Forum CEO HispanicSlammer Posted January 19, 2011 Forum CEO Share Posted January 19, 2011 To make a google map route resize the map to see your beginning point and right click on the map point you want to begin with then choose -directions from here- in the menu that pops up drag the map to your destination then again resize to find it better and right click again choose -directions to here- resize the map to see the entire route then right click on the point of the map where you want it to be centered and right click -center map here- click -link- at the top righthand side of the map find the code in the box labled -Paste link in email or IM- highlight the code in the box then right click with you mouse and copy the entire code Method One for adding code to post click other styles then chose embed google map choose google map embed paste the map code into the box some browsers will error out if that is the case then try method two Method Two in the post screen box left click and choose paste paste the map code into the post screen text box then put map tags at the front of the code and at the end of the code Map tags will have an opening tag and a closing tag this is the raw map code pasted into the post http://maps.google.com/maps?f=d&source=s_d&saddr=Colorado+Springs,+CO+80906&daddr=17+West+Palmer+Street,+Franklin,+NC+28734-3046+(Franklin+Motel)&hl=en&geocode=FSn9TwIdiS3B-Skjsyf5gFwThzG4dfnOaMZjJw%3BFR3PGAIdaqUH-yHJpii3nA0k3w&mra=ls&sll=39.300299,-95.712891&sspn=29.993673,86.220703&ie=UTF8&ll=36.385913,-93.515625&spn=15.646283,43.110352&z=5 this the same code with the map tags added [map]http://maps.google.com/maps?f=d&source=s_d&saddr=Colorado+Springs,+CO+80906&daddr=17+West+Palmer+Street,+Franklin,+NC+28734-3046+(Franklin+Motel)&hl=en&geocode=FSn9TwIdiS3B-Skjsyf5gFwThzG4dfnOaMZjJw%3BFR3PGAIdaqUH-yHJpii3nA0k3w&mra=ls&sll=39.300299,-95.712891&sspn=29.993673,86.220703&ie=UTF8&ll=36.385913,-93.515625&spn=15.646283,43.110352&z=5[/map] [map] - opening tag[/map] - closing tag this is the result Full Size Quote Link to comment Share on other sites More sharing options...
Guest danmurphymn Posted January 19, 2011 Share Posted January 19, 2011 AWESOME!! Thanks. I've been trying to figure out how to do this for a while! Quote Link to comment Share on other sites More sharing options...
Forum CEO HispanicSlammer Posted January 19, 2011 Author Forum CEO Share Posted January 19, 2011 google maps take up alot of cpu cycles so dont post more then 2 per page - they will slow down a page rather quickly, if you have several maps it best just to put links instead of embedding them all. Quote Link to comment Share on other sites More sharing options...
Member Contributer Ryanme17 Posted May 15, 2011 Member Contributer Share Posted May 15, 2011 Help! When I try this, all I get is a picture of a screenshot of the top of the VFRD page. What am I possibly doing wrong that I can't follow the easiest directions ever? Quote Link to comment Share on other sites More sharing options...
choco Posted July 22, 2013 Share Posted July 22, 2013 Hey Miguel, As I mentioned to you a long time ago, I'm computer challenged at times. I see you've posted easy to follow instructions, but I still failed. I discovered there is a NEW Google Maps format. I clicked on directions and they only supply two entries, I don't see how to "add a destination." I am organizing the 2014 PNW "Oregon Trail" event and would like to post each day's ride with a map and discussion of the length, features and destinations, etc. I'm going to change it up this year. I just came back from an Oregon ride, 1,300 miles and much of it was to scout out the 2014 trip. It looks to be a doozy. I found the best road ever, 140 miles of VFR Nirvana, from Heppner, Ore, to Ukiah, to Sumpter and then into Baker City. Here's how it's looking. First night in Hood River, Second night in Baker City third and fourth nights in Bend. The roads and towns will more than meet expectations, weather providing. Looking at mid to late July, as the days are long and the weather has been historically good. Anyway, I need to figure out how to post maps, have a look at the new Google Maps format and see if it still applies to your instructions and I'll try again. BTW I find Bing maps works better than Google at times, not sure why, but what's the process for imbedding Bing maps? Lee Quote Link to comment Share on other sites More sharing options...
Member Contributer vanion2 Posted July 22, 2013 Member Contributer Share Posted July 22, 2013 The way I do it for google maps is the same but less steps. Just make your map as HS describes, copy the link, then paste it to your post and add the map tags. Keep in mind sometimes Google maps misbehave and the link you end up pasting doesn't work. When that happens I try resizing the map and copying the new link into the map tags. [map] [/map] Actual example: https://maps.google.com/maps/ms?msid=212604679972371715183.0004d99cdeb98ec63ffcc&msa=0 Now type the map tags on each end as shown above: Full Size Quote Link to comment Share on other sites More sharing options...
choco Posted July 23, 2013 Share Posted July 23, 2013 Ok, I try it later. Quote Link to comment Share on other sites More sharing options...
Forum CEO HispanicSlammer Posted July 28, 2013 Author Forum CEO Share Posted July 28, 2013 OHH the Jemez loop! Good one! Choco - everything good? The way I do it for google maps is the same but less steps. Just make your map as HS describes, copy the link, then paste it to your post and add the map tags. Keep in mind sometimes Google maps misbehave and the link you end up pasting doesn't work. When that happens I try resizing the map and copying the new link into the map tags. [map] [/map] Quote Link to comment Share on other sites More sharing options...
Member Contributer Cogswell Posted October 3, 2015 Member Contributer Share Posted October 3, 2015 Has anyone got an update on embedding a map in a post? Since 2013, Google Maps has changed. and it looks as though the process on the forum has changed slightly, too. I pulled up a Google map, clicked on "Share or Embed", selected "Embed" and copied the url code to my clipboard. Then on this post, I selected the 3rd icon from the upper left, the green colored one that when you click it brings up a dialog box that says "Special BBC Code". In the dropdown I selected "Google Map Embed" and when the next box popped up I copied the code in to the box that says "Insert Custom Google Map code here" and clicked "OK". Once that's complete, I see the map showing perfectly prior to posting. Once posted though, it appears to take a screen shot in place of the Google map as you see below. What . . . am I doing wrong? [map][/map] Quote Link to comment Share on other sites More sharing options...
Forum CEO HispanicSlammer Posted October 9, 2015 Author Forum CEO Share Posted October 9, 2015 cannot currently embed google maps, requires iframes in html which are easily manipulated for evil...the option is not available at the moment. Quote Link to comment Share on other sites More sharing options...
Member Contributer Cogswell Posted October 9, 2015 Member Contributer Share Posted October 9, 2015 Hackers - ruining it for everyone . . . . Thanks for the clarification. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.