Member Contributer Duc2V4 Posted September 13, 2012 Member Contributer Share Posted September 13, 2012 So I am getting around to ordering my Stainless Steel braided clutch and brake lines for my 2009 VFR800 (non ABS) and I figured I put in some Speed Bleeders while I'm at it. Can someone check me on the quantity I need? I counted 7 bleed points but I thought I would check just in case I missed one located under the body panels. Also, they all appear to be the same size, is that accurate too? Front Left Caliper - Qty. 2 Front Right Caliper - Qty. 1 Proportional Valve - Qty, 1 (under seat) Rear Caliper - Qty. 2 Clutch Slave - Qty. 1 -------------------------- Total : 7 Cheers Quote Link to comment Share on other sites More sharing options...
SEBSPEED Posted September 13, 2012 Share Posted September 13, 2012 Hit up Tightwad at www.wiremybike.com, he has a full kit you can order, has everything you need. Quote Link to comment Share on other sites More sharing options...
Member Contributer FJ12Ryder Posted September 14, 2012 Member Contributer Share Posted September 14, 2012 That's where I got my set. He puts in a couple long ones for a couple of the front. Yes, it takes 7, and they are great. Quote Link to comment Share on other sites More sharing options...
Member Contributer Duc2V4 Posted September 14, 2012 Author Member Contributer Share Posted September 14, 2012 I bought some direct from Speed Bleeder for my Duc and I am very happy with them, but I'll check out the link, I always like to support fellow forum members. Thanks for responding guys! Cheers Quote Link to comment Share on other sites More sharing options...
Member Contributer Duc2V4 Posted September 23, 2012 Author Member Contributer Share Posted September 23, 2012 Speed Bleeders from www.wiremybike.com are officially on their way. I got the shipping notice on Friday. FYI, buying them from WMB was a bit cheaper than buying them direct and they had all the parts as a kit vs. having to order them individually from SB direct, so cheers on the referral Seb! Quote Link to comment Share on other sites More sharing options...
Member Contributer AnikMankar Posted September 27, 2012 Member Contributer Share Posted September 27, 2012 by SS ones ...a little bit more and they dont rust. Quote Link to comment Share on other sites More sharing options...
Member Contributer Duc2V4 Posted September 27, 2012 Author Member Contributer Share Posted September 27, 2012 by SS ones ...a little bit more and they dont rust. Bought the SS for both the Duc and the VFR. I did have to wait a little longer to get them from wiremybike, but they arrived on Monday so hopefully I'll be able to install them soon. They'll be going on when I swap out my clutch/brake lines with SS lines. Quote Link to comment Share on other sites More sharing options...
Member Contributer AnikMankar Posted September 27, 2012 Member Contributer Share Posted September 27, 2012 by SS ones ...a little bit more and they dont rust. Bought the SS for both the Duc and the VFR. I did have to wait a little longer to get them from wiremybike, but they arrived on Monday so hopefully I'll be able to install them soon. They'll be going on when I swap out my clutch/brake lines with SS lines. Great ...i just swapped my hoses to Goodrdige ...they do look great. Always had the speedbleeders just upgraded them to SS also. end result great brakes!! Clutch SS is still pending (without the SS bleeders) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.