indianagenius Posted May 11, 2020 Share Posted May 11, 2020 I had some rusty fairing bolts and wanted to find a 300 series Stainless Steel version. This is a before and after photo. They are nice. 2 weeks for delivery from the UK and over 2 dollars/each. But, they are very pretty. I bought ten and will probably order ten more. I am in no way affiliated with the seller. Source was eBay: https://www.ebay.com/itm/10x-Honda-Fireblade-Motorcycle-Fairing-Bolts-M5-x-20mm-Stainless-Pan-Button-Head/131246019644?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Link to comment Share on other sites More sharing options...
Member Contributer mello dude Posted May 11, 2020 Member Contributer Share Posted May 11, 2020 How's it going Indiana? Looks like a good source.... If your really nutz... Probolt is a good vendor too... https://www.probolt-usa.com/ Link to comment Share on other sites More sharing options...
JoelF Posted May 11, 2020 Share Posted May 11, 2020 https://www.belmetric.com/5mm-c-563_581_584_605/sb5x20ss-button-allen-socket-head-stainless-p-3275.html Link to comment Share on other sites More sharing options...
Member Contributer KevCarver Posted May 11, 2020 Member Contributer Share Posted May 11, 2020 12 hours ago, mello dude said: How's it going Indiana? Looks like a good source.... If your really nutz... Probolt is a good vendor too... https://www.probolt-usa.com/ Yeah, I like them for Ti. Link to comment Share on other sites More sharing options...
indianagenius Posted May 11, 2020 Author Share Posted May 11, 2020 12 hours ago, JoelF said: https://www.belmetric.com/5mm-c-563_581_584_605/sb5x20ss-button-allen-socket-head-stainless-p-3275.html These bolts will certainly fit and they are inexpensive. The downside is the small head diameter of 9.5 mm. The stock and SS versions (that I ordered and installed) measure 13.5 mm. So, the low cost version from Belmetric will have a different appearance and not spread the fastening load over as large an area. Link to comment Share on other sites More sharing options...
Member Contributer interceptor69 Posted May 12, 2020 Member Contributer Share Posted May 12, 2020 I found some from Partzilla for $1.54 ea. Not sure if they're stainless tho. I've used them for years. Sent from my SM-G975U using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer JZH Posted May 13, 2020 Member Contributer Share Posted May 13, 2020 Titanium, surely? Mmmmm... Ciao, JZH Link to comment Share on other sites More sharing options...
Member Contributer interceptor69 Posted May 13, 2020 Member Contributer Share Posted May 13, 2020 They look different than those I referenced. Mine are shiny, chrome-like. Link to comment Share on other sites More sharing options...
Member Contributer Mac Morgan Posted May 15, 2020 Member Contributer Share Posted May 15, 2020 Rusty fairing screws...! I never let mine get that bad. I just chuck them up in my drill, apply some semichrome to some 0000 steel wool and they come up looking like chrome. If your fairing screws look like the above one, what’s the rest of your bike like? Link to comment Share on other sites More sharing options...
indianagenius Posted May 16, 2020 Author Share Posted May 16, 2020 5 hours ago, Mac Morgan said: Rusty fairing screws...! I never let mine get that bad. I just chuck them up in my drill, apply some semichrome to some 0000 steel wool and they come up looking like chrome. If your fairing screws look like the above one, what’s the rest of your bike like? Yeah, it’s a real rust-bucket. Link to comment Share on other sites More sharing options...
Member Contributer interceptor69 Posted May 17, 2020 Member Contributer Share Posted May 17, 2020 Touche'Sent from my SM-G975U using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.