Smiler Posted February 24, 2016 Share Posted February 24, 2016 Hi all I know this will sound like a stupid question but is anybody else struggling to get 2 full face helmets into the top box and close the lid? I can get them in side by side just fine but the lid will not close and if I get one in a place where the lid closes I cant get the second in! I had a 2007 VFR top box and it was really tight and you had to get the lids 'just right'. Am I missing the knack or just being a bit thick? Any help would be very welcome. Thanks Link to comment Share on other sites More sharing options...
Member Contributer Dutchy Posted February 24, 2016 Member Contributer Share Posted February 24, 2016 are they regular full face or flip ups? I found with my Vtec side case, the Schuberth C3 flip up "fits better" with the lid slighly ajar... Link to comment Share on other sites More sharing options...
Member Contributer fink Posted February 24, 2016 Member Contributer Share Posted February 24, 2016 Have no problem fitting 2 full face Arai lids in mine. mind you it is a 45l box and not the smaller 31l one Link to comment Share on other sites More sharing options...
Smiler Posted February 25, 2016 Author Share Posted February 25, 2016 Thanks for your responses. They are 2 regular full face helmets (1 Shoei Qwest ans 1 Shuberth). I have the 45l box. From your experience it looks like they should fit so I need to just find the knack! Link to comment Share on other sites More sharing options...
jhenley17 Posted May 1, 2016 Share Posted May 1, 2016 I'm not sure I'm looking at the parts right. What was the total cost for you guys for the mount and top case? Link to comment Share on other sites More sharing options...
Member Contributer fink Posted May 7, 2016 Member Contributer Share Posted May 7, 2016 We are in uk so prices irrelevant to you. http://www.honda.co.uk/content/dam/local/uk/brochures/motorcycles/Accessories/HUK%20MC%20HGA%20VFR800F%201115.pdf See p5 for 45l kit Link to comment Share on other sites More sharing options...
Member Contributer Nelix Posted May 7, 2016 Member Contributer Share Posted May 7, 2016 Even with a discount, I was over £500 for the top box and all the fittings. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.