Member Contributer VFRiderGal Posted November 10, 2006 Member Contributer Share Posted November 10, 2006 I am looking for sound clips for exhaust systems on the VFR. :music: I would like to listen to what different systems sound like installed on the VFR. I've been thumbing through this topic and am not seeing too many... I know they have to be out there. :D I've even done a google search and I'm coming up short. If there isn't one location, I'm curious if The-one-&-only-computer-guru-super-motorcycle-God-HispanicSlammer can hook us up?!?!?! What a cool resource that would be! :thumbsup: Link to comment Share on other sites More sharing options...
Guest Posted December 14, 2006 Share Posted December 14, 2006 I know one has been posted previously but I added a new clip the other day with the ol staintune (2nd link) at a half throttle acceleration. See what ya think... http://s115.photobucket.com/albums/n281/cl...nt=MOV00786.flv http://s115.photobucket.com/albums/n281/cl...rrent=Movie.flv Link to comment Share on other sites More sharing options...
Member Contributer Rivcyko Posted December 14, 2006 Member Contributer Share Posted December 14, 2006 Been think 'bout this too. We need a contol. ex: Recording devise must be at 0 on gains, and such. Bike, outside, with no immediate surroundings,..say a 8 foot radius? The mic pointing directly at the back of the bike, then at a 90 deg. angle. Say,.. 5 feet back, 3 feet off the ground? Perhaps with enough samples, like that, we could get H.S. to pin a sound gallery. Do the bike yr., milage, engine mods, etc. There has been mention of some members willing to host some space. :warranty: Yup! Definatly think'n too much. I go to work now. Link to comment Share on other sites More sharing options...
Member Contributer SAFE-T Posted December 15, 2006 Member Contributer Share Posted December 15, 2006 Best sounding systems I've heard: Micron (large oval/carbon) - deepest and boomiest Remus (large oval/titanium) - quieter version of the Micron Staintune (small round/stainless) - most unique and gnarliest Kerker (large round/titanium) - combination of the Micron and Staintune Link to comment Share on other sites More sharing options...
enzed_viffer Posted December 15, 2006 Share Posted December 15, 2006 Been think 'bout this too. :idea3: I nearly did a recording the other week (well... I nearly got PuddingPimp to do it) using a decent set up, when we were recording The Death Of Grandma's Old Piano. Link to comment Share on other sites More sharing options...
Member Contributer SAFE-T Posted December 15, 2006 Member Contributer Share Posted December 15, 2006 Hope this works Link to comment Share on other sites More sharing options...
Guest SuperJ Posted December 15, 2006 Share Posted December 15, 2006 I know one has been posted previously but I added a new clip the other day with the ol staintune (2nd link) at a half throttle acceleration. See what ya think... I think I almost messed my pants it sounded so good. I love the aggressive bark of the Staintune... much different than an inline four with a slip on. I'd love to hear a drilled stock exhaust. Link to comment Share on other sites More sharing options...
Guest Posted December 15, 2006 Share Posted December 15, 2006 Been think 'bout this too. We need a contol. ex: Recording devise must be at 0 on gains, and such. Bike, outside, with no immediate surroundings,..say a 8 foot radius? The mic pointing directly at the back of the bike, then at a 90 deg. angle. Say,.. 5 feet back, 3 feet off the ground? Perhaps with enough samples, like that, we could get H.S. to pin a sound gallery. Do the bike yr., milage, engine mods, etc. There has been mention of some members willing to host some space. :idea3: Agreed! Link to comment Share on other sites More sharing options...
Guest fulcrum Posted December 15, 2006 Share Posted December 15, 2006 There was a page on the net where someone reviewed a few different exhausts on the VTEC VFR. They had sound clips and talked not only about the sounds, but ease of installation, customer service, quality of fittings, etc. The sound clips included: 1) Standard pipe 2) No pipe 3) Baffled Staintune 4) Unbaffled Staintune 5) Micron 6) Another one that I can't remember I just spent a few minutes searching and can't find the page I'll see if I have the link saved at home. Link to comment Share on other sites More sharing options...
