Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Hi guys Its looong time ago but i started my on project like this guy but i have used honda vfr 800 fi year 2000, then i wanted better forks sooo I used from 2005 honda cbr 600rr, rear swing arm is from 954 fireblade the only remanig part from the vfr is frame and engine even the electronic is different I use parts of the honda cbr 600 rr like signals, lights, and dash board. Its 2 years since I started this project if you want me to ask any questions iam here for it
  3. Today
  4. Im a bit late to the party here but im about to do the same rear conversion. You mentioned a 33mm brake line. Was that a typo for 330mm or anything?
  5. Thank you. I will look for sure. Luigi.
  6. I think to move the oil radiator in front fairing. More i've installed in line to the oil filter an intercooler (connected to the water flow) coming from a CBR 900. (in pics are difficult to see, but there's) Then as i reply above, i can use the lower space to install, instead the single radiator for water, a pair for water coming from a motocross bike. Thank you.
  7. I see your point 🙂 Take look on this topic And also how about this idea? This might be little bit crazy but it might work well on your project. https://thekneeslider.com/vtr-1000-super-hawk-another-super-subtle-custom-build-by-alex-zemlin/
  8. You said right (i have a CBR 600 F4i for track days too) but this project aim to hear again the "growl" of V4. So little room between exhaust and radiator don't like me too. I positioned in that way to check the distance from front wheel and radiator when fork are bottomend down (as in the hardest breaking) and that situation there's no much space.... I agree for a curved radiator, but i have no idea from what bike could give me this parts. Another solution can be, instead of the one-piece lower rad, a pair, little bit small coming from a motorcross bike. The overall width of VFR are not as a CBR 1000, for example, and this solution maybe not affect the overall bike width, also with fairing installed. Thank you for your reply.
  9. FYI, if you're going through all the trouble of getting to the thermostat you might consider a silicone hose kit upgrade while you're in there. Make sure to stuff some clean shop wipes or even paper towels into throats of intakes once you have the throttle body off. AS3 has their kits listed on eBay, they've even replicated the two wax idle hoses which may be a separate listing. Make sure you get their clamp kit with the smooth inner surface. Stock worm gear clamps that have the gear protruding through slits will shred silicone. I had a short thermostat pod hose split on a 2000 afternoon commute some years ago. That was fun. If you really feel like spending $$$$, SAMCO has a five-ply hose kit.
  10. Hi FromMaine, Thank you for your donation of 30.00 USD. We look forward to improving the forums with your donation. Thanks VFRDiscussion
  11. Yesterday
  12. Hi Lorne, Thank you for your donation of 50.00 USD. We look forward to improving the forums with your donation. Thanks VFRDiscussion
  13. I have had similar overheating symptoms develop twice on my 2001. The culprit has been the OEM thermostat only opening 1/3 to 1/2 even at the high temps. I have tested both the thermostats I have removed and the new replacements on the stove while watching the water come up to 210 F. The difference in how far they open is very obvious. The old thermostats have had no corrosion or deposits; in fact they look identical to the new ones, yet they have failed to operate correctly. Somewhat disappointing for a $50+ part that should have been perfected decades ago. I have had the bike since new so I know the temperatures it normally runs in weather from 30 degrees to 110 degrees, and in various traffic conditions. The cooling system struggles a bit in very hot weather when stuck in traffic, however the thermostat problem creates a rather obvious departure from those normal temps and causes the temperature to rise very quickly in warm weather. Regarding all the vacuum hoses, if you still have the stock hoses, Honda has done us a favor and labeled each of the 15 hoses to match the diagrams in the factory Service Manual (page 5-66). I still mark each one with different colored tape to ensure I get it back onto the correct fitting, but it's not as daunting as it might be due to the unique hose numbering.
  14. Thanks Burger, it had occurred to me also that maybe the fan wasn't up to the job at really high ambient temp, as this issue only occurred at those times. That fan you linked to looks pretty nifty! vfrgiving: I do in fact have an IR thermometer and should have thought of that. Thanks for shaking the cobwebs out of the old noggin. Only issue at the moment is the bike is on an unheated garage. Temps last night went to -15f, I don’t think I could get the bike anywhere near operating temp at the moment. 😁
  15. A set of new aftermarket injectors (made in Japan) with all new rubber o-ring/cushion/seal are cheaper than buying a set of o-rings/cushion/seals seperately. Thats crazy!
  16. Désolé je suis pas vraiment doué Mais bien remplacer stator et régulateur et batterie ensuite comme pas de résultat modifier régulateur 2 vert et 2 rouges direct batterie Mais non alors mis justes le rouge sur la batterie et les verts masse vis près du réservoir la mon testeur sur vert et rouge 14v je repose vert sur batterie chute a 11v7
  17. Il monte pas a 12v oui si je charge la batterie a fond je suis a 12v mais ne monte pas juste 0.2 ou 0.3 v en plus Sans les ampoules avant je monté a 12v6
  18. What comes after 11v 5?
  19. J ai un soucis de charge j ai remplacer le stator le régulateur la batterie et toujours 11 v5 j ai fait modification des câbles au niveau du régulateur afin de mettre à la batterie en direct toujours pareil lorsque je met le rouge venant du régulateur sur la batterie et les noirs sur la vis du réservoir j ai 12v6 Mais dès que je met à la masse batterie 11v 5
  20. I put the Rapid Bike module in my 8th gen so I didn't have to flash the ECU, I couldn't be happier with it
  21. I love mine as well but the autotune clearly doesn't work right. I have the Bluetooth dongle as well so I can data log the AFR, RPM and TPS. The autotune reacts to throttle input enrichment by enleaning the mixture. Then it tries to correct this by going overly rich in the next cell. Then you get -15 in one cell and +15 in the next one. Spiky, silly, useless map. I've done the data logging with the dongle, filtering and averaging the data in excel and produced the final map for my bike. It doesn't resemble the mess that autotune created whatsoever. The logs confirm that the AFR is as targeted, the bike feels good. With autotune map it just gets worse and worse as it does it's thing, to the point of stumbling and misfiring because it runs so lean.
  22. Nah - RBR fixes a lot of the 6th gen's underlying issues very well, that I haven't otherwise been able to completely resolve since I bought it in 2003. Couldn't pay me to remove it from my bike.
  23. My gut tells me your thermostat is probably opening. Wheel the bike outside and have an IR thermostat gun in hand. Pull one of the side plastics, maybe the right so you can get a good shot at the radiator. Start the bike and watch the radiator's temp with your temp gun and the indicated temp on the dash. During initial warm up as the bike temp climbs you should see a slight slow rise in the radiator, but nothing drastic or hurried. Watch the VFR approach indicated 180 on the dash. Around this time you should observe a rapid rise in radiator temperature as the thermostat begins to open. If this occurs, congratulations your thermostat is probably fine. If you're still not convinced this way, pull the current thermostat and dunk it in hot water as per the service manual.
  24. Thank you so much you just make my day 👍
  25. i think the larger culprit is that the stock fan is just not fit for purpose. my suzuki was having similar problems; when the summer would hit here in tejas, the fan would come on and the temp would just continue to climb regardless, even with a fresh coolant flush and new tstat. swapping in a nice beefy 5" spal unit fixed the problem, though i had to wire it to a switch and relay because the original fan circuit just couldn't handle it. admittedly my vfr isn't quite yet in a running state, but i did put power to it and feel the airflow from the fan just to see if i'd be potentially dealing with the same issues, and a typhoon it sure ain't. even though the spal is a good bit smaller, it flows a whole lot more air. of course the problem we run into is finding one that'll fit, considering the distinct lack of space between either radiator and the engine. this mishimoto unit appears like it'll fit the bill; i ordered one and have it on my shelf ready to go in, but up until just recently i've just been too busy with life things to turn any wrenches. fitment results will be forthcoming.
  26. Somewhat recent content from 44Teeth if you don't know where to start.
  1. Load more activity
  • Blogs

