Spacer For Vfr Swingarm On Cbr900rr

[SAFE-T]

Going to help a friend put a VFR750 swingarm on his CBR900RR this winter - I thought the guy (Jeff) at TireQuik made spacers for this, but I can't seem to get an answer out of him.

Anyone else out there help me find someone/somewhere that either makes these or has the dimensions for them? Apparently it only needs one, but I don't know and I would like this to be as straightforward as possible (famous last words, I know...)

[Veefer800Canuck]

Rick, the information is on Jeff's site, bit it's hidden, and there's no site menu.

The direct URL to the page is here: http://www.tireqwik.com/sssa/menu.html

In case it disappears, here is the spacer quote:

This is the Spacer on the right side. It's 20mm long by 25mm Diameter and a 20mm hole for the pivot.

[SEBSPEED]

And if that wasn't enough, you can poke around over at customfighters.com!

[SAFE-T]

The information is on Jeff's site, but it's hidden.

I knew I had seen it there before. Thanks :schla15: