Hi folks, first off I'd like to apologise if this has been covered before. Looking through the web over the past 2 nights I've found 2 answers to my question and I'm just not sure which is right.
I'm currently building a custom out of a very tired 4th gen 750. Which will include a usd front end. . But One thing I'm having trouble with is the lower triple clamp, I intend on buying a cbr929rr lower, but I'm not sure if the fork clamp diameter is 54 or 53. I've got a set of zx10r forks which are 54mm. At the moment I'm finding conflicting info on the website, so hopefully someone here can put me right!
Question
jonut
Hi folks, first off I'd like to apologise if this has been covered before. Looking through the web over the past 2 nights I've found 2 answers to my question and I'm just not sure which is right.
I'm currently building a custom out of a very tired 4th gen 750. Which will include a usd front end. . But One thing I'm having trouble with is the lower triple clamp, I intend on buying a cbr929rr lower, but I'm not sure if the fork clamp diameter is 54 or 53. I've got a set of zx10r forks which are 54mm. At the moment I'm finding conflicting info on the website, so hopefully someone here can put me right!
Cheers guys
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.