Jump to content

Power Commander Maps

Fueling Maps for use with Powercomander Moduals

47 files

  1. '06 PCV Autotune generated map

    My bike is an '06 with Remus Carbon fibers, BMC filter, and PAIR plugged. I started with the Dynojet Staintune map because it was the richest (safest) of the none stock pipe maps. It has since been Autotuned with the trims accepted 10 times. At this point most of the common cells have been "autotuned". The rest are still at the Staintune setting. I will try to reload this download every month or so, as I ride and more cells get set.
    Even if you don't have a PCV but have a PCIII, you could download PCV software at Dynojet.com (free) and open the file and look at the setting. This might help you make informed choices on map setting in your PCIII.

    97 downloads

    0 comments

    Updated

  2. '06 PCV Autotune generated map Rev 15

    A little leaner just off idle in lower gears. More cells filled in. Please leave feedback.
    Jon

    136 downloads

    1 comment

    Updated

  3. 05 PCV individual cylinder Dyno Tune

    Hey guys,

    after installing my new complete exhaust system i set the big girl off for a tune.
    asked for the guy to tune each cylinder individually.

    came back with this..

    runs really nice. only thing i might change would be first thing in the morning some times the big will stall when you come off the throttle.

    let me know if someone knows how to fix this.

    thanks. hope someone enjoys this..

    108 downloads

    1 comment

    Updated

  4. 09vfr800a.zip

    A zip file containing some log files generated by a DynoJet LCD-200. Files include data on AFR, TPS, duty cycle, rpm, engine temp (straight voltage from sensor) and MAP (voltage from sensor). All files can be opened in a spreadsheet to generate graphs, etc.
    Just for general interest.
    Bike is an '09 VFR800A with stock airbox, stock exhaust and the PAIR is blocked.

    50 downloads

    0 comments

    Submitted

  5. 16-005-508/018 blend

    This is my first post, but I have been reading the forum for years. I just got a PCV during the pandemic to kill some time and ran into a dead end in terms of maps for my bike:
    1999 VFR800 with Vance & Hines SSR slip-on, airbox top lid removed (no flapper, snorkel, etc) with pipercross high flow filter in place. Before installing the PCV it was sounding and feeling like a 250 parallel twin until I fattened up the "1998-1999 Erion slip-on" map from Dynojet, by adding the difference in fueling points between the 16-005-503 vs 16-005-508 maps between 2% - 20% WOT until 6000 RPM to accommodate the "airbox valve disabled" as its listed in the Dynojet notes. Although, Dynojet support advised against using the European maps at first, I was able to make it work by subtracting -6 points (~2 jet sizes) from the fueling numbers on 16-005-508 across the table from 2-20% and from 750 - 6000 RPM (assuming my ECU is enabling the 2nd intake track at 5500 rpm and disabling it at 5000 rpm, per the service manual) I test drove it today and it does make a big difference. Again this map is a hybrid mix of the Euro '02 airbox valve disabled map and the '98 erion slip-on map 16-005-018. I have tried out all the other maps listed here on this forum and this one works best for my bike. Cheers!

    27 downloads

    0 comments

    Submitted

  6. 1998-1999 vfr 800 PC3 usb - staintune K&N or stock filter

    After recently purchasing a PC3 usb unit after my trusty pc2 unit finally died (70k) miles I found that my old map file from the PC2 were no longer compatable. So I carefully collected the seperate tables on the PC2 and extrapolated the data into the PC3 usb software, averaging and smoothing the extra data points for the usb unit. conversion from .map file to .djm

    113 downloads

    0 comments

    Submitted

  7. 1998-1999 VFR Power Commander Maps

    All availible PCII maps from Dynojet for the 5th generation open loop fuel injection system NO O2 sensors

    274 downloads

    2 comments

    Updated

  8. 1998-1999 VFR Power Commander Maps California

    All availible pcII maps from Dynojet for the California Model 5th gen bike open loop fuel injection system NO O2 sensors

    73 downloads

    0 comments

    Updated

  9. 2000-2001 VFR Power Commander Maps

    all availible maps from Dynojet for the PCIII version y2k 5th gen with closed loop injection (o2 sensors) this is a self exstracting zip file

    171 downloads

    2 comments

    Updated

  10. 2002 - 2005 Honda VFR 800 VTec Downloads

    all dydnojet maps availible for the PCIII VTEC

    326 downloads

    0 comments

    Updated

  11. 2002 VFR with 2006 injectors, custom PCV map

    This is a custom map for a 2002 6th-gen with the following mods:

    2006 model injectors
    K&N Airfilter
    PAIR valve disabled
    Flapper valve ENABLED (i.e. default)
    Motad headers
    Staintune exhausts (baffle removed)

    82 downloads

    0 comments

    Submitted

  12. 2002 vfr800 dyno tune map for power commander V

    This is a map that was set up on a dyno in Wisconsin. I leaned it out a little in the cruise area. It's set up for a catless header with the flapper air box mod and K&N air filter and using the O2 optimizers. I got this from the tuner I bought my power commander 5 from. Seems to run very smooth and pulls hard.

