Power Commander Maps
Fueling Maps for use with Powercomander Moduals
48 files
-
OFFICIAL COZY MAP - (cozye_ver5.djm) - Famous vtec pc3 USB map.
By cozye
Thanks a million to HS for setting up this downloads section. Well, here is my map for everyone to download. This is the same map that is featured in Motorcyclist Magazine (May,07 pg 159).
This map should work perfectly on any 2002-2005 VFR with aftermarket slip on and o2 eliminators. It will work well on any vtec really, regardless of exhaust. If running stock exhaust you may want to go in and lean it up just a touch. Try it first though and see before tweaking. If anyone feels like they can make some improvements, go for it. Many minds are greater than one.
I believe Tinyminds has dyno'd this map and got around 101 hp or so.
This map wont work well on 2006-2007 models with the lower vtec engagement. You could probably take the map and modify it accordingly for the lower vtec range. If someone attempts this, please post it up for other newer vtec guys to use. I've had quite a few 06-07 owners ask for it. My thoughts are that you could copy mine below 6000, and above 8000. Then just mimick what I did with the fuel curve on the dynojet supplied version from 6000-8000. Just smooth out the fuel curve.
enough rambling.
One request however. If you use the map, and you really like it. Why not make a small donation to VFRD ? I would guess there are probably 150 people who have or are using this map (just going by the fact that I have had about 300 request for it). If all those people chipped in 5 bucks, it would be quite a bit of dough to go for our wonderful community. Just a thought. :thumbsup:
1,272 downloads
Updated
-
Cozye's Map Modified for an 06+ VTEC
By Guest
I just modded Cozye's PC3 map and ran it on my '06, pretty impressive power gains with gas milage savings at highway speeds to boot. VTEC is pretty smooth too. I'm going to run it for a while to see how it does. If anyone else decides to run it let me know how it does for you.
680 downloads
Updated
-
2002 - 2005 Honda VFR 800 VTec Downloads
all dydnojet maps availible for the PCIII VTEC
329 downloads
0 comments
Updated
-
Cozye's Map PCIII NON-USB
By Ryanme17
Here is a version of Cozye's map converted to run on a nonUSB PCIII.
Because Cozye's map has adjustments for every 250 RPM, and nonUSB PCIII only has ever 500 RPM, I made a few minor tweaks, usually only 1 % richer to try to get the same AFR between 500 RPM marks, but for the most part, it's just the same numbers copy-pasted over into the different format.
This is for the 2002-2005 models.
146 downloads
0 comments
Updated
-
M16-005-004 - Dynojet Leo&Vince Map
By jay-d
This is the missing map from Dynojet's website for the PCV.
2006+
Leo & Vince aftermarket slip ons
Power Commander 5
Aftermarket or stock air filter
Dynojet 02 Eliminators
237 downloads
Updated
-
2000-2001 VFR Power Commander Maps
all availible maps from Dynojet for the PCIII version y2k 5th gen with closed loop injection (o2 sensors) this is a self exstracting zip file
200 downloads
Updated
-
2002-2005 PC3 Map: w/ Catless Headers, Staintunes, & K&N Filter
By tinyminds
This map was Dynotuned on a 2004 w/ 5th Gen Catless Headers, Staintune Slipon Exhaust, 02 Sensor Eliminators, K&N Air Filter, & PC3.
!!! MAP NOT TO BE USED W/ STOCK HEADERS !!! CATLESS HEADERS ONLY !!!
274 downloads
Updated
-
black06vfr's map
By Guest
Here it is. A power commander map for a BMC race filter, O2 elims, and Migs exhaust.
151 downloads
Updated
-
2006VFR800MotadScorpionK_N.DJM
By canib
File Name: 2006VFR800MotadScorpionK_N.DJM
Power Commander PCIII USB + “Accelerator Pump”
2006 VFR800
Scorpion Exhaust
O2 Eliminators
Motad Catless headers
K&N Air Filter
De-flapped,de-snorkled
All PAIR equipment intact
97HP Dyno’d in Las Vegas at ~2,000 above sea level, ambient air at 110 degrees F.
As Cozye said, “If you use the map, and you really like it; why not make a small donation to VFRD ?”
141 downloads
Updated
-
Modified Cozy_ver5 for PCV
By tdmp
I took Cozy's ver_5 PCIII map (.djm) and copied it over to work on a PCV (.pvm). The only difference is the PCV has a 15% throttle were the PCIII does not. I just took an average between the 10% and 20% throttles for this column and it seems to work well. See Cozy ver_5 original description for more info.
I have an 02 VFR with BMC air-filter, O2 eliminators, PAIR mod and gutted stock exhaust (cat still in place). I have to say this map is excellent. Low rpm performance (under 3000) is much cleaner and throttle is more responsive. At partial throttle (under 50%), there is practically no VTEC transition. This map should work well for the 02 - 05 models but might be a little rich for stock exhaust.
The only area I see that could use a little improvement seems to be the VTEC transition at large throttle openings (more than 50%). The transition is noticeable but no where near as bad as stock.
tdmp
431 downloads
Updated
-
Dyno custom map for torque
By skot2003VFR
This map came loaded in my new to me 2003 VFR800. The guy who had the bike before the girl I bought the bike from had it dyno'd to his specs with a LeoVince and K&N air filter setup. This is pretty torqued for me (I am also new to sport/touring bikes). I loaded in the generic LeoVince map from the power commander site and that one is a little gentler to me, but I wanted to contribute something to the community. Let me know if you like it. I don't think this map is used for gas mileage.
