-
Featured Gallery Photo
Wolverine & Deadpool
Just had to take a pic while they where together
All Activity
- Past hour
-
I have this problem when i am shifting from 1st to 2nd to 3rd in high speed it does not like to shift very smoothly, is that something to with the engine oil?
-
When i got my bike it came with delkevic’s full Exhaust system and a power commander 3, i don’t know whether it has a catalytic converter or not, its not that loud.
- Today
-
https://cults3d.com/@Bart_VFR this guy has the designs for 3d printers to print parts for the 4th gen vfr https://cults3d.com/en/3d-model/various/restore-your-classic-vfr750f-rc36-gen-2-94-97-side-fairing-cooling-air-scoop
-
That is a gorgeous bike, congrats.
-
Thank you so much for the warm welcome and all your help and suggestions guys. I really appreciate it and it's really made me comfortable to pull the trigger. So, I did it. I took her out. Did all the checks. She's for want of better word, immaculate. How the f*ck a 25 year old bike remains in this condition is beyond me. And that Black Widow exhaust sounds like the gates of hell have opened. It's awesome. So, I am now the proud owner of a 2000 VFR800. Got her for 2k. I pick her up tomorrow. Can't wait.
-
Barely run-in. Ask for a test ride.
-
Check the connector that plugs into the starter solenoid. They are known to fail (melt) due to heat from resistance at the connectors.
-
Sounds like a buildup of corrosion somewhere or an intermittent short or bad connection.
-
At a guess, a previous owner has replaced springs, possibly a stiffer spring of different (longer) length and then compensated for the removal of spacers by winding the preload right in. The washer 6 misplaced at the end of the damper could just be an error. Ideally 6 is placed under 5 to ensure they centre. Some aftermarket springs require modification/replacement of the spacer to keep the system within the design length. I guess the fundamental issue with your current setup is that you can't increase preload, only reduce it. But then you say the setup is working okay...... Others may have advice grounded in experience.
-
Welcome from Ohio, USA! 🙂 I would buy that bike in a heartbeat. Maybe less. Please let us know how it turns out for you!
-
Anders joined the community -
G'Day fellow VFR lovers. I stripped front forks to replace leaking seals and bushes on my 1991 Australia model VFR750F RC36 and found a few strange things. First fork spring length around 425mm according to 91 specs should be 413.6mm and tight coils at top. Top preload is wound fully down flush with top nut and not 3rd notch from the top. There are no preload spacers as per 93 model. Slotted seat washer on top of spring but item 6 below was found elsewhere on bottom damper rod between lower rebound spring and oil lock cap as per diagram. To be honest front suspension was ok before, just reassembled it same order apart from the fork springs with tight coils on top. Concerned now I will need to strip it again, and put washer 6 on top of fork spring. I have not road tested yet as awaiting fairings to be painted. Any thoughts on why the differences to Honda standards??
-
I did check the fuel pump, it's ticking fine... anyway, that would not account for the cutting out, I mean ALL the lights go out as if the key had been switched off. Further examination reveals that the yellow wires leading to the rectifier get red hot after a few minutes to the point of sticking together... but what could be causing that?
-
firefighter joined the community -
Many, many MANY years ago I started taking my first step in this magic world of motorcycling. My first moped, 50cc, 4 gears and shift lever like the REAL bikes; the first dumb trials, the first falls. It was the beginning of an adventure. Now it's my son's turn ❤️ Yesterday he tooks his first steps. The first dumb trials, the first falls... everything like (A LOT OF 😅) years ago. It's a moving thing. Don't know how to explain. It's just like the baton has been passed. He is me; I am him. And the wheel's still spinning ❤️
-
- 2
-
-
Smart eye, Maine. Every summer I'm used to store about 50 hundreds of wood cords in the box for the winter: I live in a mountain area of northern Italy (close to Dolomites). Winters are looooong and cold, so we run a stove in addition to the standard heating system. I do love hearing the fire crackling, and the kind of heat coming the fire isn't comparable with anything else; it's kinda magic. Just to give you an idea, this pics is taken from where I live -
So no 85 750 Canada spec?...I'll have to look for some serial # on the carbs...any idea where?.... As for the cams.. regardless of my pitting in running them as is ..I give it a good old college try...between that...a plug wire that may have never been working ( plug looked new)..and an overlooked under tightened carb boot...I think she's gained a pony or two....another question...the line up rivits on the intake/ to carbs...is that a leak if you don't use them? And from the manual It looks like there's rubber boots inside that come off the carbs??? Is this correct? And if I don't is it a huge deal .or just a technical.for high performance venturi.....?.. cause I don't got them and I wasn't using them .....
