CapitanBooster Posted August 20, 2014 Share Posted August 20, 2014 Hi, i am Pippo aka Capitan BoosterI come from Rome (Italy) and i am crazy for vfr (this is the fourth)But this time i want .... moreNow ... if you want, I'll tell youAt the beginning was....Working during the week end and finding items during the nigts.....Ehm ... this is for rvf 400This is for the kawa zx6rThis is for the VTR 1000 FAftermarket...From a Ducati ST2 ... Showa and Brembo serie oroSome trouble with the 400 plexyI like it...I did it!!!I see the light across the tunnelBetter for the tire size and the RC designSandy Spare Parts from england for the left exhaust exitMaybe...The engine is closed!!Clean is better..I am tired but a bit :-) Link to comment Share on other sites More sharing options...
Veefer800Canuck Posted March 12, 2015 Share Posted March 12, 2015 NICE! Link to comment Share on other sites More sharing options...
V4 Rosso Posted March 12, 2015 Share Posted March 12, 2015 I really like where this is going Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 13, 2015 Author Share Posted March 13, 2015 I've buy this rearset for R1 07/08 as you told me .... :-) Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 13, 2015 Author Share Posted March 13, 2015 Now i've some problems with the rear fairing. It doesn't fit to original tank (more wide than rc45 tank). I've cut it and now is unusable. Do you know a rear fairing for rc45 that fits on vfr750f tank? Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
The Phantom Posted March 13, 2015 Share Posted March 13, 2015 The bike looks terrific so far. From what I have seen over the years, all RC45 bodywork requires adaptation to the VFR frame/tank.One of our members Mr Matt may have some ideas for you? Link to comment Share on other sites More sharing options...
mrmatt Posted March 13, 2015 Share Posted March 13, 2015 Hey Captain, Great work, I've only been on VFRD sporadically in the past few years so I've missed your project. I think on my tail section the bodywork was actually a little wider than the tank, I think I bought mine from Airtech since it had 3 mounting points on each side instead of 2. Thurn Motorsport in Germany has one that is a blend of the 4th gen and RC45ish style I think I shaved away to the second line here, if I remember right it looked like it would fit My build has been in limbo for a while, hopefully you can get yours finished and tell me how to finish mine :) It looks like you are using the VFR subframe, is it chopped? Also, I noticed you found an upper fairing stay from a ZX6R, I hadn't thought of that but it is a hole in my build. Do you think you can hang the mirrors on it too? Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 13, 2015 Author Share Posted March 13, 2015 Hi Mr Matt nice to meet you, finally :-)... thanks for the info for the rear fairing and yes we have modified the original subframe but it is not finished yet. Maybe more high at the seat level. The front frame is the original (for the instruments) but i'll cut because near the windscreen. I've used a zx6r frame for the upper fairing.... and i hope hang it the mirrors (but with two little bar for the correct holes distance) Inviato dal mio GT-N7100 utilizzando Tapatalk Actually the problems are: fixing headlight to the front frame (saving the regolation), the exhaust muffler (carbon), fixing the seat on the fairing (maybe a neoprene seat). Today i've bought the mirrors, the windscreen, the blinkers and the rearset Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 13, 2015 Author Share Posted March 13, 2015 I don't like Thurn fairings, better Airtech... but now 226 usd are 226 euro :-( Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted March 14, 2015 Member Contributer Share Posted March 14, 2015 Could you use something like early CBR900RR headlights? Should be easier to find than RC45 headlights! Ciao, Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 14, 2015 Author Share Posted March 14, 2015 They are smaller... must be 35/35 Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
toe1959 Posted March 18, 2015 Share Posted March 18, 2015 keep up the good work, very nice project, been doing a replica using nc35 fairings and exhaust. Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 27, 2015 Author Share Posted March 27, 2015 Nice job!! I like it. Is it finished? Have you some rear subframe and front subframe pics? I've some trouble with mine "Ogni mattina una quadricilindrica si sveglia e si accorge che gli manca coppia.Ogni mattina una bicilindrica si sveglia e si accorge che gli manca potenza.Non importa che tu sia quadricilindrica o bicilindrica ....... comincia a correre" Link to comment Share on other sites More sharing options...
CapitanBooster Posted April 11, 2015 Author Share Posted April 11, 2015 I've changed the rear frame with the cbr929, better. Ready for the muffler Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
CapitanBooster Posted April 29, 2015 Author Share Posted April 29, 2015 Link to comment Share on other sites More sharing options...