enzed_viffer Posted December 15, 2006 Share Posted December 15, 2006 :idea3: I know one has been posted previously but I added a new clip the other day with the ol staintune (2nd link) at a half throttle acceleration. See what ya think... I think that presumably mine sounds that good too, seeing it's also got a Satantune. Trouble is, I've never heard it, except from the pilot's perch. :biggrin: Here's something amazing: I know it's not VFR, but it IS a Mini-ceptor (almost). Ok - a MiniHawk then. I think iffen I didn't already have a Satantune on, I'd get them (Neptune) to make me a zorst. When I enquired about prices for VFR800, surprisingly enough they'd never made one, but were happy to use my bike as a prototype, at a discounted price. Whoops! Wrong linky; I was thinking of this one: Link to comment Share on other sites More sharing options...
Member Contributer BadDestiny Posted December 15, 2006 Member Contributer Share Posted December 15, 2006 There was a page on the net where someone reviewed a few different exhausts on the VTEC VFR. They had sound clips and talked not only about the sounds, but ease of installation, customer service, quality of fittings, etc.The sound clips included: 1) Standard pipe 2) No pipe 3) Baffled Staintune 4) Unbaffled Staintune 5) Micron 6) Another one that I can't remember I just spent a few minutes searching and can't find the page I'll see if I have the link saved at home. Yes! I remember that page... Oddly enough I tried accessing it today but its no longer working... I had saved the Standard Pipe, Baffled Staintunes and Unbaffled Staintune. Here you go! Link to comment Share on other sites More sharing options...
Member Contributer BadDestiny Posted December 15, 2006 Member Contributer Share Posted December 15, 2006 There was a page on the net where someone reviewed a few different exhausts on the VTEC VFR. They had sound clips and talked not only about the sounds, but ease of installation, customer service, quality of fittings, etc.The sound clips included: 1) Standard pipe 2) No pipe 3) Baffled Staintune 4) Unbaffled Staintune 5) Micron 6) Another one that I can't remember I just spent a few minutes searching and can't find the page I'll see if I have the link saved at home. Yes! I remember that page... Oddly enough I tried accessing it today but its no longer working... I had saved the Standard Pipe, Baffled Staintunes and Unbaffled Staintune. Here you go! Hey! I found something else that I had saved from that site... an installation guide for the Staintune for 6th Gen VFRs. Here it is in PDF format. Might be usefull since it has some nice Pics... Sorry I did not save the Micron or Two Bros part... I had my mind set on the staintunes :idea3: The URL of that site used to be : http://www.is2k.com/autozone/exhaust_staintune_install.htm Link to comment Share on other sites More sharing options...
Member Contributer FotoMoto Posted December 15, 2006 Member Contributer Share Posted December 15, 2006 Here's mine with a link to sound: http://www.vfrdiscussion.com/forum/index.php?showtopic=26748 Link to comment Share on other sites More sharing options...
Veefer800Canuck Posted December 15, 2006 Share Posted December 15, 2006 Clicky: Link to comment Share on other sites More sharing options...
Member Contributer Rivcyko Posted December 30, 2006 Member Contributer Share Posted December 30, 2006 I know one has been posted previously but I added a new clip the other day with the ol staintune (2nd link) at a half throttle acceleration. See what ya think... I think I almost messed my pants it sounded so good. I love the aggressive bark of the Staintune... much different than an inline four with a slip on. I'd love to hear a drilled stock exhaust. Drilled stock? Or Staintuned? http://www.vfrdiscussion.com/forum/index.php?showtopic=23155 Post #14 Link to comment Share on other sites More sharing options...
KanadianKen Posted December 30, 2006 Share Posted December 30, 2006 THe sounds of the exhaust will always be subjective to your own ears. I love the gutted exhaust I'm running, it was cheap, effective, and kept the stock look which I like. I just listened to Fotomoto's Leo exhasut - that sounds great!! VeeferCanucks undertail - awesome as well. TO each his own! :thumbsup: Link to comment Share on other sites More sharing options...
Guest Posted December 31, 2006 Share Posted December 31, 2006 Here is a TB's carbon that has been cut in half. Its a dyno run with a few good pulls. The sound is hypnotic. Caution dial up its 2:44 long Enjoy F&F Link to comment Share on other sites More sharing options...
