Member Contributer goose Posted July 10, 2013 Member Contributer Share Posted July 10, 2013 There's an auction next month and this pic was in the listing. No other information was given, not even a mention of this specific bike. They say there will be more information added later this month, but I am REALLY curious... Now let me tell you, I've had several old GS Suzuki's in my garage at one time in various states of repair, if that gives you any idea of what my past years were like. Just kept finding nice old bikes for under a grand each that needed love and like a cute puppy dog, they kept following me home. I eventually got rid of the old suzuki's much to the relief of my poor wife. Then I found the VFR and I've been quite happy just riding (after I fixed her up, of course). Since then, I've restrained myself from taking on any new "projects." But darn it, this is a VF1000. What to do? It's a carburated bike, so I'm familiar with what all will need work there. But how's the parts market and how pricey are they? Your thoughts are greatly appreciated! Link to comment Share on other sites More sharing options...
Member Contributer Kel Posted July 10, 2013 Member Contributer Share Posted July 10, 2013 I don't mind old bikes or bikes that have sat for awhile, but old bikes that have sat outside awhile tend to scare me off. Judging by the sun damage on that seat, I'd guess this poor thing has been outside, uncovered for a long time. That means all sorts of potential problems. Carbs could be beyond what a cleaning can fix. Seals dry rotted and split. Gas tank rusted. Cylinders rusted to the rings. Water and God knows what inside the bottom end(crank bearings are no longer available), Wiring harness chewed. Radiators clogged/rusted. Gauges clouded over. Then there's the normal stuff that can go on these 1st gens...Cams could be toast. 2nd gear gone. Cam chain tensioners. You get the idea. When you add up all the UV destroyed pieces, rusted metal parts, lots of unavailable OEM stuff, new paint, and all the stuff you'd replace on a good used bike(fork seals, battery, tires, air filter, oil/coolant change, wheel bearings, R/R, chain/sprockets, etc,) is it worth it to you? I guess you're looking in the thousands. Probably quite a bit more than a really nice used one. That being said, it all boils down to how bad you want a tough project and how bad the motor is and how much you can get it for. Unfortunately, it would be pricey even if they gave it to you. Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted July 10, 2013 Member Contributer Share Posted July 10, 2013 Since I already have a few 1000s, I would be intersested, if only just for parts. But if this was my first dive into the big old V4 pool... nope. Pass. Unless, again, I bought this for parts at a really good price for my next (much) nicer one. Link to comment Share on other sites More sharing options...
Member Contributer CornerCarver Posted July 10, 2013 Member Contributer Share Posted July 10, 2013 If you can score for $225 or less, I might take a flyer on it if I were you. When you then discover only HALF of the issues that Kel brought up you can part it out for $$$ and start with the period correct aftermarket exhaust. For a builder to keep, pass. Link to comment Share on other sites More sharing options...
Member Contributer tomk1960 Posted July 10, 2013 Member Contributer Share Posted July 10, 2013 It costs nothing to look, so why not go to the auction and check it out? If you could get it for $100-$200 and it turns out to be too far gone, you'll get your money back and then some if you part it out. The only person who will bid high on a bike like that is a dreamer or someone who has absolutely no idea what's involved. An informed buyer will know that the restoration cost will far outweigh the purchase price and bid low. If the auctioneer sets a ridiculous minimum bid, just watch to see if someone bites. Bikes like these often move from the garage of one uninformed buyer to the next, until someone like you comes along and finally digs in. My CB750F was only registered by the original owner, then it passed through the hands of at least 3 more owners who were clueless about restoring bikes. Now I have it and it's almost done. Link to comment Share on other sites More sharing options...
Member Contributer goose Posted July 11, 2013 Author Member Contributer Share Posted July 11, 2013 Great opinions, appreciate it. There's a bunch of other bikes and parts in this auction, too. I'll post up the link here shortly. Definitely plan to head out there and check it all out, there's tons of stuff and its only about 45 minutes drive from my house. Link to comment Share on other sites More sharing options...
