CapitanBooster Posted August 20, 2014 Share Posted August 20, 2014 Hi, i am Pippo aka Capitan BoosterI come from Rome (Italy) and i am crazy for vfr (this is the fourth)But this time i want .... moreNow ... if you want, I'll tell youAt the beginning was....Working during the week end and finding items during the nigts.....Ehm ... this is for rvf 400This is for the kawa zx6rThis is for the VTR 1000 FAftermarket...From a Ducati ST2 ... Showa and Brembo serie oroSome trouble with the 400 plexyI like it...I did it!!!I see the light across the tunnelBetter for the tire size and the RC designSandy Spare Parts from england for the left exhaust exitMaybe...The engine is closed!!Clean is better..I am tired but a bit :-) Link to comment Share on other sites More sharing options...
Falseneutral Posted March 14, 2016 Share Posted March 14, 2016 An HRC seat pad would finish the tail off nicely,part number 77220-NXA-000 Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 14, 2016 Author Share Posted March 14, 2016 This fits on the rc45 tail? I've yet bought a neoprene sheet to cut Link to comment Share on other sites More sharing options...
Falseneutral Posted March 15, 2016 Share Posted March 15, 2016 It's listed as for RS250s but I have one on an RC30 tail that is on one of my Hawk GTs. Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 15, 2016 Author Share Posted March 15, 2016 Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 16, 2016 Author Share Posted March 16, 2016 Better.... Link to comment Share on other sites More sharing options...
douglasthecook Posted March 16, 2016 Share Posted March 16, 2016 Better.... Flip the back piece so that the rounded part is at the top, I think it works and feels better that way. Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 19, 2016 Author Share Posted March 19, 2016 I've some trouble with the ramair system.... the vfr tank is different from the rc45 tank. Do you know if exist a fiberglass cover tank for rc45? Or a different solution, as for example, a kawasaki tank with the same airbox... Link to comment Share on other sites More sharing options...
The Phantom Posted March 19, 2016 Share Posted March 19, 2016 Kawasaki airbox will be shaped for an inline 4 bank of carbs. You will probably have to mod the tank. Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted March 19, 2016 Member Contributer Share Posted March 19, 2016 NC35 tank, but probably too small... Ciao, Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 30, 2016 Author Share Posted March 30, 2016 My rc46 job-bike.... Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted March 30, 2016 Member Contributer Share Posted March 30, 2016 I first thought it read "vitello" a nice dish from Italia! Will be in Puglia this summer and will eat plenty good food! Link to comment Share on other sites More sharing options...
CapitanBooster Posted March 31, 2016 Author Share Posted March 31, 2016 Very good food in Puglia. Orecchiette, burrata, mozzarella.... must to eat!!! Ready for the exhaust work Link to comment Share on other sites More sharing options...
BRad704 Posted March 31, 2016 Share Posted March 31, 2016 Best looking 4th Gen EVER! Yeah, I said it. Link to comment Share on other sites More sharing options...
CapitanBooster Posted April 2, 2016 Author Share Posted April 2, 2016 Link to comment Share on other sites More sharing options...
CapitanBooster Posted April 19, 2016 Author Share Posted April 19, 2016 The "Voice"... Link to comment Share on other sites More sharing options...
stryker Posted April 25, 2016 Share Posted April 25, 2016 Did you just cut the sandy bikes exhaust and weld a new link pipe on it, or is it a comlpetely custom made exhaust? Are those prefabricated bends or did you bend them yourself? Link to comment Share on other sites More sharing options...
CapitanBooster Posted April 28, 2016 Author Share Posted April 28, 2016 The job was personalized from Galassetti in Rome. He has cut the Sandy Bike exhaust end made it for me (is totally custom made) Link to comment Share on other sites More sharing options...
CapitanBooster Posted May 19, 2016 Author Share Posted May 19, 2016 Link to comment Share on other sites More sharing options...
CapitanBooster Posted May 21, 2016 Author Share Posted May 21, 2016 Link to comment Share on other sites More sharing options...
V4 Rosso Posted May 21, 2016 Share Posted May 21, 2016 Belissima! Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted May 21, 2016 Member Contributer Share Posted May 21, 2016 very very very very nice!!!! Link to comment Share on other sites More sharing options...
CapitanBooster Posted May 21, 2016 Author Share Posted May 21, 2016 First run... Link to comment Share on other sites More sharing options...
duccmann Posted May 22, 2016 Share Posted May 22, 2016 Very nice indeed! Link to comment Share on other sites More sharing options...
Member Contributer Mikey Posted May 22, 2016 Member Contributer Share Posted May 22, 2016 A lot of hard work has paid off CB, fantastic! Link to comment Share on other sites More sharing options...
CapitanBooster Posted June 1, 2017 Author Share Posted June 1, 2017 RC replica on track!! I've finished guys Link to comment Share on other sites More sharing options...
Question
CapitanBooster
Hi, i am Pippo aka Capitan Booster
I come from Rome (Italy) and i am crazy for vfr (this is the fourth)
But this time i want .... more
Now ... if you want, I'll tell you
At the beginning was....
Working during the week end and finding items during the nigts.....
Ehm ... this is for rvf 400
This is for the kawa zx6r
This is for the VTR 1000 F
Aftermarket...
From a Ducati ST2 ... Showa and Brembo serie oro
Some trouble with the 400 plexy
I like it...
I did it!!!
I see the light across the tunnel
Better for the tire size and the RC design
Sandy Spare Parts from england for the left exhaust exit
Maybe...
The engine is closed!!
Clean is better..
I am tired but a bit :-)
Link to comment
Share on other sites
128 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.