I may have a deal on a used Brembo master cylinder - if it's the right size...
Stock 86 VFR master cylinder is stamped 5/8", which translates to 15.87 or roughly 16mm.
I am using CBR600F3 calipers on the bike, but they appear to be about the same as the VFR parts(I know, appearances can be deceiving...)
The Brembo unit I can get is 16x18, will this work for me? There might be another available in 19x20, but that seems way out of line with the stock parts?
Question
SEBSPEED
I may have a deal on a used Brembo master cylinder - if it's the right size...
Stock 86 VFR master cylinder is stamped 5/8", which translates to 15.87 or roughly 16mm.
I am using CBR600F3 calipers on the bike, but they appear to be about the same as the VFR parts(I know, appearances can be deceiving...)
The Brembo unit I can get is 16x18, will this work for me? There might be another available in 19x20, but that seems way out of line with the stock parts?
Thanks!
Link to comment
Share on other sites
45 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.