-
The sticker says 85...but the date stamp is 84/9 I think ... I have a 500 from the same year and carbs are different...the intake is shaped like a "D"...these are like an "O"... I tore it down and messed with everything but the carbs again tonight.... And I think I solved/found a few things..and it's coming alive .a little bit everytime I tear into it... tomorrow I will be playing the mixture screw game...and possibly with the diy sync tool...(that I've grown to hate)... These carbs are the worst..why did they angle stagger them ...what was wrong with 4 in a row .all together, so tight you could have them fall off and run over ,and chuck em back on..and go ...better yet I miss my 929..... Injection now that's better .had it for 3 years never touched a wrench to it besides the tires. And chain ..bliss...thanks for the knowledge! 😃
-
VTCAL joined the community -
Welcome to the forum, that is a nice pick up at quite a fair price. The judges here in northern New England say "dream realized". I don't recognize the high mount exhaust you have, but I'm willing to say one of the PO's dropped quite a few £'s to install it, they are not especially cheap. You might want to consider putting a DB killer in it. This would alleviate having to find a decent oem or aftermarket exhaust for a 25 year old bike and probably be the cheapest option to boot. I found these guys listed in the UK. I have no affiliation with them at all, but you might want to give them a call with your info and see what they can offer. dB killer/dB eater - CafeRacerWebshop.com If you really want to remove it, I have no doubt you could sell the whole system in a heartbeat. You might get lucky and find a quieter can that uses the high mount, or an oem one sitting in a garage because it was removed for an aftermarket. system. I certainly understand though that you want to be a good neighbor. I like the color BTW.
-
You mentioned the bike was 40 years old, so I assumed it was an 85 VF750, both the 83 and 85 750's use 128's all around. The 84 750 used 110/112 - F/R I assume because of the different carb bodies. I have attached the carb spec page out of my Clymers. Hopefully this will help identify what should be in your carbs. I'm also including a link to Mike Nixons thoughtful article on the cam issue. I'll let you decide for yourself, but based on your description, I would not worry at the moment. Also, some bikes had their cams replaced eventually by Honda. Have a quick look at the engine serial number and see if there is any extra marks or stamps. I bought one of the first Honda CX500's in the states and had to bring it in for a stator recall then a vibration dampner recall. Both times the shop stamped the engine as having the work done. Pretty sure they were doing the same in the 80's v4 cams what really happened www.motorcycleproject.com Good luck.
-
Dechupa joined the community - Yesterday
-
Fuel pump/fuel relay can give issues with supply to carbs, pump has points that sometimes(rarely) need dressing/ cleanup, relays can work intermittently but bypassing restores function to pump, that’s an easy thing to try…
-
Those symptoms sound more like a fuel delivery problem than anything else. Particularly that it comes right after a few minutes rest. Maybe a blocked/pinched fuel tank air vent, or a restricted fuel supply to the carbs e.g. a vacuum valve not opening fully or a kinked hose.
-
Welcome. I have one just like it, but '01. (There's a slight difference in the "VFR" decal between '00 and '01.) OEM exhausts are available... Ciao, JZH
-
The 5th gen is a fine ride... of course then I'm biased, I own one. Purchase that bike, if you havent already.
-
Davyrc joined the community -
Bike just came from service, so maybe my mechanic scuffed wire somewhere? It starts fine, starts missing around 2.500 rpm, above that runs strongly but gets progressively worse until it cuts out completely. Few minutes rest, comes back. Sounds like battery is being drained, but it shows 12,7 at rest, 13,4 running, if it was short-circuit to the frame it would not cut at any particular revs., any other ideas? Rectifier is new(ish) and am told it would not cause cutting out anyway...
