veeefour

Guys, I'm not checking this that often anymore. Please feel free to email me directly: veeefour.ecc@gmail.com

As noted - no changes besides new colors. Everything will fit.

Tire balancing cost 15 bucks and it's always right - not worth the hassle.

Blinking ABS indicator means low voltage problem - usually a weak battery that needs to be replaced.

New switch release date: end of April/beginning of May. We are going to take some time off for the most part of April - last orders until the end of the next week. For those 2 weeks left: free push-button switch upgrade for new customers.

New switch version around the corner that will have built-in LED's in push-buttons.Some wanted a simplified version with even smaller controller - so here you go Key features:-ECC will always stay ON - no more ON/OFF button.-middle MEMORY push-buton with green LED will inform that ECC is on and ready to go-upper SET/+ push-button with red LED will illuminate when the ECC is engaged.-lower RES/- push-button with STATUS red LED - it will indicate few things like: brake applied, clutch applied, pressed button, faulty conditions etc.

You can - been using this method for yonks... I have a HDS pocket - it's virtually useless.

No need for diagnostic tool neither to visit the dealer - MIL light is all you need.

If it stays on you need a diagnostic connector - it's a jumper so you can use a paper clip or something similar. Second pics shows how to clear the codes:

@Skids VFR1200 will blink out the code only under specific conditions. See below:

Tylko jak rozlozysz stopke boczna ;)

I used this one: https://www.ebay.de/itm/Y-Adapter-51mm-zu-45mm-Auspuff-Rohr-Edelstahlrohr-Abgasrohr-V2A/172574201027?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D49921%26meid%3Ddf142d2951624cfebe6a14934f71f8d6%26pid%3D100013%26rk%3D1%26rkt%3D12%26sd%3D172574201027%26itm%3D172574201027&_trksid=p2047675.c100013.m1986

A happy new year to your all! I'm back and working full time again. All orders in January 5% off!

PLEASE NOTE: We will be closed from December 12th 2017 to January 8th 2018.