All Activity

The entire 2025 NFL program produced upon Wednesday night time, and with it, we inevitably received a glimpse at the Refreshing Orleans Saints agenda. They comprise just one of the best schedules inside the league, nevertheless within just my impression, their highway program is considerably more challenging than their dwelling their 8 dwelling rivals, I feel there a lovely crystal clear 2 most difficult game titles: Tampa Bay Buccaneers and San Francisco 49ers. The Bucs are preserving NFC South champions and experienced what I consideration was a charming sturdy draft. Upon the other hand, San Fran incorporates a genuinely impressive roster nevertheless were being disappointing final year owing towards some injury and other considerations. Following talking with some of the other writers and weighing the functions, I made the decision toward present Tampa the nod for the most difficult house sport this period. I believe theye the much better offense and their protection really should be Incredibly equivalent toward the a person that completed 17th within just details for every activity authorized very last , the Bucs are nevertheless led as a result of Baker Mayfield, who includes extensively revitalized his job inside Tampa and includes turn out to be 1 of the least difficult quarterbacks inside the NFC. The Saints received in direction of watch that firsthand remaining calendar year. Inside 2 game titles towards the Saints, Mayfield threw for 546 yards and 6 touchdowns, nevertheless he did toss 4 alternatives. The Bucs had been continue to equipped in the direction of rating 78 all round information in just these 2 game titles despite the fact that, as a result the choices didn incredibly Chris Godwin necessary back again following a time-finishing hurt past yr, the Bucs should really comprise 1 of the perfect recipient rooms inside of the league. Mike Evans Rico Payton Jersey, Chris Godwin and Emeka Egbuka is a unpleasant trio, and if yourself continue to keep shifting further into that space, they nevertheless contain adult men which includes Jalen McMillan and Sterling Sheppard, who can be successful. At functioning back again, they drafted Bucky Irving towards aid compliment Rachaad White, however he finished up having earlier mentioned as RB1 for the Bucs. He rushed for in excess of 1 Landon Young Jersey, 100 yards and 8 touchdowns, and that following just starting to be 10+ carries inside 2 of his initial 9 video games. Upon the defensive aspect of the ball, the Bucs consist of just one of the most significant strains in just all of soccer. Vita Vea anchors at nose cope with despite the fact that Calijah Kancey, Logan Corridor and Yaya Diaby perform more than him. Your self moreover consist of in the direction of try the truth of the matter that 464-pound Demond Watson was signed soon after the draft and may well close up creating the roster as backend of their security is wherever aspects order suspect. They contain Jamel Dean, nonetheless at the rear of him, variables choose Very slim. They saved Tykee Smith and Zyon McCollum, nonetheless they gave up 458 and 793 yards respectively final period. They did pay their minute and 3rd spherical choices upon Benjamin Morrison and Jacob Paris, 2 corners, whilst thus wel watch if they occur into engage in this period.I not much too concerned of the Bucs safety, nonetheless I believe their offense is transferring in the direction of present the Saints some difficulty once again this yr. If Mayfield includes a related year toward 2024, their offense really should be even far better than the 1 that averaged 39 specifics for each sport towards the Saints ultimate yr.I feel San Fran may perhaps Deliver this sport a function for its economical inside phrases of longevity, yet I feel Tampa is a 10-11 earn staff members this yr, and I not of course how constructive the 49ers will be soon after a down 12 months inside 2024 and a lackluster offseason.

kool deal there. please invite noraly over to see things, and try to get her drunk. 😍

improvise

Seen several times on this forum... Set the engine solid on a base jack or otherwise. Disassemble/strip the bike enough to lift the frame off the bike, leaving the engine sitting on the jack/base. -- Yes, it is a big job... That's the way I would do it anyhoo...beats trying to move the engine....

Throwing this up there for the halibut, may or may not be useful. We use this stuff all over the manufacturing plants. I have thought about building a trailer with it. Strong as all get out. ....No welding required... https://parco-inc.com/tslot-aluminum-extrusions/ ---------- Curious, your option, what does a 275 year old Netherlands house look like? Photo?

Thanks! And good points about not crushing the heck out of it. To harbor freight we go!

Thanks guys for the tip, gonna go check mine.

There are many ways. I like to use a drift that is smaller than the slot. And I don't smash all the way down, but leave a small gap so I can easily get a small chisel in to release it later if I need to do some work.

Anybody have a tried & true method of staking a brand new axle nut? I'm sitting here just scuffing up the new one with my hammer and pry bar 😆

Wisely chosen, I should think. I wish them a nice trip in good weather.

If I tried to dig a basement in South Holland, I'd have a swimming pool! Yes, the reason for the cantilevered shelves is mainly to avoid interference with the workbenches and machine tools underneath. I could, of course, run at least some front verticals, but I've seen other workshops where they're using pallet racks for both storage and workbenches, and the extra vertical supports always seem to be "in the way". I'm trying to avoid that. I'm also trying to avoid supporting anything from the ceiling (which is also the bottom floor of our house). They built these houses very sturdily, but I don't want to chance doing anything which could compromise the structure of the house itself. I will try to post my progress here. I don't actually have the keys, yet, but that day is almost here! Then I've got to move fairly quickly to avoid having everything in the UK delivered to the same space in which I'm trying to build all this stuff... Ciao, JZH

https://www.visordown.com/news/longest-day-challenge-raises-more-ps120000-cancer-research-uk

If you can arrange a little help, it can be done with a normal car jack. I have done it by myself with one. Would have preferred not to, but I have.

i probably could or i could arrange a few pairs of hands to put the new one in.

Can you rent an engine lift in Shetland? That would make it so much easier

am i right on thinking the engine would come out under the bike or would it come out the side? might need to ask the youtube mechanics lol

It’s really just a matter of unplugging the electrical connections, exhaust off and then the engine mounting bolts, take lots of photos of where the connections are Either a trolley jack or a scissor jack under the motor

yea i would need to see how much they want to charge to sent it to shetland. but ill need to wait until the bank is a bit healthier, but there seems to be plenty of engines to choose from. would someone with basic skills and basic tools be able to do the job? never done an engine swap before haha

The one I sent you a link to earlier has the throttle bodies etc on

Looks great! 👍 The thing I miss most about my VFR is the factory hard bags. I don't do a lot of trips, but those bags were a godsend for sport touring. I have struggled with what luggage to buy for my current bike, as I don't love any of the options. I'm close to making a decision now, but it has taken me a long time to get to this point. Kudos to you for making your own setup for your 5th gen. since there wasn't anything you liked on the market. 🙂

i did start it yesterday for the first time in a couple of month, has a rough idle when the engine is above 50C, and has a bit of a tapping sound, not sure if its just a sticky tappet or something. i think im just going to do an engine swap when there is a little more money in the bank, would be good to find a fully complete engine with injectors as they are a crazy price from honda

Last resort Radweld?

If you have an OEM hugger I will buy that off you. It's start, LOL

But you're not in Europe, so having this problem is practically unheard of. And I actually think the issue was restricted to bikes sold in UK.