Power Commander Maps
Fueling Maps for use with Powercomander Moduals
48 files
-
Dyno custom map for torque
By skot2003VFR
This map came loaded in my new to me 2003 VFR800. The guy who had the bike before the girl I bought the bike from had it dyno'd to his specs with a LeoVince and K&N air filter setup. This is pretty torqued for me (I am also new to sport/touring bikes). I loaded in the generic LeoVince map from the power commander site and that one is a little gentler to me, but I wanted to contribute something to the community. Let me know if you like it. I don't think this map is used for gas mileage.
131 downloads
Submitted
-
PC3 USB Staintune 1998-2001 5th gen European map
This is a direct transcription of the pc2 files posted at dynojet I combined the AAP tables and MP file tables from the original(map)file and converted it into a single (dmj) file table. The european staintune map is considerably leaner than the US version over the entire range of rpm and throttle postion.
I found it has good fuel economy and smooth power delivery for my 1998 vfr high mount staintune with silencer bud and K&N filter I used this map exclusivly when I had my old PC2. I get 40-42 mpg with this map riding 70-80 mph on the highways. I went back to this map after suffering 35mpg from the us version when I upgraded from the PC2 to a PC3 usb with no noticible difference in performance, I transcribed the old european pc2 map and made this file. The leaned out areas actually remove some flat spots from OEM fuel map hard coded in the ECM of the bike.
174 downloads
0 comments
Submitted
-
05 PCV individual cylinder Dyno Tune
Hey guys,
after installing my new complete exhaust system i set the big girl off for a tune.
asked for the guy to tune each cylinder individually.
came back with this..
runs really nice. only thing i might change would be first thing in the morning some times the big will stall when you come off the throttle.
let me know if someone knows how to fix this.
thanks. hope someone enjoys this..
120 downloads
Updated
-
2002 VFR with 2006 injectors, custom PCV map
By kaldek
This is a custom map for a 2002 6th-gen with the following mods:
2006 model injectors
K&N Airfilter
PAIR valve disabled
Flapper valve ENABLED (i.e. default)
Motad headers
Staintune exhausts (baffle removed)
87 downloads
0 comments
Submitted
-
5th Gen PCII & PCIII maps
By Knight
Some of these I pulled from the Power Commander site. For the files that are corrupt on that site I searched the net and found the missing files on some old plain .html personal blogs such as:
http://homepage.ntlworld.com/stu.tyrrell/PowerCommanderMaps.htm
Note that some of the PCII files have modified ignition.
Make sure and critically analyze any map before implementing it! I have nothing to do with these maps except that I searched for them and posted them here.
- Knight
145 downloads
0 comments
Updated
-
PC111 usb 2002-2005 Vtec Australian / Euro. Modded Cozye map
By Guest
Map for 2002 Vtec Aust / Euro with Staintunes, o2 elim, K&N filter, Cat converter drilled (gutted)
Based on Cozye's map for PC111 usb, but tweaked for AU. on Dyno.
135 downloads
Updated
-
'06 PCV Autotune generated map
By coderighter
My bike is an '06 with Remus Carbon fibers, BMC filter, and PAIR plugged. I started with the Dynojet Staintune map because it was the richest (safest) of the none stock pipe maps. It has since been Autotuned with the trims accepted 10 times. At this point most of the common cells have been "autotuned". The rest are still at the Staintune setting. I will try to reload this download every month or so, as I ride and more cells get set.
Even if you don't have a PCV but have a PCIII, you could download PCV software at Dynojet.com (free) and open the file and look at the setting. This might help you make informed choices on map setting in your PCIII.
97 downloads
0 comments
Updated
-
Stock M111-08 map leaned out
By skot2003VFR
this is for a Leo Vince slip on, K & N air filter setup. It has been leaned out for better fuel economy. Getting mid to upper 30's mpg with this one. It's pretty nice.
99 downloads
Submitted
-
1998-1999 vfr 800 PC3 usb - staintune K&N or stock filter
After recently purchasing a PC3 usb unit after my trusty pc2 unit finally died (70k) miles I found that my old map file from the PC2 were no longer compatable. So I carefully collected the seperate tables on the PC2 and extrapolated the data into the PC3 usb software, averaging and smoothing the extra data points for the usb unit. conversion from .map file to .djm
127 downloads
0 comments
Submitted
-
1998-1999 VFR Power Commander Maps California
All availible pcII maps from Dynojet for the California Model 5th gen bike open loop fuel injection system NO O2 sensors
77 downloads
0 comments
Updated
-
buzzbeater vtec map
By Guest
Here is my bike setup:
2006 model
O2 elims resistors
98-99 header
LV carbon fiber cans
BMC air filter
88 downloads
0 comments
Updated
-
2007 Australian/Euro vtec gutted cat.djm
By dogman
This map suits Australian / Euro 2007 vtec with standard headers but catalytic convertor removed.
