All Activity

Thanks for sharing Fabio. There's nothing like a little quality time on a motorcycle to help sort out one's thoughts and emotions. It is my preferred type of therapy.

Этот интересный отчет представляет собой сборник полезных фактов, касающихся актуальных тем. Мы проанализируем данные, чтобы вы могли сделать обоснованные выводы. Читайте, чтобы узнать больше о последних трендах и значимых событиях! Разобраться лучше - https://vivod-iz-zapoya-1.ru/

В этой публикации мы предлагаем подробные объяснения по актуальным вопросам, чтобы помочь читателям глубже понять их. Четкость и структурированность материала сделают его удобным для усвоения и применения в повседневной жизни. Выяснить больше - https://vivod-iz-zapoya-1.ru/

Предлагаем вашему вниманию интересную справочную статью, в которой собраны ключевые моменты и нюансы по актуальным вопросам. Эта информация будет полезна как для профессионалов, так и для тех, кто только начинает изучать тему. Узнайте ответы на важные вопросы и расширьте свои знания! Подробнее можно узнать тут - https://vivod-iz-zapoya-1.ru/

Эта публикация завернет вас в вихрь увлекательного контента, сбрасывая стереотипы и открывая двери к новым идеям. Каждый абзац станет для вас открытием, полным ярких примеров и впечатляющих достижений. Подготовьтесь быть вовлеченными и удивленными каждый раз, когда продолжите читать. Получить дополнительную информацию - https://vivod-iz-zapoya-1.ru/

В этой публикации мы сосредоточимся на интересных аспектах одной из самых актуальных тем современности. Совмещая факты и мнения экспертов, мы создадим полное представление о предмете, которое будет полезно как новичкам, так и тем, кто глубоко изучает вопрос. Получить больше информации - https://vivod-iz-zapoya-1.ru/

Эта информационная заметка предлагает лаконичное и четкое освещение актуальных вопросов. Здесь вы найдете ключевые факты и основную информацию по теме, которые помогут вам сформировать собственное мнение и повысить уровень осведомленности. Подробнее тут - https://vivod-iz-zapoya-1.ru/

Предлагаем вашему вниманию интересную справочную статью, в которой собраны ключевые моменты и нюансы по актуальным вопросам. Эта информация будет полезна как для профессионалов, так и для тех, кто только начинает изучать тему. Узнайте ответы на важные вопросы и расширьте свои знания! Подробнее можно узнать тут - https://vivod-iz-zapoya-1.ru/

Hi Sirbike! I remember the name from the ST1300 site and also met you when you stopped out to help me with some ST questions. Cool to see you here! I have since sold the ST1300 and gotten a 2014 Valkyrie and 2010 VFR1200F. Jim

My RC26 build, I initially used CBR triples. Pretty much maxed out what the swingarm could take as far as rear ride height and has short CBR forks. Also zero sign of instability, at any speed. Frequently got the front end air-born at near triple digits on a particular stretch of road. No drama at all when the tire came back down. I switched to 41mm VFR triples, but not because of any dislike of the handling. Only because the lower triple was designed to interact properly with the frame stops. The bike got "livelier" at low/moderate speeds with the VFR triples. Still rock solid at any speed.

Santa (or is that Sinterklaas?) came early this year! After over a year in transit and storage (and importing company hassles), my yellow bike is finally in its new home in the Netherlands. I hope the change in weather isn't too much of a shock for the old girl... As this is the only bike I have here, and it's now officially winter, I think I will take this opportunity to finish the brake and suspension upgrades. It's already cleared customs, so inspection and registration in NL can probably wait for a few months. I have an SP1 front end (with a matching Pearl Yellow mudguard from some sort of CBR900RR, I believe) and will do the same de-linking and brake-line-through-the-swing-arm I did last year on the blue bike in London. I'll also swap the Compufire reg/rec (don't ask) for a proper Shindengen SH847 and finally trim the RHS fairing to clear the supercharger belt. However, I've noticed that the tires have great tread...but have a DOT code from 2008! Ciao, JZH