CapitanBooster Posted June 5, 2015 Author Share Posted June 5, 2015 Link to comment Share on other sites More sharing options...
Member Contributer rhoderage Posted June 6, 2015 Member Contributer Share Posted June 6, 2015 Getting closer! Link to comment Share on other sites More sharing options...
keny Posted June 6, 2015 Share Posted June 6, 2015 For the headlights, Yamaha FZR600/1000 from the early models or 600(3aj)/660(1994-97)/750 Tenere looks like would fit in there. Or Kawasaki ZXR750 once? Link to comment Share on other sites More sharing options...
CapitanBooster Posted June 6, 2015 Author Share Posted June 6, 2015 ☺ I've yet the headlights... these are the back frame for the bulbs Link to comment Share on other sites More sharing options...
CapitanBooster Posted June 9, 2015 Author Share Posted June 9, 2015 Link to comment Share on other sites More sharing options...
Member Contributer luigi Posted July 21, 2015 Member Contributer Share Posted July 21, 2015 Ciao Capitano. Vedo che anche a te piace imbarcarti in imprese dove poco o nulla è semplice! Mi piace e, neanche a dirlo, sono certo che finirai prima tu la tua che io la mia. Dove stavi girando con il BMW? Valleunga? Probabilmente conoscerai già David Silver Spares, se no, ti dico che è un negozio on-line in Inghilterra. E' uno stockista Honda che compra fondi di magazzino in tutto il mondo e poi rivende roba nuova e originale a prezzi abbordabili rispetto all'Italia. Se ti manca qualcosa di particolare puoi provare lì. Se hai bisogno di qualche cosa chiedi pure, se posso ti aiuterò con piacere, non sono proprio ferrato con i 750, però... hai visto mai. Ciao, Luigi. Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted July 21, 2015 Member Contributer Share Posted July 21, 2015 Make mine a large one with extra mushrooms Link to comment Share on other sites More sharing options...
CapitanBooster Posted July 23, 2015 Author Share Posted July 23, 2015 Ciao Capitano. Vedo che anche a te piace imbarcarti in imprese dove poco o nulla è semplice! Mi piace e, neanche a dirlo, sono certo che finirai prima tu la tua che io la mia. Dove stavi girando con il BMW? Valleunga? Probabilmente conoscerai già David Silver Spares, se no, ti dico che è un negozio on-line in Inghilterra. E' uno stockista Honda che compra fondi di magazzino in tutto il mondo e poi rivende roba nuova e originale a prezzi abbordabili rispetto all'Italia. Se ti manca qualcosa di particolare puoi provare lì. Se hai bisogno di qualche cosa chiedi pure, se posso ti aiuterò con piacere, non sono proprio ferrato con i 750, però... hai visto mai. Ciao, Luigi. Luigi ... le nostre sono "Mission Impossible" :-) Si la BMW era Vallelunga ...... mi pare l'ingresso della esse Al momento dovrei avere tutti i pezzi, ma dovesse servire approfitterò della preziosa informazione Adesso la carena è in carrozzeria per verniciatura ed adesivi, a settembre cercheremo di finire (impiante elettrico spellato filo per filo perchè la strumentazione del VTR è completamente diversa) a presto Inviato dal mio SM-P905 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
CapitanBooster Posted October 19, 2015 Author Share Posted October 19, 2015 Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
CapitanBooster Posted October 29, 2015 Author Share Posted October 29, 2015 Inviato dal mio GT-N7100 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted October 29, 2015 Member Contributer Share Posted October 29, 2015 Something beautiful lurks underneath...... Link to comment Share on other sites More sharing options...
Question
CapitanBooster
Hi, i am Pippo aka Capitan Booster
I come from Rome (Italy) and i am crazy for vfr (this is the fourth)
But this time i want .... more
Now ... if you want, I'll tell you
At the beginning was....
Working during the week end and finding items during the nigts.....
Ehm ... this is for rvf 400
This is for the kawa zx6r
This is for the VTR 1000 F
Aftermarket...
From a Ducati ST2 ... Showa and Brembo serie oro
Some trouble with the 400 plexy
I like it...
I did it!!!
I see the light across the tunnel
Better for the tire size and the RC design
Sandy Spare Parts from england for the left exhaust exit
Maybe...
The engine is closed!!
Clean is better..
I am tired but a bit :-)
Link to comment
Share on other sites
128 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.