DriverDave Posted January 3, 2015 Share Posted January 3, 2015 Cool, thanks for posting. Not sure if I like the black, with the carbon. Any chance you can post a full side view pic of the whole bike? Link to comment Share on other sites More sharing options...
Member Contributer windyrun Posted January 3, 2015 Member Contributer Share Posted January 3, 2015 Dan told me a few times the were waiting on mid-pipes.... wonder if they got mixed up? After going back and looking at their You Tube vid, I have the mid pipe for the saddle bags. They packaged the wrong one. ADD 08/21: I talked with Greg at 2Bros this morning. With the pics I provided, they determined the part # was correct for my exhaust canister. The number stamped into the mid pipe was correct, but was stamped onto the wrong one. (at least that's what I got out of the conversation). I hope to have the correct mid pipe on Friday as they were sending it out NDA. I guess I'll see if someone packed the correct the pipe this time around...and shipped NDA as promised. ADD: 2Bros sent the correct mid-pipe NDA. This is the correct one. Install took all of 10 minutes. The sounds is louder and much deeper than stock at idle and when 1st taking off. When cruising, it's not much louder than stock, which is exactly what I wanted. Sounds pretty darn good: Link to comment Share on other sites More sharing options...
Member Contributer Grum Posted January 14, 2015 Member Contributer Share Posted January 14, 2015 Jochem, that matt black DAM on the black bike just looks fantastic, best looking pipe I've seen on a black Viffer. Great choice, hope it sounds as good as it looks. Link to comment Share on other sites More sharing options...
Orkid101 Posted January 30, 2015 Share Posted January 30, 2015 It's finally come!! Link to comment Share on other sites More sharing options...
Seb94 Posted January 31, 2015 Share Posted January 31, 2015 Hi all, Exhaust pipr "Remus", what is the sound/noise level ? Pictures ? video ? Thanks Link to comment Share on other sites More sharing options...
CandyRedRC46 Posted January 31, 2015 Share Posted January 31, 2015 Where is the high mount??! Link to comment Share on other sites More sharing options...
Orkid101 Posted January 31, 2015 Share Posted January 31, 2015 It started to snow just as I finished fitting it so this is the only pic I have at the moment. The screw that holds the baffle in has a small weld on it but it didn't take a lot to break it and pry the baffle out. It's smaller/shorter than the Akropovic pipe, It's also deeper in sound and louder too. Haven't had chance to ride it yet as it's still snowing here. Link to comment Share on other sites More sharing options...
duccmann Posted January 31, 2015 Share Posted January 31, 2015 Looks great, would of liked it without the plaque. Got a sound bite? Link to comment Share on other sites More sharing options...
Member Contributer Rob916 Posted January 31, 2015 Member Contributer Share Posted January 31, 2015 Looks sweet !!! although i agree with duccmann, dont like the plaque .... Link to comment Share on other sites More sharing options...
Orkid101 Posted January 31, 2015 Share Posted January 31, 2015 The plaque is a sticker. It comes with a red and white one. I put the red one on because it looked very plain with out it but I haven't made my mind up if I'm gonna keep it on there yet. Will try and get a sound clip tomorrow. Link to comment Share on other sites More sharing options...
Member Contributer windyrun Posted January 31, 2015 Member Contributer Share Posted January 31, 2015 Here's a sound clip from remus' web site: Link to comment Share on other sites More sharing options...
WERA910 Posted February 1, 2015 Share Posted February 1, 2015 Anyone looking to throw out their stock 8th gen exhaust?? I'd love to see what it would look like on my fifth gen. Link to comment Share on other sites More sharing options...
NZCam Posted February 3, 2015 Share Posted February 3, 2015 Who's running the Two Brothers S1R? I'd love to get your thoughts on it before I fork out the sizeable shipping costs to bring one to Australia. Link to comment Share on other sites More sharing options...
fatshoutybloke Posted February 27, 2015 Share Posted February 27, 2015 It started to snow just as I finished fitting it so this is the only pic I have at the moment. The screw that holds the baffle in has a small weld on it but it didn't take a lot to break it and pry the baffle out. It's smaller/shorter than the Akropovic pipe, It's also deeper in sound and louder too. Haven't had chance to ride it yet as it's still snowing here. Nice! Is that the stainless or titanium? Link to comment Share on other sites More sharing options...