Other mods are 02 sensor eliminators, PAIR system removed flapper and snorkel removed, Leo Vince evo 2 mufflers.
90 downloads
0 comments
Updated
-
09vfr800a.zip
By dawson
A zip file containing some log files generated by a DynoJet LCD-200. Files include data on AFR, TPS, duty cycle, rpm, engine temp (straight voltage from sensor) and MAP (voltage from sensor). All files can be opened in a spreadsheet to generate graphs, etc.
Just for general interest.
Bike is an '09 VFR800A with stock airbox, stock exhaust and the PAIR is blocked.
54 downloads
0 comments
Submitted
-
0 comments
Updated
-
2007 VTEC Euro-Australian version
By dogman
2007 VFR800 VTEC (Euro -Australian model)
leo vince slip-on exhaust,standard air filter,Airbox Flapper deactivated, snorkel removed,Dynojet O2 eliminator kit, standard headers and CAT.
Tuned by DM 22-02-09
94 downloads
0 comments
Updated
-
VTEC 2002, EU version
By Guest
BMC Air filter
TwoBros exhaust
O2 elims
If you have TWO BROS on EU model, you can try this map. There is no special map for EU model with TWOBROS shipped from PC and I had very bad transition at 7k rpm with all other EU maps and these exhausts.
Supplied maps are too rich at 7k rpm and throttle opened at 40%-60%.
mk
79 downloads
0 comments
Updated
-
PCV 2002-2005 catless map. 46-48mpg highway
By mvvette97
This map is for the 2002-2005 VFR800. mods are K&N filter snorkel mod, 1999 catless headers, stock mufflers completely gutted, and the 02 delete or optimizers. Runs very smooth and gets around 48mpg on the highway. I'm going to be checking the WOT fueling when my wideband gets here. The current 100% fuel setting is from a dyno tuner in wisconsin but I want to check it for myself. I also have the acc pump activated sensitivity 65.9 30 revs and 15% fuel.. Took it to the 1/8 mile strip with this and ran a 7.40 at 101 and that was my first time running it at the track. I will update the WOT fueling after I get the wideband.
122 downloads
Submitted
-
2006 Euro PC111 map
By shayne
This is a custom map for a 2006 Euro (Australian delivery) VFR800 with the following mods:
98 ceramic coated headers
Leo Vince Evo11 carbon mufflers with baffles in
O2 sensors eliminated
Flapper deactivated
Snorkel removed
Air funnels (velocity stacks) changed to 4 long from standard 2 short 2 long.
67 downloads
0 comments
Updated
-
rhema83_pcv_at_7.19.13
By Guest
Power Commander V with Autotune module - 3 trims
'08 VFR800A
Leo Vince Evo II Slip On Exhaust
K&N Air Filter
PAIR disabled
98 downloads
0 comments
Submitted
-
2002 vfr800 dyno tune map for power commander V
By mvvette97
This is a map that was set up on a dyno in Wisconsin. I leaned it out a little in the cruise area. It's set up for a catless header with the flapper air box mod and K&N air filter and using the O2 optimizers. I got this from the tuner I bought my power commander 5 from. Seems to run very smooth and pulls hard.
131 downloads
0 comments
Submitted
-
AutoTune Logs
By dawson
This is a group of log files recorded by the DynoJet LCD-200 unit, driven by a Wideband2 module and a PCV.
45 downloads
0 comments
Submitted
-
16-005-508/018 blend
By MattyIce
This is my first post, but I have been reading the forum for years. I just got a PCV during the pandemic to kill some time and ran into a dead end in terms of maps for my bike:
1999 VFR800 with Vance & Hines SSR slip-on, airbox top lid removed (no flapper, snorkel, etc) with pipercross high flow filter in place. Before installing the PCV it was sounding and feeling like a 250 parallel twin until I fattened up the "1998-1999 Erion slip-on" map from Dynojet, by adding the difference in fueling points between the 16-005-503 vs 16-005-508 maps between 2% - 20% WOT until 6000 RPM to accommodate the "airbox valve disabled" as its listed in the Dynojet notes. Although, Dynojet support advised against using the European maps at first, I was able to make it work by subtracting -6 points (~2 jet sizes) from the fueling numbers on 16-005-508 across the table from 2-20% and from 750 - 6000 RPM (assuming my ECU is enabling the 2nd intake track at 5500 rpm and disabling it at 5000 rpm, per the service manual) I test drove it today and it does make a big difference. Again this map is a hybrid mix of the Euro '02 airbox valve disabled map and the '98 erion slip-on map 16-005-018. I have tried out all the other maps listed here on this forum and this one works best for my bike. Cheers!
38 downloads
0 comments
Submitted
-
2007 VFR800 VTEC Motad downpipes, Staintunes exhaust
By Dorian
Custom map for a 2007 UK VFR with the following mods:
- Staintunes cans
- Motad catless downpipe/headers
- PAIR valve blocked
- o2 eliminators
13 downloads
0 comments
Submitted