Leaderboard
Popular Content
Showing content with the highest reputation on 08/01/2020 in Posts
-
1 point
-
1 point
-
1 point
-
Hey everyone. Pretty new to the group. Recently picked up a 2014. This will be my third VFR and since April I've put almost 5000km on her. Love the way she rides and sings for me [emoji16]. List of mods is pretty small as of right now, bit looking to change it the chain and sprocket for faster acceleration. What's everyone running in their 8gen? I've also gutted the exhaust, not sure if I'm sticking with it, or changing it up. Big plans for lots of mods. Hahaha Sent from my SM-N975W using Tapatalk1 point
-
Dropped the bloody thing wheeling it back into the garage, caught the back of my shirt on the handlebar of my mountain bike and it pulled me off balance. Fortunately it went towards me not away and I managed to stop it but still managed somehow to snap off the mirror stem. Managed to get a used replacement on ebay but couldn't get to the electric connectors without taking all the side plastics off, what a pain! All sorted now.1 point
-
1 point
-
Hi Everyone Not today, but last Saturday I had a blast with our beloved VFR at Estoril Circuit 😃 Below link for the videos if you would like to "take a ride with me" 😈 Can't wait to go back with the new headers, and win a bit more time on the straights 😃1 point
-
Well last days we had on the menu 😅 -new oil and filter and K&N air filter maintenance -removed CBS -assembled new Hel braided brake lines as well as stock VFR brake calipers drilled so to have all three pistons working at the same time and now I will deliver her Monday at the mechanic, so to have the used CBR 600 f4 front M/C I have bought rebuilt, as well as brake lines bleed, as I don't mess with that 😅 I can't seem to bolt back the screw highlighted in green, it's like if the screw thread which I believed existed inside the swing arm has vanished... or how does the screw holds to the swing arm so to keep the chain guard in place... many thanks for your help1 point
-
1 point
-
I love my 14" Delkevic - makes the V4 sound glorious! Not too loud, especially when compared to the Arrow slip-ons installed on my Ducati S4R. I would not go shorter than the 14" version1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
Your welcome and will love it. And let me share my sky lift mod, a holder for the rear axle strap mount. Drill a 1-1/8" hope in the top cap. Also Abba sells a tray but a Harbor Freight magnetic tray works pretty good for a buck. If you don't have a 1-1/8" hole saw, you can send me your cap and I'll drill it.1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
Oh m8. Never tighten a new filter with these. Great for removal only. Weapon Of Mass Destruction!1 point
-
1 point
-
Picture worth 1000 words I got some oil on the filter before install so was slick as he when installing and couldn't get a good grip. I wiped the tire off as good as I could before heading home but had a good 20 miles of twistys to get home, be sure I was hesitant to toss it into a left turn. Taking it easy seemed to scrub the oil off. Was trying to beat the sun going down before I got past the tightest part so slowly increased left lean angle along the way. Was nervous as hell the whole time 🙂1 point
-
Fitted the new Atlas Throttle Lock this morning. Installation was easy, though I was doubting myself that it was on correctly. I thought it was sitting up too high, but it looks the same as the photos on the instructions. I ended up using the thinnest spacer, not a lot of room between the grip and the throttle housing. Comparing it to the Kaoko I find the Atlas much much easier to engage and disengage. I seemed to have to turn the Kaoko more than 360 deg to get it to engage. Also with gloves on I found I accidentally engaged it a couple of times in the twisties. Performance is the same,the speed wanders a little either way with both. The Kaoko is visually far better in my opinion.1 point
-
So took the VFR out for a ride on Saturday over Sonora and Ebbits passes in California whole trip was 280 miles mostly far from any town or city mostly fun and twisty. 69 miles to go on the way home happen to be in Sonoma Ca. the biggest city on my route and I smell oil and while at a stop see some white smoke. I pulled over to discover oil everywhere including the whole left 1/3 of my rear tire. After finding tool kit unable to do the simplest task take off enough fairing to have a good look around the oil filter where I suspect the problem is I make it to the auto parts store to get what is needed to find a fix the problem. Seems while installing the filter with a channel lock made for installing oil filters I compromised the filter and after 2000 miles of heat cycles the crease in the filter failed pissing oil. Glad I was in town and not 50 mile from even a gas station. Picture of the oil filter.1 point
-
1 point
-
1 point
-
1 point
-
Last couple of rides I have done I collected a lot of Nth Qld bugs so decided today was a good day to give her a bath. All cleaned and dried. Polish and wax with synthetic Xwax tomorrow morning. Like you Grum I need to give the front chain sprocket a good clean, do you remove the lower fairing when you do this or do you find there is enough room without removing it? Also where did you get the older generation VFR badge/sticker from? All the places I have found that have them want a ridiculous amount of postage, one place wanted €21🤯. I wouldn’t mind putting one on the Powerbronze screen I have just ordered (dark tint doesn’t come with a logo)1 point