131 downloads
Submitted
-
1998-1999 VFR Power Commander Maps
All availible PCII maps from Dynojet for the 5th generation open loop fuel injection system NO O2 sensors
286 downloads
Updated
-
1998-1999 VFR Power Commander Maps California
All availible pcII maps from Dynojet for the California Model 5th gen bike open loop fuel injection system NO O2 sensors
77 downloads
0 comments
Updated
-
2006 - 2007 Honda VFR 800 VTec Downloads
All availible maps from Dynojet for the VTEC using the PCIII-USB
277 downloads
0 comments
Updated
-
2006 Euro PC111 map
By shayne
This is a custom map for a 2006 Euro (Australian delivery) VFR800 with the following mods:
98 ceramic coated headers
Leo Vince Evo11 carbon mufflers with baffles in
O2 sensors eliminated
Flapper deactivated
Snorkel removed
Air funnels (velocity stacks) changed to 4 long from standard 2 short 2 long.
67 downloads
0 comments
Updated
-
VTEC 2002, EU version
By Guest
BMC Air filter
TwoBros exhaust
O2 elims
If you have TWO BROS on EU model, you can try this map. There is no special map for EU model with TWOBROS shipped from PC and I had very bad transition at 7k rpm with all other EU maps and these exhausts.
Supplied maps are too rich at 7k rpm and throttle opened at 40%-60%.
mk
79 downloads
0 comments
Updated
-
Cozeys map PC3 non usb
By Guest
Cozeys map for non usb model power commander 3. Every other line taken out to work with rpm change every 500 rpms instead of every 250 rpms as with PC3 usb model. For some reason it would not let me use the .map file extension so I just picked another one that it would let me load. I think you can just change it manually from .mov to .map and it should work fine.
65 downloads
0 comments
Updated
-
2007 VTEC Euro-Australian version
By dogman
2007 VFR800 VTEC (Euro -Australian model)
leo vince slip-on exhaust,standard air filter,Airbox Flapper deactivated, snorkel removed,Dynojet O2 eliminator kit, standard headers and CAT.
Tuned by DM 22-02-09
94 downloads
0 comments
Updated
-
buzzbeater vtec map
By Guest
Here is my bike setup:
2006 model
O2 elims resistors
98-99 header
LV carbon fiber cans
BMC air filter
88 downloads
0 comments
Updated
-
'06 PCV Autotune generated map
By coderighter
My bike is an '06 with Remus Carbon fibers, BMC filter, and PAIR plugged. I started with the Dynojet Staintune map because it was the richest (safest) of the none stock pipe maps. It has since been Autotuned with the trims accepted 10 times. At this point most of the common cells have been "autotuned". The rest are still at the Staintune setting. I will try to reload this download every month or so, as I ride and more cells get set.
Even if you don't have a PCV but have a PCIII, you could download PCV software at Dynojet.com (free) and open the file and look at the setting. This might help you make informed choices on map setting in your PCIII.
97 downloads
0 comments
Updated
-
1998-1999 vfr 800 PC3 usb - staintune K&N or stock filter
After recently purchasing a PC3 usb unit after my trusty pc2 unit finally died (70k) miles I found that my old map file from the PC2 were no longer compatable. So I carefully collected the seperate tables on the PC2 and extrapolated the data into the PC3 usb software, averaging and smoothing the extra data points for the usb unit. conversion from .map file to .djm
127 downloads
0 comments
Submitted
-
'06 PCV Autotune generated map Rev 15
By coderighter
A little leaner just off idle in lower gears. More cells filled in. Please leave feedback.
Jon
139 downloads
Updated
-
PC3 USB Staintune 1998-2001 5th gen European map
This is a direct transcription of the pc2 files posted at dynojet I combined the AAP tables and MP file tables from the original(map)file and converted it into a single (dmj) file table. The european staintune map is considerably leaner than the US version over the entire range of rpm and throttle postion.
I found it has good fuel economy and smooth power delivery for my 1998 vfr high mount staintune with silencer bud and K&N filter I used this map exclusivly when I had my old PC2. I get 40-42 mpg with this map riding 70-80 mph on the highways. I went back to this map after suffering 35mpg from the us version when I upgraded from the PC2 to a PC3 usb with no noticible difference in performance, I transcribed the old european pc2 map and made this file. The leaned out areas actually remove some flat spots from OEM fuel map hard coded in the ECM of the bike.
174 downloads
0 comments
Submitted
-
PC111 usb 2002-2005 Vtec Australian / Euro. Modded Cozye map
By Guest
Map for 2002 Vtec Aust / Euro with Staintunes, o2 elim, K&N filter, Cat converter drilled (gutted)
Based on Cozye's map for PC111 usb, but tweaked for AU. on Dyno.
135 downloads
Updated
-
2007 Australian/Euro vtec gutted cat.djm
By dogman
This map suits Australian / Euro 2007 vtec with standard headers but catalytic convertor removed.
Other mods are 02 sensor eliminators, PAIR system removed flapper and snorkel removed, Leo Vince evo 2 mufflers.
90 downloads
0 comments
Updated