    1. med_gallery_491_3463_298783.jpg

      Juniper Pass

      I took a day off from work and also from my bicycle training to take out the Veefalo one last time before the weather turns ugly, supposed to snow the rest of the week and possibly start sticking to the ground along the Colorado Front Range. I took a leisurely pace up hwy 105 toward Morrison and got reacquainted with the bike since its been over a month since I took any sort of twisties on it at all, hwy 105 is a scenic ride along the front range between Denver and Colorado Springs, its mostly easy fast sweepers and lite traffic so its a favorite road of mine when going north. Then I have to negotiate a bit of traffic near Highlands ranch and up hwy 470 into the mountains. I decided to take the Morrison Exit and try either Lookout Mountain or head up Golden Gate Canyon - this time it was Lookout Mountain, I was sort of making it up on the fly as I went along. Lookout Mountain is my old bicycling haunt from my days while I was working at Coors, its a killer ride and all uphill - I don't think I could do it today If I had to, not quite there yet! I saw a whole bunch of riders doing it though and wished I was in shape enough to be there doing it as well. 30 more lbs and I will be able to do it! On this day I would do it on the Veefalo instead.

       

       

       

       

      I took a video from the gateway to the top at the Lookout Mountain State Park, getting past riders, the guy in the green jacket actually pretty much astounded me with how far he had gotten in the short time it took me to set up my camera, some 3 miles at least and up to the gateway from the turn off at hwy 6! Amazing I thought. I took the first two turns slow then got more comfortable as I went up further, till I was doing well, I made some gearing mistakes and took the tight 15mph marked hairpins in the wrong gear so I lugged it a bit on one or two. Still enjoyed it though and then got off at the top and hiked over a rock outcropping for an overview of the road for the pictures below.

