Jump to content

Power Commander Maps

Fueling Maps for use with Powercomander Moduals

48 files

  1. OFFICIAL COZY MAP - (cozye_ver5.djm) - Famous vtec pc3 USB map.

    Thanks a million to HS for setting up this downloads section. Well, here is my map for everyone to download. This is the same map that is featured in Motorcyclist Magazine (May,07 pg 159).
    This map should work perfectly on any 2002-2005 VFR with aftermarket slip on and o2 eliminators. It will work well on any vtec really, regardless of exhaust. If running stock exhaust you may want to go in and lean it up just a touch. Try it first though and see before tweaking. If anyone feels like they can make some improvements, go for it. Many minds are greater than one.
    I believe Tinyminds has dyno'd this map and got around 101 hp or so.
    This map wont work well on 2006-2007 models with the lower vtec engagement. You could probably take the map and modify it accordingly for the lower vtec range. If someone attempts this, please post it up for other newer vtec guys to use. I've had quite a few 06-07 owners ask for it. My thoughts are that you could copy mine below 6000, and above 8000. Then just mimick what I did with the fuel curve on the dynojet supplied version from 6000-8000. Just smooth out the fuel curve.
    enough rambling.
    One request however. If you use the map, and you really like it. Why not make a small donation to VFRD ? I would guess there are probably 150 people who have or are using this map (just going by the fact that I have had about 300 request for it). If all those people chipped in 5 bucks, it would be quite a bit of dough to go for our wonderful community. Just a thought. :thumbsup:

    1,272 downloads

    6 comments

    Updated

  2. Cozye's Map Modified for an 06+ VTEC

    I just modded Cozye's PC3 map and ran it on my '06, pretty impressive power gains with gas milage savings at highway speeds to boot. VTEC is pretty smooth too. I'm going to run it for a while to see how it does. If anyone else decides to run it let me know how it does for you.

    681 downloads

    10 comments

    Updated

  3. Modified Cozy_ver5 for PCV

    I took Cozy's ver_5 PCIII map (.djm) and copied it over to work on a PCV (.pvm). The only difference is the PCV has a 15% throttle were the PCIII does not. I just took an average between the 10% and 20% throttles for this column and it seems to work well. See Cozy ver_5 original description for more info.
    I have an 02 VFR with BMC air-filter, O2 eliminators, PAIR mod and gutted stock exhaust (cat still in place). I have to say this map is excellent. Low rpm performance (under 3000) is much cleaner and throttle is more responsive. At partial throttle (under 50%), there is practically no VTEC transition. This map should work well for the 02 - 05 models but might be a little rich for stock exhaust.
    The only area I see that could use a little improvement seems to be the VTEC transition at large throttle openings (more than 50%). The transition is noticeable but no where near as bad as stock.
    tdmp

    431 downloads

    4 comments

    Updated

  4. M16-005-004 - Dynojet Leo&Vince Map

    This is the missing map from Dynojet's website for the PCV.
    2006+
    Leo & Vince aftermarket slip ons
    Power Commander 5
    Aftermarket or stock air filter
    Dynojet 02 Eliminators

    237 downloads

    4 comments

    Updated

  5. 2002-2005 PC3 Map: w/ Catless Headers, Staintunes, & K&N Filter

    This map was Dynotuned on a 2004 w/ 5th Gen Catless Headers, Staintune Slipon Exhaust, 02 Sensor Eliminators, K&N Air Filter, & PC3.
    !!! MAP NOT TO BE USED W/ STOCK HEADERS !!! CATLESS HEADERS ONLY !!!

    274 downloads

    3 comments

    Updated

  6. Cozye's Map PCIII NON-USB

    Here is a version of Cozye's map converted to run on a nonUSB PCIII.
    Because Cozye's map has adjustments for every 250 RPM, and nonUSB PCIII only has ever 500 RPM, I made a few minor tweaks, usually only 1 % richer to try to get the same AFR between 500 RPM marks, but for the most part, it's just the same numbers copy-pasted over into the different format.
    This is for the 2002-2005 models.

