Owners Manuals and other
PDF files of standard manuals
112 files
-
0 comments
Updated
-
0 comments
Updated
-
Racetech Gold Valve Rebound instructions FRGV S02
By Terry
These are the generic instructions for installing standard RaceTech Gold Valves for rebound.
Using the online valving tool, the recommended valve stack for a 5th gen VFR with 80kg rider who preferred a soft set up is RH16 (5 x 0.15 x 17mm shims).
I also did the same for a VTR1000F as I use that bike's rebound adjusters (I added 15kg to selected rider weight to offset the lighter bike in the calculation) and this recommended the RH17 shim stack (6 x 0.15 x 17mm shims) and 2 turns out for the rebound adjuster.
Other RaceTech literature that I have suggests that for each 13.6kg or rider weight one would shift to the left or right of the recommended shim stack, so if you weigh 93.6kg, the VFR recommendation would be RH17 also.
Both options recommended 0.92-0.93 kg/mm springs with 15mm of preload.
Fork oil height recommended was different for the VFR (120mm) and VTR (140mm) presumably due to the greater volume of the fork cap mechanism on the VTR which would reduce the available air-gap.
94 downloads
0 comments
Submitted
-
VFR 750 F 1990-1992 German Reparatur anleitung
By Friis
VFR 750 F 1990-1992 German Reparatur anleitung
171 downloads
0 comments
Submitted
-
Updated
-
Fork Gold Valve Installation
By Terry
Scanned instructions for the installation of Gold Valves for forks.
111 downloads
0 comments
Submitted
-
Honda, Kawasaki, Yamaha and Suzuki Shock Length's
By redmarque
1 for the shock fiddlers out there!
Not sure of the original author but much credit to them!
Covers most modern Honda, Kawasaki, Yamaha and Suzuki shocks for total length and stoke.
Has 5th-6th Gen VFR only btw
287 downloads
0 comments
Updated
-
VF500 C Service Manual
By YoshiHNS
This is the original service manual for the 1984-85 Honda VF500C. Some information may carry over to the VF500F.
100 downloads
0 comments
Submitted
-
0 comments
Updated
-
Submitted
-
1986_VFR700F_VFR750F-WiringDiagram.png
By DannoXYZ
hi-res schematic for 1986 VFR700F VFR750F RC24
formatted to print on one sheet
VFR700 VFR750 Wiring Diagram
115 downloads
Updated
-
Pro Oiler VFR installation tips.
By V4 Rosso
Two pages with tips for installing a Pro Oiler on a VFR. Models covered are the 3rd to 6th gen. (1990-2009)
Revision 10.1 Nov 2005
227 downloads
0 comments
Submitted
-
VF1000R Shop Manual
By Carlitox33
Standard VF1000R manual. Covers all yeara (84, 85 & 86) and foreign versions.
125 downloads
0 comments
Submitted
-
0 comments
Submitted
-
Submitted
-
2002 VFR800 Engine Management Schematic
By Ladajo
This version of the wiring diagram has updated to show the actual wiring as found on a 2002 VFR800 California Model.
62 downloads
0 comments
Updated
-
Technical Dictionary - English - German
By Friis
Technical Dictionary - English - German / German - English
72 downloads
0 comments
Submitted
-
VFR750FL-P Setup manual
By V4 Rosso
14 page setup and pre-delivery service manual, describing what to do/check/service after the new bike has been uncrated.
1990-1993 VFR750FL-P (RC36)
901 downloads
0 comments
Submitted
-
Lowring_Raiseing_VFR _RC36 _II
By Friis
This is the dimensions of the Lowring and Raiseing triangel for the VFR 750 RC36/2.
At the top - the original triangel but without the dimensions.....no need for that.
In the middle - the lowering triangle.
At the bottom the Raizeing triangle.
94 downloads
0 comments
Submitted
-
0 comments
Updated
-
0 comments
Updated
-
2009-CBR-125-SM_EN&FR
By Guest
English and French Service manual for 2009 CBR 125 (Not sure if it was available in the States or not.) Here it is.
63 downloads
0 comments
Submitted
-
0 comments
Updated
-
VFRD Buisness Cards
This is the simple format that I use for a "Rider" card. I have a "Killboy" on one side and this design on the other. I pass these out to riders I meet in my travels. I hope this is useful.
Kevin
242 downloads
0 comments
Submitted
-
0 comments
Submitted