Member Contributer VFRiderGal Posted January 10, 2007 Author Member Contributer Share Posted January 10, 2007 You guys (& gals) are awesome! Unfortunately, I've spent much of my bonus and Christmas $$ on some other mods. I have a few pennies left, but not enough for a new exhaust. That's ok though.... I was prioritizing needs over wants. I've gotta admit, that's tough to do with these beauties! [Either I'll save my pennies for the exhaust, or I'll just gut 'em. It would be nice to score a used set (maybe with a small ding or two) dirt cheap!] Anywho... just wanted to say thanks again for all who tossed up sound clips. :music: Hope it helps others too! :thumbsup: ~ Jodie Link to comment Share on other sites More sharing options...
Member Contributer Rivcyko Posted January 10, 2007 Member Contributer Share Posted January 10, 2007 You guys (& gals) are awesome! Unfortunately, I've spent much of my bonus and Christmas $$ on some other mods. I have a few pennies left, but not enough for a new exhaust. That's ok though.... I was prioritizing needs over wants. I've gotta admit, that's tough to do with these beauties! [Either I'll save my pennies for the exhaust, or I'll just gut 'em. It would be nice to score a used set (maybe with a small ding or two) dirt cheap!] Anywho... just wanted to say thanks again for all who tossed up sound clips. :music: Hope it helps others too! :thumbsup: ~ Jodie Slammer had mentioned direct submission of exhaust clips, to his e-mail, for server space. (The previous perameters, I had mentioned, are what I took my drilled, at, [- the 90 degree]). :salesman: Flash, Missed your avatar. Fits nicely. :thumbsup: Glad you went to the old one. It works. Link to comment Share on other sites More sharing options...
Guest Posted January 10, 2007 Share Posted January 10, 2007 Flash, Missed your avatar. Fits nicely. :thumbsup: Glad you went to the old one. It works. Thanks I think that dancing spidy is hilarious and so does my daughter, so I guess it stays. Not sure why once and awhile it stops being animated, maybe the hosting site glitches every now and again ????? My screen name is more of a play on my profession as a skilled welder, but hey thanks for leading the ppl down the wrong path. LOL F&F Link to comment Share on other sites More sharing options...
Member Contributer spotthedogg Posted February 13, 2007 Member Contributer Share Posted February 13, 2007 http://s14.photobucket.com/albums/a310/spo...es082606011.flv My Remus carbon Grand Prix Link to comment Share on other sites More sharing options...
Member Contributer BusyLittleShop Posted February 13, 2007 Member Contributer Share Posted February 13, 2007 I don't have a sound clip for Mr.RC45 V4 but it shares the 360 degree crank firing order of this Ducati Desmosedici 990 V4 and thus produces the same distinctive drone sound... I believe 360º crank 990 V4s are the sound of the future... Start http://www.hyperpastabiker.net/desmosedici_start.mp3 Fly by http://www.hyperpastabiker.net/desmosedici%20fly%20by.mp3 Link to comment Share on other sites More sharing options...
Member Contributer Rivcyko Posted January 15, 2008 Member Contributer Share Posted January 15, 2008 Bump. Since the player is gone, and I have this new clip. 6th gen w/BOS, (I believe the baffles are out). http://media.putfile.com/Dont-mess-with-Kev-BOS-audio-clip Lets keep this thread going. Link to comment Share on other sites More sharing options...
Guest Posted January 15, 2008 Share Posted January 15, 2008 I wish I had a way to post one of my NC30. At one time I had it nearly gutted and not too long ago put fresh stainless mesh and new packing. Sounds even better than when I got it. I have the Viper, they come in three sizes a shortie, one a bit longer and a full size. For a budget they are great. Link to comment Share on other sites More sharing options...
Guest Posted February 5, 2008 Share Posted February 5, 2008 There was a page on the net where someone reviewed a few different exhausts on the VTEC VFR. They had sound clips and talked not only about the sounds, but ease of installation, customer service, quality of fittings, etc.The sound clips included: 1) Standard pipe 2) No pipe 3) Baffled Staintune 4) Unbaffled Staintune 5) Micron 6) Another one that I can't remember I just spent a few minutes searching and can't find the page I'll see if I have the link saved at home. Could you possibly be referring to this website??? Not too many sound clips these days, but it does describe the other info you mentioned. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.