-
After 74,000kms fitted its Third chain D.I.D 525VX124FB (cut it back to 110 links). Very reluctant to replace the front original sprocket even after 74,000k's it looked near perfect! Still replaced it as I had a new one on hand. Fitted a new JTF1332-16 to the front. The rear was fine so left the OEM on. Big clean up done behind the sprocket cover. Original Chain - 36,650K's Second Chain - 37,380k's (EK525ZVX3124). Photo newly fitted sprocket Top. Old OEM sprocket after 74,000k's Bottom.1 point
-
1 point
-
Those are DSG correct? The long bolt is the first one you put in, the engine won’t fall out .... put some grease on it first Then put the rear bolts in Then torque the bolts up The pad mounts bolt to the pear shaped bracket The pads screw to the alloy mounts Use an anti seize compound like Copper Slip on all the threads1 point
-
Tore into the bike yesterday. Checked valve clearance on back bank, No 1 cylinder intakes at service limit .006, but they were 16K miles ago so buttoned back up. When it gets above freezing temps I'll have a go at the front bank today. Still to go: Bleed Brake system and calipers in the Ultrasonic. I do this every year. Remove rear tire, inspect, clean, grease rear bearing, probably time with 82K on the clock. Check front wheel bearings (new last year). Remove, clean, grease side stand and center stand, both are pretty stiff. Drop shock and clean, inspect and grease bushings. Retire OEM mirrors for second time and install replacement Y2K mirror(s) (one broke a while back). I'm sure I'll find more to do. OK, dropped the shock and dog leg. Inspected, took apart and cleaned and greased all bushings. Cleaned shock and inspected. Has been riding fine, so reinstalled. Did check it against a 929 shock with less than 10K on shelf, and the dimensions match. May re spring it and give it a go down the line if needed. Finished valve check on front bank, ended up draining the coolant, will flush and replace with new. Also took the time to give the airbox a scrub and detail. Awaiting new air filter. Removed center stand and side stand, neither looked like they had ever been serviced. Scraped and cleaned crud off both and when dry took a brass wire wheel to both. Reinstalled with a coating of high pressure waterproof grease. Now I may actually be able to snap the bike up first go. Installed Y2K mirrors. Today is rear wheel day, there is no play side to side and a check with a dial indicator shows it runs pretty true, about .002 out in 360 degrees, so I'll check the grease. I gave the front sprocket area a perfunctory clean while doing the side stand, so if time allows I'll remove and clean it and the output shaft area and remove and clean chain.1 point
-
On my ‘00, installed a recently sourced factory screen. The original had developed multiple cracks in recent years. Additionally, installed a used low-mount Two Bros aluminum slip on. Up to now I’ve run the factory system all the while listing after a Staintune, GPR, etc. For $50 I couldn’t pass it up. Am I correct in thinking that I now have can options to use with the two bro’s midpipe as long as the prospective can’s I.D. plays nicely with the midpipe’s O.D, utilizes springs for attachment & the mounting bracket is addressed appropriately? I have to say that internet video audio doesn’t do justice! I haven’t yet heard in person the VFR with anything but the OEM system. Just wanted to say, it sounds wonderful!1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
Two bolts and stops need to be added to the front. They should come with bike. Instructions are in owners manual. Removing & Installing Body Components u Front Seat ❙ Removal 1. Remove the rear seat. 2 P. 64 2. Remove the mounting bolts and collars, and then pull the front seat back and up. ❙ Installation 1. Install the front seat by aligning the recess for the current seat height position (low or high) with the front stay. 2. Install the collars and mounting bolts. 3. Tighten the mounting bolts securely. 4. Make sure that the mount positions of the recess and the adjust plates are the same seat position. 2 P. 92 5. Install the rear seat. Make sure that the seat is locked securely in position to pull it up lightly. For the front seat height adjustment, see “Changing the Front Seat Height.” 2 P. 91 Front seat Recess (low position) Mounting bolts Front stay Collars Recess (high position)1 point
-
1 point
-
Got a bunch of things done all at once: New DID chain and Sunstar sprockets despite everything still being in spec, with the OEM chain and sprockets still looking good at 40,150 miles (!) (I only use Honda spray lube on the chain) New adjustable billet levers from Japan New NGK iridium plugs Coolant flush Brake and clutch fluid flush and replacement with Endless RF650 Endless PRO2 front pads New Honda OEM quickshifter (busted the peg on the first one) Honda synthetic oil and OEM filter Honda OEM air filter Then I went for a ride!1 point