       

       

      gallery_491_3463_225077.jpg

      Lookout Mountain - Golden Colorado

      gallery_491_3463_460686.jpg

      Zoomed in

      gallery_491_3463_96202.jpg

      Lookout Mountain Park top of the mountain

      From there I headed up interstate 70 to Idaho Springs for a beer at the Tommy-knockers brewery, I was the only customer in the joint - slow day for them so they treated me like a king! I got a nice tour of the place sort of impromptu, they made me a nice Pastrami sandwich on rye and with the brown ale it was fantastic. I must say the beer is much better there than in the bottles - its always good at the brewery. I am glad I stopped

      gallery_491_3463_328875.jpg

      Tommy-knockers Brewpub Idaho Springs

      gallery_491_3463_290342.jpg

      Idaho Springs Colorado

      gallery_491_3463_432219.jpg

      Mashtuns and fermenters

      gallery_491_3463_278071.jpg

      Rows of fermenters

      I finished my lunch and since the road to Mount Evans is right there I headed up Squaw pass hoping to get in some nice pictures I wasn't expecting what I found, ICE IN ALL THE SHADY PARTS

      gallery_491_3463_419309.png

      Icy patches on Squaw Pass definitely taking it easy on that road

      There were some section where the ice covered the whole road for 300 yards or so I had to roll through it with my legs out to help keep the bike from sliding and falling over, I took it real slow. A Ford pickup was right behind me so I pulled over to let him pass but the guy was going slower then even I was so I pressed on - in places where I could see I just cut over to the oncoming lane and out of the ice where the sun was shining on the road more, but some places there was not alternative so I just had to go slow, good thing it wasn't slick but rather they tossed some gravel over the worst parts so I had some traction!

      I did stop for pictures in all the best spots

      gallery_491_3463_338944.jpg

      Echo Lake at Mount Evans showing off my new plate

      gallery_491_3463_562075.jpg

      Elephant Butte Park and Denver

      gallery_491_3463_271364.jpg

      Close up

      gallery_491_3463_12419.jpg

      Veefalo on Squaw Pass

      gallery_491_3463_298783.jpg

      Juniper Pass

      gallery_491_3463_291678.jpg

      Juniper Pass

      gallery_491_3463_385846.jpg

      Mount Evans

      My route A is home B is Tommy-knockers

       

    2. martinkap
      Latest Entry

      gallery_7692_2036_18129.jpg

      Not that it matters and not that I expect anyone had noticed, but to those who sent me "where are you?" I would like to say I am back. Not only that I am officially returning to VFRD after nearly 2 months break but I have also ridden my Hawk last weekend and had FUN! Let me restate that; I had major fun riding! Something I have almost given up on.

      Most of you have been riding your whole adult lives and riding is not only a hobby to you, it is part of you. But I started riding three years ago and even though I have encounter some setbacks, till this spring I loved riding with whole my heart. However, I have always considered riding as my hobby. As a hobby which suppose to make my life better, more fun and more rich. Life is too short to do something which we don't fully love.

      My love of riding received a first major scar this spring: I lost a friend on the racetrack. He was a total stranger who offered me his help after I lowsided at CMP track last year. I still remember hearing his "Hi, my name is Todd, do you need help?" while I was duct-taping my roadrash from ripped jacket. He helped me straighten up the shifter and we kept in touch. The next time we saw each other was the day he died.

      With 9 months delay, I can say that Todd's death shook me more than I have realized. It rooted fear in me which was fueled by seeing and hearing about others getting hurt over and over again. If I was to summarize this year - it would be one big accident report. I became sensitive to every broken bone, every roadrash, every lowside. And even though I did 10 track days this year, I became slower and slower and slower. Suddenly, I have acquired this 'grandma' riding style on the road, frozen with fear that behind every corner there is car standing in my lane, or major sand trap or deer staring at me ... I was crippled with fear not only for me about also for my fellow rider.

      So, at the end of this year, I rode more and more by myself. I could not bear the feelings of responsibility for others on the road and my lines were crippled by my own fears. It all culminated this fall at WDGAH. In a freaky accident Love2rideh82crash was taken down by a truck crossing into our lane. I was done. I finished the weekend, locked the VFR into a garage and took a break.

      Until the last weekend, I pretended that motorcycles do not exists. As a last instance after 2 months break from riding, I decided to go to CMP track to see if I can still have fun. I also felt like I should go for the memory of Todd. I went and I had fun! I had much more fun than I expected and the most fun on track I can remember. Suddenly the whole track connected into an uninterupted line of turns and I felt one with the bike riding around! I was giggling like a little girl in my helmet and keep on giggling ever since smile.gif

      Granted I was not the fastest one and through out the weekend, I have never exceeded about 60% of my riding abilities, but I had no "oh-shit" nor 'blond' moments. I could have maybe go faster, I could have brake later for the turns and I could have lean further, but I am no Rossi nor Stoner. I decided to ride for fun and I had amazing blast riding well within my comfort zone.

      I was proud of myself when, after bandaging Ricks arm, I was able to distance myself and go back to riding without the year-long fear. I did feel bad for him but the feelings were not crippling my lines nor my mind. And when a total stranger came to me and said "Hi, my name is Todd", my heart stopped for a minute though but I suddenly knew that my life went a full circle. I probably will never win MotoGP :idea3: , but I am back! :wheel:

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.