Provence Posted February 27, 2015 Share Posted February 27, 2015 You're all going to be very jealous of my new aftermarket pipe! Custom made. Link to comment Share on other sites More sharing options...
Member Contributer sedgett Posted February 28, 2015 Member Contributer Share Posted February 28, 2015 I've got the Two Bros S1R and it's been on for a couple of months. Other than having some difficulty in getting the correct connector pipe (I did not want the one made to work with the hard luggage and got the wrong pipe twice), I'm very happy with the quality and the sound. It is a little louder than the Remus pipes I had on my 6th-gen bike, but has a great sound. The low-rpm pops and burbles are quite pronounced, but not unpleasant. It is beautifully finished, as one might expect from Two Bros. And of course it adds an additional 50 hp once the engine is wound over 14,000 RPM... :-) If you're going to pay to ship it to Oz, I'd recommend ordering it with both connectors; this will allow you to use it with hard luggage at some point and give you the improved appearance of the non-luggage model. I'd at least get them to agree to ship you the one you want at their cost if they ship the wrong pipe; the muffler is identical. Link to comment Share on other sites More sharing options...
DriverDave Posted February 28, 2015 Share Posted February 28, 2015 Additional 50 hp?!! Is that a magic pipe? Link to comment Share on other sites More sharing options...
Orkid101 Posted March 1, 2015 Share Posted March 1, 2015 It started to snow just as I finished fitting it so this is the only pic I have at the moment. The screw that holds the baffle in has a small weld on it but it didn't take a lot to break it and pry the baffle out. It's smaller/shorter than the Akropovic pipe, It's also deeper in sound and louder too. Haven't had chance to ride it yet as it's still snowing here. Nice! Is that the stainless or titanium?Titanium.Am very pleased with it Link to comment Share on other sites More sharing options...
01ragtop Posted March 26, 2015 Share Posted March 26, 2015 I know some people have been asking for a high mount option. I can't decide if I like this or not. http://staintune.com.au/collections/new-products/products/honda-vfr-800-high-sports-muffler Link to comment Share on other sites More sharing options...
marriedman Posted March 27, 2015 Share Posted March 27, 2015 Jesus that is sexy! And being Staintune it will be high quality. I think it owuld be a little more stable if it were just a tad shorter though. Link to comment Share on other sites More sharing options...
duccmann Posted March 27, 2015 Share Posted March 27, 2015 I know some people have been asking for a high mount option. I can't decide if I like this or not. http://staintune.com.au/collections/new-products/products/honda-vfr-800-high-sports-muffler Hell ya.....that if beautiful. $800 bones, thats alot of scratchWindyrun, thats one hell of a sound bike.....sounds awesome Link to comment Share on other sites More sharing options...
Member Contributer digitallyhip Posted March 27, 2015 Member Contributer Share Posted March 27, 2015 I know some people have been asking for a high mount option. I can't decide if I like this or not. http://staintune.com.au/collections/new-products/products/honda-vfr-800-high-sports-muffler to I really like this! But I guess it'd be too good to be true to have this work with the luggage, right? Link to comment Share on other sites More sharing options...
CandyRedRC46 Posted March 27, 2015 Share Posted March 27, 2015 Bout time someone made a high mount for the eighth gen Link to comment Share on other sites More sharing options...
Member Contributer windyrun Posted March 27, 2015 Member Contributer Share Posted March 27, 2015 That wheel sure looks good with the high mount Link to comment Share on other sites More sharing options...
Shinigami Posted March 31, 2015 Share Posted March 31, 2015 Yes, but the can itself looks... not so good. Like something off an '80's Suzuki. Which would be fine... on an old Suzuki. On the '14/14 Interceptor, not so much. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.