-
I did have some different mufflers but I've put them back to stock...your correct I never checked what size was in there..also yes this is Canadian model. That said I thought I've seen two different sizes front and back for the jets ..and different springs. And needles ...(.this is mentioned in a manual)... Just so happens I found a fuel filter in it's original spot .. probably from factory...that I was fighting against for the first three weeks of this build .. someone added in lines and I had no idea there were more ..it had about half pound of shit in it .. So after I made the original post I figured I might as well tear it all down AGAIN..and venture into the unknown..well out of my comfort zone...and dip into the cams... And doing so I've found a little bit of pitting on a couple....so how much is acceptable before it really hinders.? Obviously a guy wants none but I'm not looking to put a bunch of cash into this one . I don't think it will ever do what id like.(performance wise.).. Thanks for the thread as well..I'll take a look. There's not alot to it..not sure what could not be working besides wiring...but visually seemed fine...same results after I put it back together...turn on and no lights.. yes I need to get another multi meter..mines grown legs... I'm going to try and check the valves and put it all together again...go through the carbs..things seem to get better every time I tear it apart ..there's always something to learn or fix .thanks for the help I'm sure I'll be back with more questions...thanks again..stay tuned.
-
Hi all. I've been after a VFR in one form or another since 1999. I had a white VFR 750 on my bedroom wall when I was growing up. The thing I wanted most in the world. My mum essentially banned me from motorbikes. My older brother was a little 'unruly' and rode motorbikes. Broken legs. Arms. Didn't do me any favours, thats for sure. So, I got into cars. But that urge never left me. I promised myself that once our three kids had flown the nest, I'd grab my dream. I did my CBT, bought a CB125R and began my dream. It took me everywhere. I sold my car. My profile pic says it all. It never skipped a beat. Apart from the time I washed it in petrol (long story😂). I've been saving for three years for an 8th gen in white. Stuff happened. Money went, leaving me £2100. So, I've changed my target. This is in a dealer round the corner. 23k miles. Service history. 3 owners. 2000 model. £2100. It's fate, right? Blue though. And that exhaust will have to come off. I live in a terraced cul de sac. I start work at 0100. I imagine the neighbours will set fire to it quite quickly. Thoughts? Am I mad or is it my dream realised? I've done my research, but would love some real world advice. Thanks. John.
-
Blogs
-
- 122
entries - 565
comments - 296653
views
Recent Entries
Latest Entry
The Last Day Of Good Riding Weather
Juniper Pass
I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.
I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.
Lookout Mountain - Golden Colorado
Zoomed in
Lookout Mountain Park top of the mountain
From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped
Tommy-knockers Brewpub Idaho Springs
Idaho Springs Colorado
Mashtuns and fermenters
Rows of fermenters
I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS
Icy patches on Squaw Pass definitely taking it easy on that road
There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!
I did stop for pictures in all the best spots
Echo Lake at Mount Evans showing off my new plate
Elephant Butte Park and Denver
Close up
Veefalo on Squaw Pass
Juniper Pass
Juniper Pass
Mount Evans
My route A is home B is Tommy-knockers
- 122
-
- 8
entries - 77
comments - 34285
views
Recent Entries
Latest Entry
I Am Back !
Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.
Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.
My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.
With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.
So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.
Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since
Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.
I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:
- 8
-
-
VFRD Mission Statement
For owners of the Honda Interceptor and related Honda V4 motorcycles, for the purpose of mutual help concerning safe riding, maintenance, and performance of their motorcycles.
Rules of the ride - No one goes to jail, and No one goes to the Hospital.
Contributions - VFRD is a member supported website with no commercial advertising.
-
Forum Statistics
-
Total Topics26.4k
-
Total Posts361.5k
-
-
Who's Online (See full list)
-
Member Statistics
-
Upcoming Events
No upcoming events found -
Latest Classifieds
-
-
Top Downloads
-
-
Popular Contributors
-
Blog Statistics
-
Total Blogs116
-
Total Entries345
-
-
Gallery Statistics
-
Blog Entries
-
-
Blog Comments
-
By vfrpilot28 · Posted
I enjoyed reading this and seeing your story. For the love of motorcycling! -
-
By interceptor69 · Posted
Oops. I do believe I know how to post YT videos or they wouldn't be on YT. However I may have screwed up copying the link to the playlist. Thanks for the helpful comment. -
I think that you might not know how to post videos. You're in your YT studio in these links. You need the link to the actual video. -
-
-
Most Contributions
-
