CandyRedRC46 Posted March 9, 2014 Share Posted March 9, 2014 Nice! I was beginning to feel like I was the only one. Lol Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer vfr350 Posted March 19, 2014 Member Contributer Share Posted March 19, 2014 So I checked my BMC for cracks or issues, was fine, little dry. Blew off the bugs, reoiled, no need to join the pipercross club yet. My snorkel was just cut flush on the front of the lid, removed it completely now along with the flapper/shelf that was just deactivated before, plugging the top hole. I also noticed at some point I had removed the casting or stress braces on the inside of the lid. Previously I had shimmed the tank front, will see how much more noise it creates. Link to comment Share on other sites More sharing options...
Member Contributer vfr350 Posted March 31, 2014 Member Contributer Share Posted March 31, 2014 Has anyone run a snorkless box and then cut the lid wide open? Wondering if the acoustics of a gutted lid makes more noise than basically an open filter. My first ride today desnorkled and shelfless and she snorted for sure, for sure.... Link to comment Share on other sites More sharing options...
CandyRedRC46 Posted March 31, 2014 Share Posted March 31, 2014 I want to fab up some sort of ram air intake and get a air/fuel gauge and do some street tuning. Sent from my iPhone using Tapatalk And Also Maybe get some sort of data logging system. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer Switchblade Posted March 31, 2014 Member Contributer Share Posted March 31, 2014 I want to fab up some sort of ram air intake and get a air/fuel gauge and do some street tuning. Sent from my iPhone using Tapatalk And Also Maybe get some sort of data logging system. Sent from my iPhone using Tapatalk Pull the blinkers out and use the ports for air in intakes .. Link to comment Share on other sites More sharing options...
Member Contributer MadScientist Posted March 31, 2014 Member Contributer Share Posted March 31, 2014 A quick survey of the nearly disassembled vfr in my garage indicates that routing ram air tubes will be rather difficult. The proximity of the tank, frame, and radiators surrounding the air box location will make routing tubes of sufficient diameter nearly impossible without also scrapping the lower portion of the air box. The only route I can see is straight down the front of the air box and under the head tube. This location is problematic in that it must still remain narrow enough as to not foul the fork tubes at full lock. Not saying ram air is impossible, just that it might take a significant amount of engineering and fabricating to pull off a functional system. Link to comment Share on other sites More sharing options...
Member Contributer CornerCarver Posted March 31, 2014 Member Contributer Share Posted March 31, 2014 Has anyone run a snorkless box and then cut the lid wide open? Wondering if the acoustics of a gutted lid makes more noise than basically an open filter. My first ride today desnorkled and shelfless and she snorted for sure, for sure.... Yes. It is so loud that I cannot tell if it my clutch slipping when I hammer the throttle or the rear wheel breaking loose while it wheelies. I may have to have a couple of spotters in case I need new clutch springs before TexasMac... Link to comment Share on other sites More sharing options...
Member Contributer vfr350 Posted March 31, 2014 Member Contributer Share Posted March 31, 2014 Clutch slippage, thats a good one... I did just change my oil. I hammered on it and the R's jumped to the moon! At this point I'm thinking tire spin, less than a mile into a colder ride. 20 miles later and closer to home it yanked a power wheelie in the upper R's that kinda shocked me. My mapping seems a happier, just going to have to get use to the sound, can't quite hear the rpm over the BUURRRRRRRRRRR! Was thinking the gutted lid amplified the sound, guess not then. Edit: Forgot first ride w new plugs as well, might have added to the smoothness of things. Link to comment Share on other sites More sharing options...
CandyRedRC46 Posted April 4, 2014 Share Posted April 4, 2014 Yes!!! You read my mind! With some modern sport bike signal mirrors, such as a Gixxer etc... Sent from my iPhone using Tapatalk I will do this right after finals! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer vfr350 Posted May 25, 2014 Member Contributer Share Posted May 25, 2014 Little update. So I have tested various configurations with the airbox, including deflapped then added cutting the snorkel flush front. Beginning of this season I went all out pulling the snorkel and also removing the flapper side shelf. Now I love the sound of power but this soon became a bit overwhelming, sometimes hollow sounding and yet it seemed to labor a bit more when lugging. If I spent all day near redline maybe it could be justified but I don't and I like hearing the rest of the bike. So I made yet another change that I and really happy with now and seems to be the strongest yet. I installed both the snork and flap shelf again but I cut them shorter. With this setup the incoming air has less of a hairpin to the front of the filter, but at the same time gives a little roar that is more in harmony with the rest of the bike, bringing that smile when you get on it without being obnoxious. Also have noticed better response when lugging compared to no snork/shelf. I have no proof other than my butt dyno but I thought it was worth sharing for those experimenting. Link to comment Share on other sites More sharing options...