    121 downloads

    0 comments

    Submitted

  13. 2002-2005 PC3 Map: w/ Catless Headers, Staintunes, & K&N Filter

    This map was Dynotuned on a 2004 w/ 5th Gen Catless Headers, Staintune Slipon Exhaust, 02 Sensor Eliminators, K&N Air Filter, & PC3.
    !!! MAP NOT TO BE USED W/ STOCK HEADERS !!! CATLESS HEADERS ONLY !!!

    260 downloads

    3 comments

    Updated

  14. 2006 - 2007 Honda VFR 800 VTec Downloads

    All availible maps from Dynojet for the VTEC using the PCIII-USB

    270 downloads

    0 comments

    Updated

  15. 2006 Euro PC111 map

    This is a custom map for a 2006 Euro (Australian delivery) VFR800 with the following mods:
    98 ceramic coated headers
    Leo Vince Evo11 carbon mufflers with baffles in
    O2 sensors eliminated
    Flapper deactivated
    Snorkel removed
    Air funnels (velocity stacks) changed to 4 long from standard 2 short 2 long.

    66 downloads

    0 comments

    Updated

  16. 2006 VFR800_Mach 1 Custom PCIII USB

    This is a Mach 1 dyno tuned fuel map for a 2006 VFR800. Mods are listed below.
    2006 VFR800
    Stock Headers
    Two Brothers Dual V.A.L.E. Slip-On Mufflers
    K&N air filter
    Snorkle Removed
    Dynojet O2 eliminator kit
    PAIR System intact but disabled (connector disconnected)
    Flapper Valve Enabled

    157 downloads

    0 comments

    Updated

  17. 2006VFR800MotadScorpionK_N.DJM

    File Name: 2006VFR800MotadScorpionK_N.DJM
    Power Commander PCIII USB + “Accelerator Pump”
    2006 VFR800
    Scorpion Exhaust
    O2 Eliminators
    Motad Catless headers
    K&N Air Filter
    De-flapped,de-snorkled
    All PAIR equipment intact
    97HP Dyno’d in Las Vegas at ~2,000 above sea level, ambient air at 110 degrees F.
    As Cozye said, “If you use the map, and you really like it; why not make a small donation to VFRD ?”

    137 downloads

    1 comment

    Updated

  18. 2007 Australian/Euro vtec gutted cat.djm

    This map suits Australian / Euro 2007 vtec with standard headers but catalytic convertor removed.
    Other mods are 02 sensor eliminators, PAIR system removed flapper and snorkel removed, Leo Vince evo 2 mufflers.

    82 downloads

    0 comments

    Updated

  19. 2007 VTEC Euro-Australian version

    2007 VFR800 VTEC (Euro -Australian model)
    leo vince slip-on exhaust,standard air filter,Airbox Flapper deactivated, snorkel removed,Dynojet O2 eliminator kit, standard headers and CAT.
    Tuned by DM 22-02-09

    87 downloads

    0 comments

    Updated

  20. 5th Gen PCII & PCIII maps

    Some of these I pulled from the Power Commander site. For the files that are corrupt on that site I searched the net and found the missing files on some old plain .html personal blogs such as:
    http://homepage.ntlworld.com/stu.tyrrell/PowerCommanderMaps.htm
    Note that some of the PCII files have modified ignition. 
    Make sure and critically analyze any map before implementing it! I have nothing to do with these maps except that I searched for them and posted them here.
    - Knight
     

    121 downloads

    0 comments

    Updated

  21. AutoTune Logs

    This is a group of log files recorded by the DynoJet LCD-200 unit, driven by a Wideband2 module and a PCV.

    42 downloads

    0 comments

    Submitted

  22. black06vfr's map

    Here it is. A power commander map for a BMC race filter, O2 elims, and Migs exhaust.

    148 downloads

    2 comments

    Updated

  23. buzzbeater vtec map

    Here is my bike setup:
    2006 model
    O2 elims resistors
    98-99 header
    LV carbon fiber cans
    BMC air filter

    87 downloads

    0 comments

    Updated

  24. Coderighter 6.6.12

    I have not changed anything on the bike that will effect the file since the last version, it's just a further refinement thru multiple trim acceptance and tweaking. There's been some confusion about version numbers, so from here forward, the version is the date posted on VFRD. Enjoy!

    155 downloads

    2 comments

    Submitted

  25. Coderighter new, Rev 3 Map. Note some changes in bike setup.

    It's been a while, sorry. I added a vacuum switch to disable Autotune during deceleration. The disabling during deceleration prevents the Autotune from trying to correct the mixture while the bike's EMU is trying to lean it for coast. The Autotune will try to "fix-it" wasting fuel and screwing up the trim map until the next time you hit the corresponding cells.
    I have disconnected the Evap. since the last update.
    Jon

    171 downloads

    0 comments

    Updated


×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.