roads, over the ridge, down the road a bit and back over on a different road... Cascade Mountains in the background.
  23. Gaz66
    HaHa ! My plan worked, no we've outed you. I wasn't stirring the pot so to speak, your post does come across as a bit suspect, seen these kinda post a thousand times on several forums over the yrs. Look at it from my point of view tho, how is anyone supposed to know you're a genuine member or not when your membership shows as new to others & the content of your post isn't what we come to expect to see on what appears to me to be well managed forum, many forums aren't & all manner of posts are left clog up the system unchecked by admin, basically ruining what could have been a decent forum. Only admin would have half a clue that you may or may not have been a member under a previous screen name. Seen hundreds of dodgy profiles over the yrs that scammers set up to diddle other members outta bike parts via bank transfer scams. Look at it from my point of view, your post looks a bit suspect, does it not? I've been around this VFR forum & several other for yrs, not been able to join VFR'd until recently due to some glitch with system not accepting my email address. Anyway, if you're a genuine guy, then welcome, I sort of apologise if my reply to your post came across harsh, but at the end of the day most of us don't know any other member in person, we're all keyboard warriors so to speak & looking for something interesting to chat about. I'll get my coat!.
  24. Captain 80s
    Left work a tad early to beat some of the traffic into the valley. This is near Carnation Farm with Mt Rainier in the background.
  25. Philois1984
    Any ideas why my gear lever has started to feel clicky (best way I can explain it) when I change gears? I have had the bike from new, now has a mere 47,600km on the clock. Have had no other issues. Always found the gear box to be very smooth. It has also started to stay in the current gear when I try to change up a gear, although this doesn’t happen often. Downshifting is smooth and once in gear feels perfectly fine. I don’t have a quick shifter, oil is only a few thousand kilometers old. Clutch has a few millimeters of slack before engaging. Any ideas guys and girls and gender neutrals.
  26. St. Stephen
    Haha, hang in there Exuptoy. This is one of the friendlier forums you will find on the interweb, with an incredible wealth of VFR knowledge. And as of right now you have a rim and a swingarm more than me when it comes to owning a VFR! There's a bunch of folks here who stop what they're doing and contribute their time and knowledge to help someone they've never met get a V4 running again.
  27. Hamzau
    Hamzau joined the community
  28. Yesterday
  29. gropula
    Look at the image of the stock headers.
  30. Exuptoy
    I didn’t want to go there but when I checked his history he joined at the end of 23. Captain been here since 05! Says it all really, however I didn’t come here to stir the pot but it’ll take more than an angry member to dissuade me. I’ve been reading stuff on this site for a while and decided to join as some of the threads are interesting. Ffs, if you Google fitting a vfr swingarm you get a handful of links to this site, so not a very good advert for membership if someone finds this guys reply.
  1. Load more activity

  • Blogs

    1. HispanicSlammer

      A blog by HispanicSlammer in General

      • 122
        entries
      • 565
        comments
      • 289974
        views

      Recent Entries

      HispanicSlammer

      med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. MartinkaP's Blog

      A blog by martinkap in General

      • 8
        entries
      • 77
        comments
      • 31572
        views

      Recent Entries

      martinkap
      Latest Entry

      I Am Back !

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.

  I accept