    146 downloads

    0 comments

    Updated

  7. 2006VFR800MotadScorpionK_N.DJM

    File Name: 2006VFR800MotadScorpionK_N.DJM
    Power Commander PCIII USB + “Accelerator Pump”
    2006 VFR800
    Scorpion Exhaust
    O2 Eliminators
    Motad Catless headers
    K&N Air Filter
    De-flapped,de-snorkled
    All PAIR equipment intact
    97HP Dyno’d in Las Vegas at ~2,000 above sea level, ambient air at 110 degrees F.
    As Cozye said, “If you use the map, and you really like it; why not make a small donation to VFRD ?”

    141 downloads

    1 comment

    Updated

  8. Coderighter new, Rev 3 Map. Note some changes in bike setup.

    It's been a while, sorry. I added a vacuum switch to disable Autotune during deceleration. The disabling during deceleration prevents the Autotune from trying to correct the mixture while the bike's EMU is trying to lean it for coast. The Autotune will try to "fix-it" wasting fuel and screwing up the trim map until the next time you hit the corresponding cells.
    I have disconnected the Evap. since the last update.
    Jon

    175 downloads

    0 comments

    Updated

  9. 2006 VFR800_Mach 1 Custom PCIII USB

    This is a Mach 1 dyno tuned fuel map for a 2006 VFR800. Mods are listed below.
    2006 VFR800
    Stock Headers
    Two Brothers Dual V.A.L.E. Slip-On Mufflers
    K&N air filter
    Snorkle Removed
    Dynojet O2 eliminator kit
    PAIR System intact but disabled (connector disconnected)
    Flapper Valve Enabled

    171 downloads

    0 comments

    Updated

  10. '06 PCV Autotune generated map Rev 15

    A little leaner just off idle in lower gears. More cells filled in. Please leave feedback.
    Jon

    139 downloads

    1 comment

    Updated

  11. 1998-1999 VFR Power Commander Maps

    All availible PCII maps from Dynojet for the 5th generation open loop fuel injection system NO O2 sensors

    286 downloads

    2 comments

    Updated

  12. 2002 - 2005 Honda VFR 800 VTec Downloads

    all dydnojet maps availible for the PCIII VTEC

    329 downloads

    0 comments

    Updated

  13. 2006 - 2007 Honda VFR 800 VTec Downloads

    All availible maps from Dynojet for the VTEC using the PCIII-USB

    277 downloads

    0 comments

    Updated

  14. Graphic comparison of Coderighter's map vs Dynojet PCV stock map

    As my first contribution to this outstanding forum I put together an excel based analysis, or rather cross-comparison, of the Dynojet PCV stock map for 2006 VFR800 ABS and Coderighter's map generated by Auto Tune (if I understood correctly). The motive for such an endeavor was the fact that I am a lucky owner of black 2006 VFR800 ABS anxiously expecting his PCV to come in mail in about a week's time, on top of that I am a finance guy - hence excel spreadsheets with funny graphs.
    On the topic, I laid out Coderighter's maps for every gear in one tab (along with graphs of values for every gear) and Dyno stock in another tab (six copies since Dyno uses single map for all gears), the third tab contains the tables of differences between the two maps.
    My personal observation sort of supports real life experience of folks that used Coderighter's maps with much success, especially in respect of two aspects: 1)lower overall fuel consumption (Coderighter has somewhat leaner maps, or so it seems from comparison tables), 2) smoother Vtec over the whole RPM range without sharp surges at 6500 RPM. I am yet to try the map for real but you can bet that I will. Love the results on graph. Someone mentioned surges at 3000RPM, that sort of shows through on the graphs, slightly richer values, that could have differing implications for every bike, so not sure how that translates into a surge.
    Many thanks to Coderighter, I follow your threads with much dedication, and Cozye for his early inputs that live on.
    PS: To view the file change the extension from *.doc to *.xls, I couldn't upload the file in its original form nor as a zip archive (got unsupported standard message).

