Switchblade

GOOD JOB and yeah VFR are hard on air filter ....

Sent you a PM....

A couple of problems with VFRness kit with acces. 1. What do you suggest to do with the old stator and r/r wire connections 2. From the VFRness harness to the 4 port Acces. there no way to connect the purple wires together . 3. Send a couple 15A fuses for the 4 port Acces. block. Here are pix's of the purple (both female connectors) wires. P.S. I have email you a couple of times ..............

+1 Everything worked as it should when I turned the adjustment knob. You could even hear a change in the throttle bodies (Hissing noise) as I turned the knob back and forth, but there was no change in idle speed. It just hovered around 1000-1100 rpm and didn't change when turning the knob. Once everything was connected the adjustment knob worked. Switchblade, are you saying the the "non adjustable" valve is actually adjustable?? I just adjusted them to 19Hg across the board, put everything back together and adjusted the idle up a bit from there. Two of the cylinders were way off (10 and 15). I only drove it around the block late last night so I don't know if there is any drastic change. This bike has always had a horrible surge and a really jerky throttle response. Been that way since new, maybe I have something else wrong Locktite #3 in at what ever the book tells you to and set the other three to the same value and that solve all throttle problems !!!!!

Never seen that before. When you were adjusting the screw could you see the pistons moving at all, or even the idle adjustment plate move? Make sure your base line cylinder which I think is #3 is at its preliminary setting. Had the same problem when I did mine thefirst time. Its was supposed to be lock tite to a factory value. It was not and vibrated to different setting. Drove me crazy for about 15 minutes.

I HAVE A SPARE COVER HOW MUCH TO DO MINE ?

GOOD JOB !!!!!!!!!!!

If it is left hand thread just use normal bit(right twist) with a drill and drill it out !!!!!!!!!!!!!!

Thats NICE ............

P.M. sent .......................

My R/R went out shortly after installing the MOTY, not sure if it was the cause but did not like the timing.

"""""WOW"""""""""

I bought this one. $90.00 Shorai .. https://www.motomumm...id=18829&page=1 More I read about the Moty the more I did not like it. Sorry about it crap out on you ..

GOOD start , keeps us posted please ............

LOOKS LIKE A GOOD WINTER PROJECT !!!!!!!!

+1 and sometimes you can find 3 filter pack on FleaBay and AMAZON for around $13.00 !!!!!!!!!!