Forum CEO HispanicSlammer Posted August 15, 2020 Forum CEO Share Posted August 15, 2020 Todays Featured Bike Guest September 2, 2011 640 views 4 comments Recent Popular topics Pillion seat lock help!apscurrah 7 hours ago Hi folks, the latch mechanism that unlocks the pillion seat has failed. Anyone had this happen and/or know how to get in there to release the seat? As far as I can tell the whole rear end is bolted to… 13 views 5 comments Help me price my 6th gen OEM side bags and mounting hardwarechuckfirment 6 hours ago I just pulled off my OEM bags and mounting hardware so I could put on a different top case to allow my nine year old to ride behind me. My hope was to sell the OEM stuff to offset costs on buying h… 44 views 3 comments What a Ride - US hwy12Grum 6 hours ago Big hello to all the American gang. A buddy of mine lives in Spokane and was returning home from a visit to Kansas City. Sent me a photo from somewhere along this magnificent Hwy US 12 (south o… 52 views 3 comments 1990 VFR750 Running/Starting ProblemsTheOneNewman Yesterday at 01:36 AM I have a 1990 VFR750 with some running problems, I'm looking for some help with this bike. First I'd like to add some backstory to this bike. I picked up this bike for a trade (rode for an hour… 61 views 7 comments Latest Classifieds FS: Yoshimura Half Header SystemYoshiHNS 6 hours ago Your chance to own a bit of unobtainium. Pretty much brand new. I've never mounted it. Uses the stock front down pipes IIRC. $500 + shipping. 4th Gen Adjustable rearsets Danmoto CBR900RRmonstar Thursday at 10:43 PM These are basically new. Never used just mounted. I bought them and they fit fine but at the highest level they were barely higher than stock foot position. I wanted more height so I ground some ma… WTB. Upper Fairing for 5th GenJeffInFranklinTN Wednesday at 02:22 PM I’m in need of an upper fairing. Must be OEM. I prefer a yellow one but does not have to be. No cracks or broken pieces please. Yes, I have been looking on eBay. Yellow is almost nonexistent.😬 T… WANTED VFR1200 OEM SHOCKjeremyr62 Tuesday at 09:53 PM Any condition will do. I really only want it for the spring so if the damping has gone AWOL, that's not a problem. I'm in UK/Ireland. 1990 - 1993 vfr 750 kickstand cover in redmcrwt644 Tuesday at 03:45 PM as the title states, kickstand cover in red, no broken tabs, with screws. I have this on vfrworld too, so the first to hit me up at 5four0327ninetyone hundred with $75, it's theirs NO IN… Recent Downloads 16-005-508/018 blend MattyIce May 18 This is my first post, but I have been reading the forum for years. I just got a PCV during the pandemic to kill some time and ran into a dead end in terms of maps for my bike: 1999 VFR800 with… 156 views 0 comments Scan of 6th Gen Grabrail Spacer for 3D Printing Calculon May 7 This is a two part file for a hard to find part for the OEM luggage kit of a 6th Gen VFR. The official Honda part numbers are, 08L41-MCW-80012 and 08L41-MCW-800123. The file provided is a 3D scan… 292 views 0 comments YSS Fork Spring Table Mohawk December 13, 2019 Having spent ages trying to find compatible fork springs for an older bike, I came accross this list on the YSS Thailand site & thought it would be a great cross reference for anyone looking for a … 651 views 2 comments Next VFRD Event SUMSUM 4 10 July 2018 - 13 July 2018didit Go Here - Read This: 0 comments VFRD Mission Statement For owners of the Honda Interceptor and related Honda V4 motorcycles, for the purpose of mutual help concerning safe riding, maintenance, and performance of their motorcycles. Contributions - VFRD is a member supported website with no commercial advertising Unsubscribe here Edit your settings Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.