Power Commander Maps
Fueling Maps for use with Powercomander Moduals
48 files
-
OFFICIAL COZY MAP - (cozye_ver5.djm) - Famous vtec pc3 USB map.
By cozye
Thanks a million to HS for setting up this downloads section. Well, here is my map for everyone to download. This is the same map that is featured in Motorcyclist Magazine (May,07 pg 159).
This map should work perfectly on any 2002-2005 VFR with aftermarket slip on and o2 eliminators. It will work well on any vtec really, regardless of exhaust. If running stock exhaust you may want to go in and lean it up just a touch. Try it first though and see before tweaking. If anyone feels like they can make some improvements, go for it. Many minds are greater than one.
I believe Tinyminds has dyno'd this map and got around 101 hp or so.
This map wont work well on 2006-2007 models with the lower vtec engagement. You could probably take the map and modify it accordingly for the lower vtec range. If someone attempts this, please post it up for other newer vtec guys to use. I've had quite a few 06-07 owners ask for it. My thoughts are that you could copy mine below 6000, and above 8000. Then just mimick what I did with the fuel curve on the dynojet supplied version from 6000-8000. Just smooth out the fuel curve.
enough rambling.
One request however. If you use the map, and you really like it. Why not make a small donation to VFRD ? I would guess there are probably 150 people who have or are using this map (just going by the fact that I have had about 300 request for it). If all those people chipped in 5 bucks, it would be quite a bit of dough to go for our wonderful community. Just a thought. :thumbsup:
1,272 downloads
Updated
-
Cozye's Map Modified for an 06+ VTEC
By Guest
I just modded Cozye's PC3 map and ran it on my '06, pretty impressive power gains with gas milage savings at highway speeds to boot. VTEC is pretty smooth too. I'm going to run it for a while to see how it does. If anyone else decides to run it let me know how it does for you.
681 downloads
Updated
-
Modified Cozy_ver5 for PCV
By tdmp
I took Cozy's ver_5 PCIII map (.djm) and copied it over to work on a PCV (.pvm). The only difference is the PCV has a 15% throttle were the PCIII does not. I just took an average between the 10% and 20% throttles for this column and it seems to work well. See Cozy ver_5 original description for more info.
I have an 02 VFR with BMC air-filter, O2 eliminators, PAIR mod and gutted stock exhaust (cat still in place). I have to say this map is excellent. Low rpm performance (under 3000) is much cleaner and throttle is more responsive. At partial throttle (under 50%), there is practically no VTEC transition. This map should work well for the 02 - 05 models but might be a little rich for stock exhaust.
The only area I see that could use a little improvement seems to be the VTEC transition at large throttle openings (more than 50%). The transition is noticeable but no where near as bad as stock.
tdmp
431 downloads
Updated
-
2002 - 2005 Honda VFR 800 VTec Downloads
all dydnojet maps availible for the PCIII VTEC
329 downloads
0 comments
Updated
-
1998-1999 VFR Power Commander Maps
All availible PCII maps from Dynojet for the 5th generation open loop fuel injection system NO O2 sensors
286 downloads
Updated
-
2006 - 2007 Honda VFR 800 VTec Downloads
All availible maps from Dynojet for the VTEC using the PCIII-USB
277 downloads
0 comments
Updated
-
2002-2005 PC3 Map: w/ Catless Headers, Staintunes, & K&N Filter
By tinyminds
This map was Dynotuned on a 2004 w/ 5th Gen Catless Headers, Staintune Slipon Exhaust, 02 Sensor Eliminators, K&N Air Filter, & PC3.
!!! MAP NOT TO BE USED W/ STOCK HEADERS !!! CATLESS HEADERS ONLY !!!
274 downloads
Updated
-
M16-005-004 - Dynojet Leo&Vince Map
By jay-d
This is the missing map from Dynojet's website for the PCV.
2006+
Leo & Vince aftermarket slip ons
Power Commander 5
Aftermarket or stock air filter
Dynojet 02 Eliminators
237 downloads
Updated
-
whitepine3 pcv 02-05 map
By Whitepine
pcv map for 02-05 with mapping by gear. Modified maps of Cozy's and coderighter
214 downloads
Updated
-
2000-2001 VFR Power Commander Maps
all availible maps from Dynojet for the PCIII version y2k 5th gen with closed loop injection (o2 sensors) this is a self exstracting zip file
200 downloads
Updated
-
Coderighter new, Rev 3 Map. Note some changes in bike setup.
By coderighter
It's been a while, sorry. I added a vacuum switch to disable Autotune during deceleration. The disabling during deceleration prevents the Autotune from trying to correct the mixture while the bike's EMU is trying to lean it for coast. The Autotune will try to "fix-it" wasting fuel and screwing up the trim map until the next time you hit the corresponding cells.
I have disconnected the Evap. since the last update.
Jon
175 downloads
0 comments
Updated
-
PC3 USB Staintune 1998-2001 5th gen European map
This is a direct transcription of the pc2 files posted at dynojet I combined the AAP tables and MP file tables from the original(map)file and converted it into a single (dmj) file table. The european staintune map is considerably leaner than the US version over the entire range of rpm and throttle postion.
I found it has good fuel economy and smooth power delivery for my 1998 vfr high mount staintune with silencer bud and K&N filter I used this map exclusivly when I had my old PC2. I get 40-42 mpg with this map riding 70-80 mph on the highways. I went back to this map after suffering 35mpg from the us version when I upgraded from the PC2 to a PC3 usb with no noticible difference in performance, I transcribed the old european pc2 map and made this file. The leaned out areas actually remove some flat spots from OEM fuel map hard coded in the ECM of the bike.