    120 downloads

    0 comments

    Updated

  15. whitepine3 pcv 02-05 map

    pcv map for 02-05 with mapping by gear. Modified maps of Cozy's and coderighter

    214 downloads

    1 comment

    Updated

  16. 2000-2001 VFR Power Commander Maps

    all availible maps from Dynojet for the PCIII version y2k 5th gen with closed loop injection (o2 sensors) this is a self exstracting zip file

    200 downloads

    3 comments

    Updated

  17. Pres day map for Power Commander 5

    This is a 6 speed map. This map has been evolving over the last few weeks. Speed Calibration was done via GPS and gear speeds were set @ 5k rpm.
    Temps range from 50* to 70* but mostly in the mid 60's. Evevation was from Sea level to 4000 feet. Average around 1500 ft.
    The trims are now at a max +/-1~3.
    In mixed riding the MPG are @ 41. Tearing it up in the hill will get as bad as 36 mpg. Straight freeway speeds can get 43 mpg.
    Most of the map is running 13.2 afr, But at 0~20% throttle in the 4250~6250 RPM range in 5&6 gears the AFR is 13.7.(I tried leaner, but the bike got back the mid range buzz, so 13.7 it is).
    Y2K with gutted airbox, PiperCross filter, Staintune and no o2/Pair.
    Enjoy.

    121 downloads

    0 comments

    Updated

  18. VFRBENNYSMAPPC3

    This is VFRBennys PC5 map for 5g vfr copied and pasted to pc3.
    His description:
    ..the air box has been hacked up pretty good. Using a PiperCross filter, Staintune hi mount, Pair's disabled and o2 sensors disabled

    97 downloads

    0 comments

    Updated

  19. PC5 on a 5th gen VFR

    Hi all, here's a map for the PC5 on a 5th gen VFR. As you can see from the pic, the air box has been hacked up pretty good. Using a PiperCross filter, Staintune hi mount, Pair's disabled and o2 sensors disabled. Runs like a batt out of Hell.
    Enjoy.

    94 downloads

    1 comment

    Updated

  20. Modified Cozye PC3 USB Map (2004 VFR)

    Since I seemed to be able to improve some areas of the mapping for my particular bike, I thought I would upload the map and make a few comments.
    1. I really don't know what I am doing
    2. If I can do it, anyone can
    3. I figured the only way I could actually damage the motor was by leaning things out and it seemed like the areas I wanted to work on needed more fuel, not less. I figured that would only hurt economy which it did, but only a small amount. Probably less than 5%.
    4. Bike is a 2004, stock exhaust, K&N, PAIR valves and Flapper valve disabled. Snorkle in place.

    141 downloads

    0 comments

    Submitted

  21. black06vfr's map

    Here it is. A power commander map for a BMC race filter, O2 elims, and Migs exhaust.

    151 downloads

    2 comments

    Updated

  22. Coderighter 6.6.12

    I have not changed anything on the bike that will effect the file since the last version, it's just a further refinement thru multiple trim acceptance and tweaking. There's been some confusion about version numbers, so from here forward, the version is the date posted on VFRD. Enjoy!

    161 downloads

    2 comments

    Submitted

  23. Old Power Commander 2/3 Stuff

    This is a recovery of an old PCII directory from long ago when I had one on my VFR. I believe there is software in it to edit both the PCII and PCIII maps. I no longer have either of those to test it out, but the programs open map files and such. The biggest pain was finding a USB->COM port adapter for the laptop, alternatively I remember being able to remove the PCII from the bike and hook it up to a desktop with a com port with a 9V battery to power the PCII.
    I didn't check, but I _think_ all the old PCII maps (excluding California) uploaded by Miguel are in this zip file.
    Just putting this out there because someone was looking for it.

    148 downloads

    1 comment

    Submitted

  24. pc3 usb map

    mods:
    motad headers
    2 bros exhaust
    bmc filter
    no flapper or snorkel, pair valves
    modified velocity stacks

    81 downloads

    4 comments

    Submitted

  25. Cozeys map PC3 non usb

    Cozeys map for non usb model power commander 3. Every other line taken out to work with rpm change every 500 rpms instead of every 250 rpms as with PC3 usb model. For some reason it would not let me use the .map file extension so I just picked another one that it would let me load. I think you can just change it manually from .mov to .map and it should work fine.

    65 downloads

    0 comments

    Updated


×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.