Member Contributer YoshiHNS Posted July 11, 2013 Member Contributer Share Posted July 11, 2013 I don't think I would buy it for even $250. That's saying something. Link to comment Share on other sites More sharing options...
Member Contributer thor294 Posted July 11, 2013 Member Contributer Share Posted July 11, 2013 If I got that bike, I would take it all apart and try to fix it, or part it out. I would literally check everything Link to comment Share on other sites More sharing options...
Member Contributer vfrcapn Posted July 13, 2013 Member Contributer Share Posted July 13, 2013 I'd pay $200, take off the plastics, especially the rear seat cowl, and exhaust, and leave the rest of the bike. Link to comment Share on other sites More sharing options...
Veefer800Canuck Posted July 13, 2013 Share Posted July 13, 2013 For a couple hundred bucks, it might make an OK parts bike, if you already had a VF1000 restoration under way. Link to comment Share on other sites More sharing options...
Member Contributer dalesvfr Posted July 13, 2013 Member Contributer Share Posted July 13, 2013 What if it ran? And it ran great? And the forks are straight and all the mechanical components are fine? Why not buy it cheap and do something interesting with it? Why does it need to be looked at as a full on restoration candidate? Link to comment Share on other sites More sharing options...
Member Contributer goose Posted July 15, 2013 Author Member Contributer Share Posted July 15, 2013 If it runs, well, that would change everything in my book... :-) Link to comment Share on other sites More sharing options...
timmythecop Posted July 15, 2013 Share Posted July 15, 2013 the solo seat is worth 200 bucks. the rest of the bike.....not so much. Link to comment Share on other sites More sharing options...
Guest Posted July 20, 2013 Share Posted July 20, 2013 Well, as you know how to work on bikes, go take a gander. You know how to do the basic checks, i.e. water in the oil, brake fluid, etc... If it looks just like it's been abused but still mechanically together, go for it. I'd probably go 3-500 hundred. True, if you had to send it out for work, that's one thing, but if you're doing the work yourself... Heck, stick it in a corner of your garage for the next 15 years and then sell it for a couple grand without turning a wrench. We're coming to the end of cheap interceptors. Yeah, you can still find a good deal on occasion, but it's changing quickly. Out here you just don't find a VF anything for 500 dollars unless its just a pile of parts without a title. These are the stories you tell in another decade along the lines of "yeah, I could have bought one for a few hundred dollars. Not really sure why I didn't." What are you going to buy for even $500 dollars? I know people that blow more then that at casinos every month. Or what about a laptop that's outdated in 5 years? Just food for thought. Link to comment Share on other sites More sharing options...
Member Contributer JamieDaugherty Posted July 21, 2013 Member Contributer Share Posted July 21, 2013 Let me know where to be and I'll buy it!!!! I'm looking for another VF1000 project right now, actually. Link to comment Share on other sites More sharing options...
Member Contributer JamieDaugherty Posted July 21, 2013 Member Contributer Share Posted July 21, 2013 Let me know where to be and I'll buy it!!!! I'm looking for another VF1000 project right now, actually. Link to comment Share on other sites More sharing options...
Member Contributer YoshiHNS Posted July 22, 2013 Member Contributer Share Posted July 22, 2013 If it has been stored outside for a while, move on. I keep finding more and more wrong with my cheap F2 that's purely from weather and rust than anything else. Only thing making it worth continuing is that it has a good lot of kit on it, the engine seems to work fine, and I'm a headstrong buffoon. Yes, I can fix everything, but to finish it up, it's going to be a good deal over a grand in parts. And that's parts that you can still find pretty easily new. Link to comment Share on other sites More sharing options...
Beck Posted July 22, 2013 Share Posted July 22, 2013 VF1000? Don't the have what the English called "Chocolate cams" though? If they did, a top end oiler kit might be a good thing to look for if this bike does not have one....... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.