174 downloads
0 comments
Submitted
-
2006 VFR800_Mach 1 Custom PCIII USB
By NVR2L8
This is a Mach 1 dyno tuned fuel map for a 2006 VFR800. Mods are listed below.
2006 VFR800
Stock Headers
Two Brothers Dual V.A.L.E. Slip-On Mufflers
K&N air filter
Snorkle Removed
Dynojet O2 eliminator kit
PAIR System intact but disabled (connector disconnected)
Flapper Valve Enabled
171 downloads
0 comments
Updated
-
Coderighter 6.6.12
By coderighter
I have not changed anything on the bike that will effect the file since the last version, it's just a further refinement thru multiple trim acceptance and tweaking. There's been some confusion about version numbers, so from here forward, the version is the date posted on VFRD. Enjoy!
161 downloads
Submitted
-
black06vfr's map
By Guest
Here it is. A power commander map for a BMC race filter, O2 elims, and Migs exhaust.
151 downloads
Updated
-
Old Power Commander 2/3 Stuff
By MadScientist
This is a recovery of an old PCII directory from long ago when I had one on my VFR. I believe there is software in it to edit both the PCII and PCIII maps. I no longer have either of those to test it out, but the programs open map files and such. The biggest pain was finding a USB->COM port adapter for the laptop, alternatively I remember being able to remove the PCII from the bike and hook it up to a desktop with a com port with a 9V battery to power the PCII.
I didn't check, but I _think_ all the old PCII maps (excluding California) uploaded by Miguel are in this zip file.
Just putting this out there because someone was looking for it.
148 downloads
Submitted
-
Cozye's Map PCIII NON-USB
By Ryanme17
Here is a version of Cozye's map converted to run on a nonUSB PCIII.
Because Cozye's map has adjustments for every 250 RPM, and nonUSB PCIII only has ever 500 RPM, I made a few minor tweaks, usually only 1 % richer to try to get the same AFR between 500 RPM marks, but for the most part, it's just the same numbers copy-pasted over into the different format.
This is for the 2002-2005 models.
146 downloads
0 comments
Updated
-
5th Gen PCII & PCIII maps
By Knight
Some of these I pulled from the Power Commander site. For the files that are corrupt on that site I searched the net and found the missing files on some old plain .html personal blogs such as:
http://homepage.ntlworld.com/stu.tyrrell/PowerCommanderMaps.htm
Note that some of the PCII files have modified ignition.
Make sure and critically analyze any map before implementing it! I have nothing to do with these maps except that I searched for them and posted them here.
- Knight
145 downloads
0 comments
Updated
-
2006VFR800MotadScorpionK_N.DJM
By canib
File Name: 2006VFR800MotadScorpionK_N.DJM
Power Commander PCIII USB + “Accelerator Pump”
2006 VFR800
Scorpion Exhaust
O2 Eliminators
Motad Catless headers
K&N Air Filter
De-flapped,de-snorkled
All PAIR equipment intact
97HP Dyno’d in Las Vegas at ~2,000 above sea level, ambient air at 110 degrees F.
As Cozye said, “If you use the map, and you really like it; why not make a small donation to VFRD ?”
141 downloads
Updated
-
Modified Cozye PC3 USB Map (2004 VFR)
By CharlesW
Since I seemed to be able to improve some areas of the mapping for my particular bike, I thought I would upload the map and make a few comments.
1. I really don't know what I am doing
2. If I can do it, anyone can
3. I figured the only way I could actually damage the motor was by leaning things out and it seemed like the areas I wanted to work on needed more fuel, not less. I figured that would only hurt economy which it did, but only a small amount. Probably less than 5%.
4. Bike is a 2004, stock exhaust, K&N, PAIR valves and Flapper valve disabled. Snorkle in place.
141 downloads
0 comments
Submitted
-
'06 PCV Autotune generated map Rev 15
By coderighter
A little leaner just off idle in lower gears. More cells filled in. Please leave feedback.
Jon
139 downloads
Updated
-
PC111 usb 2002-2005 Vtec Australian / Euro. Modded Cozye map
By Guest
Map for 2002 Vtec Aust / Euro with Staintunes, o2 elim, K&N filter, Cat converter drilled (gutted)
Based on Cozye's map for PC111 usb, but tweaked for AU. on Dyno.
135 downloads
Updated
-
Dyno custom map for torque
By skot2003VFR
This map came loaded in my new to me 2003 VFR800. The guy who had the bike before the girl I bought the bike from had it dyno'd to his specs with a LeoVince and K&N air filter setup. This is pretty torqued for me (I am also new to sport/touring bikes). I loaded in the generic LeoVince map from the power commander site and that one is a little gentler to me, but I wanted to contribute something to the community. Let me know if you like it. I don't think this map is used for gas mileage.
131 downloads
Submitted
-
2002 vfr800 dyno tune map for power commander V
By mvvette97
This is a map that was set up on a dyno in Wisconsin. I leaned it out a little in the cruise area. It's set up for a catless header with the flapper air box mod and K&N air filter and using the O2 optimizers. I got this from the tuner I bought my power commander 5 from. Seems to run very smooth and pulls hard.
131 downloads
0 comments
Submitted
-
1998-1999 vfr 800 PC3 usb - staintune K&N or stock filter
After recently purchasing a PC3 usb unit after my trusty pc2 unit finally died (70k) miles I found that my old map file from the PC2 were no longer compatable. So I carefully collected the seperate tables on the PC2 and extrapolated the data into the PC3 usb software, averaging and smoothing the extra data points for the usb unit. conversion from .map file to .djm
127 downloads
0 comments
Submitted