Might have to do with the fact that the VFRs (RC36 and RC46, anyway) all have a 40mm fork offset to start with, whereas the CBR900 and VTR1000 have 30mm offset. (VFR1200 splits the difference at 35mm.) Thus, raising the rear of a typical VFR nudges it towards/into sport bike territory--without straying into the steering-damper zone... Ciao, JZH

Oh... I guess it could have fallen into the wrong box of parts, lol. (Better to learn that now than when I'm all set to install it in my 5th gen!) Cheers, JZH

Few things to say: Stainless bolts into aluminum is a big no-no. Look up galvanic corrosion. You can try coating them in some kind of anti-sieze, but my experience is that doesn't work all that well on stuff that doesn't get dis/re-assembled on a regular basis. Screw extractors don't work all that well on small, soft, fused stainless fasteners. You don't want to end up in reverse drill bit Heli-Coil land. I have some hard plastic wedges for popping covers off without gouging them. They work well, and are dirt cheap so easily replaced when they fail. Wood works well too in a pinch. A chisel X-Acto blade works great for scraping gaskets, and is more forgiving than a hardened scraper on aluminum. Clean the crud off before you start work so you don't become a human rag. Other than that looks great!

Very informative write up.👍

And that bike, if wrapped in VFR style bodywork with suitable sport touring ergos could be the thing we'd all hoped for; all day comfort, sporting intent, less mass and more power and torque. We will see.....

I saw this story and ran here to see if anyone commented on it. I’d love this to be true but Honda is definitely releasing a V3 with an electric supercharger next year. Why would they also go for a V4?

Quiet in the office at 07:15 Still a looker 31 years on..

Cool thread, @Gaz66. Sounds like you’re in the UK, and I’ve just gutted a Factory Pro star kit to my 5th Gen. if you want my old star and arm you can have them free - just cover postage. I’ve seen people modify these by rounding the peaks. This helps the shift happen faster, but you need a stronger spring to stop it popping out. Roller bearing also helps. Guy on YouTube does it freehand - it’s not rocket science. I’d just use a bench grinder with a flat plate. PM me your details and I’ll get it to you. Send your number and we can talk it through.

