All Activity

Awesome information. Thank You.

Hi all. Merry Christmas. I have a weird issue for you all. I have a really strange noise/feel issue and was hoping someone may be able to help. I've checked everything within my (limited) scope. Wheels/shocks/linkages/bearings all seem fine. Everything works as it should. But. On tiny road imperfections, I get a sort of 'click' through the frame/pegs/bars. Like metal on metal. Not anything that moves the bike, but a definite feel. It doesn't appear on proper potholes or any serious suspension use. Just the smallest road imperfections. It's unsettling me a bit because my grandkids are forever on the back. Any ideas?

Hi Somatyk, Thank you for your donation of 20.00 USD. We look forward to improving the forums with your donation. Thanks VFRDiscussion

From the wiring diagram, there is nothing magical about the shift switches on the left bar, so that should be easy enough to replicate on the right in some form.

Although I can use a clutch it is not very easy so the safer option for me is the DCT as it removes the need for the clutch.

Hi Grant. Have you discounted purchasing a non-DCT model?

Members 1 Location:Exeter, Devon In My Garage::VFR1200F DCT Hi Everyone As a new joiner to this forum, and potential owner of VFR1200 DCT, I am hoping someone can give some advise on how to make the bike work for my situation. Unfortunately I cannot operate the shift switches on the left handlebar, and prefer manual shifting over full automatic mode, so it seems I have a couple of options:- 1. Find and fit a foot shifter kit, which I am told Honda no longer supply, so if anyone knows of a kit I would love to hear about it. 2. Find a way of adding shift switches on the right handlebar. Race toggle switches are easy to find but I am not sure about extending/moving the shift wires from left to right handlebar. So any advise or pointers anyone can share will be very much appreciated. Thanks Grant

Hi Everyone As a new joiner to this forum, and potential owner of VFR1200 DCT, I am hoping someone can give some advise on hot to make the bike work for my situation. Unfortunately I cannot operate the shift switches on the left handlebar, and prefer manual shifting over full automatic mode, so it seems I have a couple of options:- 1. Find and fit a foot shifter kit, which I am told Honda no longer supply, so if anyone knows of a kit I would love to hear about it. 2. Find a way of adding shift switches on the right handlebar. Race toggle switches are easy to find but I am not sure about extending/moving the shift wires from left to right handlebar. So any advise or pointers anyone can share will be very much appreciated. Thanks Grant

That's excellent intel... it had to get in there somehow! May as well come out the entrance!

Usually I just brush off these riding photos from you southern hemisphere guys this time of year, since I ride year round. But our weather here the last few weeks has struggled to get out of the 40's F, and cloud cover is constant, the tarmac is greasy, so I will officially state that I'm jealous. Great pic.

I wonder if 1200X throttle cables would work for a "police" install on a 1200F. Drawings for switchgear for both looks very similar but different part numbers.

Might have allowed them to use available control housings instead of developing a svelte, good looking handle bar potentiometer at the time. It was 15+ years ago.

Thanks. That's very interesting. I might look into it.

That is odd.. maybe they already had a pattern part made for throttle cables before going by-wire and decided to run with it. Well, that means this type of job sounds like it would be more like 5th Gen install after all. Longer throttle cables, hoses and switch gear wiring extended out. I did have to run a horn extension cable of my own but that was super easy and hardly an inconvenience. I'm assuming the 1200 doesn't have switchgear slack like 5th and 6th gens do. (There are police kits for some 6th gens) Switch gear extension could be done with eBay parts? That's probably how I'd do it. Buy a toast set just for the wiring. Clip off wiring near controls end of eBay part (leaving plug), and clip off plug end on the bike then splice same colored wires of eBay loom to bike wiring.

I'm just showing off a lovely beach that is a pleasant ride away, Langs Beach just south of Whangarei. And my '09 of course.

Bizarrely, the VFR1200F ride-by-wire system uses full-length throttle cables that attach to a very standard cable drum on the side of the throttle bodies, very similar to earlier VFR800s. The drum then drives a potentiometer which the ECM reads and uses to direct the stepper motors on the TBs. I looked at a current Triumph Scrambler 400 recently and the RBW has the potentiometer mounted as part of the throttle/right switch pod, so no cables at all, which makes a lot more sense to me.

Another option if you're trying to get standard upright, cobble together your own "Police" version handlebar kit. Or you could think of it like VFR1200X posture for your 1200F. Hurricane makes a kit for the VFR1200F that adapts a standard 7/8" handlebar instead of clipons. Still using original hoses and wiring like Helibars. https://japan.webike.net/products/9742669.html Same but in black. https://japan.webike.net/products/9742668.html I think this specific bar is a little lower than the Helibar rise, but that's not the idea. Having that clamp means you can now mount up a 7/8" in bar of your own choosing. Police kit 5th gen install entails longer hoses and throttle cables. I believe 1200 is throttle-by-wire. So that would be extended wiring. 5th gen came with tons of hidden slack requires no extensions to switch gear, I don't know if they did same for 1200. So you'd be looking at hydraulics extension, and wiring extend. Biggest issue might be windshield bodywork impedance. 5th gen install requires small windshield corner chop but no painted parts are harmed. This would be entirely dependent on handlebar of your choosing. As Skids mentioned, Helibars are a bit of relief, but still hunching. I rode with Helibars for years on 5th gens, but VFR800P-like standard posture is bananas.🤩

Lapis Blue '96 VFR750 gen 4 I just sold recently and 2003 VFR800 Vtec I have now. I just Love living in Scotland.

Sorry Skids, The photos showed exactly what I wanted. Thanks very much. I love this forum. Should've joined when I got the bike and found a pair of Helibars for £60. At the time, there were not photos or videos like what you posted here. Thanks again!

Hi drHoo You quoted my last post above but there's no comment from you. Were the photos what you wanted? It is usual to type something when you quote another post.

Great, thanks for the advice and sharing your experience.

My faithful VFR, owned since October 2014, 84328 miles when this pic was taken last month.

Is this more what yr wanting? Neither my gloves nor the controls touch the tank fairing, though it's damned close, and the mirrors are very clear. HTH

I rode with Helibars on my 2010 VFR1200F for six years and they were perfect for me--as they were on my 6th gen. In addition to the great advice from others here, I would add what you may know if you've installed higher bars before: Don't judge them on your first ride. Give it time. At first it seems so radically different that you'd swear they are six inches higher. A few more rides and you will be able to evaluate accurately. That has been my experience anyway.