Guest StevenBlanc Posted May 31, 2012 Share Posted May 31, 2012 Hi All Looking to track my vfr. Who sells rears sets for improved clearence? Steve Link to comment Share on other sites More sharing options...
Member Contributer karhawk Posted May 31, 2012 Member Contributer Share Posted May 31, 2012 Hi All Looking to track my vfr. Who sells rears sets for improved clearence? Steve I have been told that 99 and older Honda 900 RR brackets will fit VFR's then you may have more pedal options, that is if your referring to the main pedals and brackets and not the passenger pedals. Link to comment Share on other sites More sharing options...
Member Contributer kostritzer Posted May 31, 2012 Member Contributer Share Posted May 31, 2012 I have a brand new set meant for a 900RR on my 750 track bike project. PM me if you're interested. Link to comment Share on other sites More sharing options...
SEBSPEED Posted May 31, 2012 Share Posted May 31, 2012 Look on ebay for CBR900RR rearsets. Only downside is, you'll need to add a few spacers if you want to retain the standard shift pattern. I have a set (ebay chinese set) and they didn't break after installing and jumping on them. I'm no lightweight either... Link to comment Share on other sites More sharing options...
Member Contributer taglicious Posted June 1, 2012 Member Contributer Share Posted June 1, 2012 bolt pattern is the same spacing on those? ? Link to comment Share on other sites More sharing options...
SEBSPEED Posted June 1, 2012 Share Posted June 1, 2012 Yup, perfect fit. Link to comment Share on other sites More sharing options...
Member Contributer karhawk Posted June 1, 2012 Member Contributer Share Posted June 1, 2012 Look on ebay for CBR900RR rearsets. Only downside is, you'll need to add a few spacers if you want to retain the standard shift pattern. I have a set (ebay chinese set) and they didn't break after installing and jumping on them. I'm no lightweight either... where would you add the spacers? Where the shifter is attached? I'll be installing a set too Thanks . Link to comment Share on other sites More sharing options...
Guest StevenBlanc Posted June 1, 2012 Share Posted June 1, 2012 Great stuff, pm sent, thank you for the replys Link to comment Share on other sites More sharing options...
SEBSPEED Posted June 2, 2012 Share Posted June 2, 2012 Look on ebay for CBR900RR rearsets. Only downside is, you'll need to add a few spacers if you want to retain the standard shift pattern. I have a set (ebay chinese set) and they didn't break after installing and jumping on them. I'm no lightweight either... where would you add the spacers? Where the shifter is attached? I'll be installing a set too Thanks . You'll see when you bolt them up. On the shifter side, the rearset may contact the swingarm, so you add a few washers to give it clearance. I don't remember now what exactly I did w/ the linkage, I know I have to shorten the rod. Link to comment Share on other sites More sharing options...
Guest Posted December 6, 2012 Share Posted December 6, 2012 Hi All, I'm resurecting an old thread, and it's been a while since I've been on here, I'm building an RC30 replica based on a fourth gen 1997 VFR. I've seen some cheapy Chinese rearsets that look pretty good value, could anyone comment on whether they would fit, one set is for a CBR900RR 929 http://www.ebay.co.u...984.m1423.l2649 and another for 954 http://www.ebay.co.u...984.m1423.l2649 Any help would be appreciated! Link to comment Share on other sites More sharing options...
Joe Foe from Buffalo Posted December 7, 2012 Share Posted December 7, 2012 I may have a set in my spare parts like the ones in my pics. http://www.bikepics.com/members/joefoefrombuffalo/97vfr750/ Don't remember who made them. Came from Germany and was only able to get them threw a German VFR group purchase since the place that made them didn't make many and only when a group purchase made it worth the effort. Cost me a over $400. Make me a fair offer and I may be motivated go look for them. FYI I took them off cause the pegs don't fold up and when my bike was backed in to by a car and knocked it over my frame cracked....and just a minor scuff on the peg....so they are very strong.... Link to comment Share on other sites More sharing options...
SEBSPEED Posted December 8, 2012 Share Posted December 8, 2012 Hi All, I'm resurecting an old thread, and it's been a while since I've been on here, I'm building an RC30 replica based on a fourth gen 1997 VFR. I've seen some cheapy Chinese rearsets that look pretty good value, could anyone comment on whether they would fit, one set is for a CBR900RR 929 http://www.ebay.co.u...984.m1423.l2649 and another for 954 http://www.ebay.co.u...984.m1423.l2649 Any help would be appreciated! Those will not fit. The rearsets that will fit are from a CBR900RR, not the CBR929RR or the CBR954RR. It is confusing when searching, but that's just how it is. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.