It’s been a while since I posted due to “life” happening. Thought I’d update with some winter maintenance. Oil-and-filter change this season after 5,000 miles, including two track days and a dyno tune. Using good oil pays dividends when you’re bouncing it off the rev limiter. Motul 300V still looks good despite the thrashing it got this year. Still smells like bananas! Oil still kind of yellow… Few flecks of fine metal at the bottom of the oil pan, as expected… With the oil out, it’s a perfect opportunity to fit the Factory Pro Shift Star and Detent Arm kit from our last group buy. Another member changed his mind after I bough it for him, so it’s going on my bike! I leaned heavily on @kaldek post here for directions. Big thanks, mate! Kaldek’s guide is great so I’m not going reinvent the wheel. If you’re fitting one of these, use his awesome guide. Here’s my kit, which includes the shift star, detent arm, detent arm spring and gasket…and some cool stickers! First job is to tear away at the shifter housing to get at the clockwork. Clamp to keep the clutch slave piston from popping out… Marked the gear shifter with a punch so it can go back on at the same angle. Look at the filth from a British winter! If it was filthy outside, it was grotesque inside. All that chain grease and road grime congealed together. Chain looking poorly too… The inner shifter cover is a BITCH to get off but I found one spot you can get a screwdriver behind GENTLY… After finally wrestling it off, I realised there is one good spot you can put your fingers behind this cover and pull it off. Bit of a cleanup with WD40 and some rags… New shift shaft bearing and seal while we’re in there. You can see a little piece of the inner cover broke off (right end of the crescent) More of that later… Old seal and bearing removed. No science here - just screwdriver and hammer on the inner race of the bearing. Torching the outer housing helps get it out a bit easier… Used a socket to drive the new bearing in. Again, some heat to expand the hole makes it easier. Seal just pushes in with a slick of grease. Pushed some good grease in to the bearing… Back to the broken piece. I tried to braze it back on but failed as the sliver was too small. JB Weld to the rescue! Here are the OE parts (top) vs the Factory Pro parts (bottom). The new shift spring is a bit firmer. The shift star has rounded edges so gears click in better. The arm has a ceramic bearing on the end, as opposed to the plain bearing on the OE one, so should roll over the start points nicer. Some good grease thumbed into the shift bearing. You can see the little post on which the shift star orients itself. I turned it all the way clockwise (1st gear) Shift Start bolt gets threads cleaned and loctite applied. Few notes not on Kaldek’s thread: 1. You don’t need to put the bike in gear to loosen-or-tighten the shift star bolt. It just rolls all the way to 6th gear when you undo it, and rolls all the way to first gear when you tighten it 2. The shift star has a single hole in the back that fits on the shift post. BUT, the star doesn’t go deep enough to make good contact and it can slip out of the post. You have to be gentle and make sure it goes directly on the little post 3. You MUST cycle through all the gears when you’re done to make sure the shift star is in the right position. It’s the only way to tell as you’re working blind and by feel Here are all the parts installed, in 1st gear position. Once the star, arm and spring are installed, I put the shifter shaft in and the temporarily fitted the gear lever to cycle through the gears. Unfortunately the old gasket tore as it came off, so it needs to be replaced. Used a new razor blade and a wood chisel to scrape it all off. Hateful job but needs to be smooth for a good seal. Don’t worry about polishing, though: paper gaskets need the little scratches to adhere. Looking decent after 20 minutes… Now to do the same on the engine side. Will this nightmare never end! At long last! Make sure to clear all bits of gasket from internal areas and I blocked off the water pump hole. Time to dit the new gasket. I don’t want it tearing again if it ever needs to come off again, so I smeared the engine side with some copper grease. This way it’ll come off on the cover side, which is easier to scrape if necessary. Replacing bolts with stainless as I go. Brake fluid leaks of the past aren’t kind to OE bolts. Pulling the sprocket back on to the shaft is ALMOST impossible if you don’t slacken off the chain but it can be done if you’re stubborn like me. Would have been quicker and easier to slacken the chain but…yeah, stubborn! All back together. FINALLY! Whilst covered in muck and crying on my knees, thought I’d clean and adjust the chain. What’s a bit more filth, eh? WD40 and a toothbrush to clean, followed by chain lube and a rag to finish. Then, whilst covered in even more muck, what’s a little bit more, eh? So I thought I’d give the rusting exhaust a coat of black stove enamel. This is a tip from @Dutchy, thanks mate. Looks much better than rusty brown! Here’s a “before”… Compare the coated tube to the uncoated one behind. Big difference. Im a little disappointed the black heatproof paint didn’t last even one year. After sandblasting, coating and oven baking I was hoping it would perform better. Anyway, the bike is almost ready for next season. Just needs a bath and an ACF50 rubdown. Roll on 2026!

Shiny only proves they're, well, shiny. The bike does not look lowered to me. Here is my stock suspension 95 before I started modding it. What the preload/sag is set at, how heavy the rider is, and the resulting laden geometry /ride height is also unknown.

Sounds like you might indeed have a lower setup — that shiny linkage is a good clue. I don’t have exact ride-height numbers, but measuring from the floor to the top of the rear subframe or swingarm pivot and comparing it to stock specs should tell you if it’s been lowered. If you get those measurements and share them, folks here can help you confirm before you order the Thurn riser links.

V4 is heavy & complex=expensive. IL4 is lighter, less complex=cheaper. iL2 is cheaper again with same complexity. Now they have applied the engineering to twins & singles that was applied to multi's years ago, they make good power, have great torque & cost less to make. V4 in motogp is more about power delivery & aerodynamics than anything else. Over 100mph, the drag saving from a thinner bike is worth more than HP due to diminishing returns from HP as speed increases drag becomes the challenge. Road bikes don't regularly travel faster than 100mph, so iL4 or Twin has more than enough power to get you there & drag is irrelevant. The VFR's made sense when power is equal & everything else is optimised the V4 should be faster than an iL4 !

Beyond all-day comfort. I've done a bunch of stupid endurance riding with standard/ADV ergo. Like having my VFR in Pacific and East Coast time zones in under 48 hours kind of stupid. After so many hours I'll need to start stretching my legs (why I prefer a cruiser now for this kind of dumb riding), but back and upper body with standard ergo no problems.

All adventure bikes are equal. But some are more equal than others. -Animal Farm, George Orwell