CandyRedRC46 Posted May 25, 2014 Share Posted May 25, 2014 It looks like the 2008 cbr1000rr mirrors have signals in them. I wonder if they line up. Probably closer than Gixxer mirrors. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Alaskan Posted May 25, 2014 Share Posted May 25, 2014 Has anyone who has performed this modification run his bike on a dyno before and after? If so, please post the charts. . Link to comment Share on other sites More sharing options...
CandyRedRC46 Posted May 25, 2014 Share Posted May 25, 2014 The before and after, snorkel and flapper charts have been posted many times. The difference is negligible on an otherwise stock bike. +/-1 hp throughout the rpm range. Without supporting modifications it's just noise. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Member Contributer vfr350 Posted May 26, 2014 Member Contributer Share Posted May 26, 2014 People spend alot of time and money just to make there bike sound different according to these threads, a free one to mess with doesn't hurt. Link to comment Share on other sites More sharing options...
Member Contributer BartmanEH Posted August 17, 2014 Member Contributer Share Posted August 17, 2014 I think my next mod to the air box will be to cover the entire air box with that stick thermo blanket stuff. Try to insulate the air box from the heat of the engine . Like this? I did the bottom half of the air box today. Not sure I'll bother with the top which is pretty much getting enough cool air on it. Link to comment Share on other sites More sharing options...
Alaskan Posted August 17, 2014 Share Posted August 17, 2014 I make a whooshing sound in my helmet when I ride. Same as a snorkel mod, but easier! . Link to comment Share on other sites More sharing options...
Member Contributer BartmanEH Posted August 17, 2014 Member Contributer Share Posted August 17, 2014 I don't see how removing the snorkle can cause water to enter the air box. The air box is under the tank, on top of the engine and behind the frame.It looks pretty protected to me besides where do you think the air for the flapper comes from if honda put the snorkle on the air box to keep out water wouldn't they have added one to the flapper as well?!No water will enter the air box, mine has never had any water in it. It has been gone for almost 5 years..There's no doubt that water enters the air box: This photo was taken after a 9 day ride around Lake Superior that included gravel roads in the rain. The dirt and gravel dust covers the entire flapper shelf and snorkel innards and extended a bit around the inside of the lid of the air box. It's been cleaned which is why you only see the dirt in the not-easily-accessible parts. After my ride around The Rock (Newfoundland) in 2012, I cleaned out fine gravel from around the air filter which was dragged in through the snorkel and de-flappered vent. I'm sure Honda designed our bikes to handle some drops of water etc. Link to comment Share on other sites More sharing options...
Member Contributer BartmanEH Posted August 17, 2014 Member Contributer Share Posted August 17, 2014 I went ahead and insulated the top of the air box too:I'm planning to get a dyno tune for my Power Commander 3 and this seemed like a cheap and easy mod to help get cooler and hence more dense air into the air box. Link to comment Share on other sites More sharing options...
Member Contributer Switchblade Posted August 17, 2014 Member Contributer Share Posted August 17, 2014 Did you do the underside also ? Link to comment Share on other sites More sharing options...
Member Contributer BartmanEH Posted August 19, 2014 Member Contributer Share Posted August 19, 2014 But of course. See here. I credit Switchblade with the idea. Link to comment Share on other sites More sharing options...
Member Contributer Switchblade Posted August 19, 2014 Member Contributer Share Posted August 19, 2014 But of course. See here. I credit Switchblade with the idea. Thanks but I seen it here on someone else bike I think . Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted August 20, 2014 Member Contributer Share Posted August 20, 2014 I believe douglasthecook tried this too. Donot recall him reporting any gains though... Link to comment Share on other sites More sharing options...
Member Contributer BartmanEH Posted August 20, 2014 Member Contributer Share Posted August 20, 2014 There are no expected gains until I get my custom dyno tune for my PC3. It does look nice and spaceship like. For now it goes on the list of cheap cosmetic mods. Link to comment Share on other sites More sharing options...
Member Contributer vfr350 Posted August 21, 2014 Member Contributer Share Posted August 21, 2014 Plastic doesn't retain heat quite like metal, not sure thermal wrapping helps much in this case maybe if it was a longer track, think our in box heat soak is minimized. Link to comment Share on other sites More sharing options...
Alaskan Posted August 21, 2014 Share Posted August 21, 2014 Good luck on the dynotune, Bartman. One of the best mods I have done on my 2004. Post the chart when you're done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.