ron_al
Member Contributer-
Posts
190 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Profiles
Gallery
Blogs
Downloads
Events
Everything posted by ron_al
-
From the album: Givi Mounts
Shows the backside/bottom of the left Givi Wingrack on a 4th gen 94. Shows the lower mounting bracket (which extends to the passenger footpeg bracket), and the rear attachment point of that bracket (in the middle of the bottom of the Wingrack). The lower mounting bracket also attaches at the front of the wingrack, but that is obscured in this pic. (It is blocked from view by the mounting arm that extends horizontally out from the upper/rear mounting bracket.) -
From the album: Givi Mounts
Shows the upper/rear mounting bracket for the left-side of a Givi Wingrack on a 4th gen 94. Shows one of the two arms from this bracket, the upper/rear arm from the bracket. The front/lower arm from this same bracket can also be seen in this pic. The lower mounting bracket (extending to the passenger footpeg bracket) can also be seen at the very bottom of the pic. -
From the album: Givi Mounts
Shows the upper/rear mounting bracket for the left-side of a Givi Wingrack on a 4th gen 94. Shows that this bracket has two arms: one in the front, and one at the rear. The lower mounting bracket (extending to the passenger footpeg bracket) can also be seen at the bottom of the pic. -
From the album: Givi Mounts
Shows left-side mounting bracket for Givi Wingrack on a 4th gen 94. Shows the backside of the left Wingrack, showing one of the attachment points for the upper/rear mounting bracket. (The upper/rear mounting bracket has 2 attachment arms; this is the first/front-most of the two.) -
From the album: Givi Mounts
Shows left-side mounting bracket for Givi Wingrack on a 4th gen 94. Lower mounting bracket can be seen, with both attachment points. Part of the upper mounting bracket can also be seen (the first/front mounting arm, attaching to the bolt closest to the camera). -
From the album: Givi Mounts
Shows left side of wingrack on 4th gen 94. Lower mounting bracket attaches in 2 points: uncovered center bolt at bottom of wingrack, and plastic-covered bolt at lower, front of wingrack (left of wingrack, as seen in this pic) - NOT the sidecase mounting stud, and NOT the rubber mounting pad above the bolt. Upper mounting bracket has two arms. The first/front mounting arm (arm under the left-side of wingrack, as seen in this pic) attaches to the uncovered bolt on the front diagonal of the wingrack. The second/rear mounting arm (arm under the right-side of the wingrack, as seen in this pic) attaches in two places: plastic covered bolt near the top center of wingrack (above the "ON" in the smaller "MONOKEY SYSTEM" forged into the wingrack), and one of the two rear mounting bolts. -
From the album: Givi Mounts
Left side mount of Givi Wingrack on 4th gen 94. Shows mounting point on passenger footpeg bracket. -
From the album: Givi Mounts
Left side mount of Givi Wingrack on 4th gen 94. Shows rear attachment point for mounting rail under tail bodywork. -
From the album: Givi Mounts
Left side mount of Givi Wingrack on 4th gen 94. Shows lower mounting bracket for Wingrack. -
From the album: Givi Mounts
Right side mount of Givi Wingrack on 4th gen 94. Shows mounting point on passenger footpeg bracket. -
From the album: Givi Mounts
Right side mount of Givi Wingrack on 4th gen 94. Shows both wingrack mounting points. -
From the album: Givi Mounts
Right side mount of Givi Wingrack on 4th gen 94. Shows upper wingrack mounting point. -
From the album: Givi Mounts
Right side mount of Givi Wingrack on 4th gen 94. Shows front attachment point for mounting rail under tail bodywork. -
From the album: Givi Mounts
Right side mount of Givi Wingrack on 4th gen 94. Shows rear attachment point for mounting rail under tail bodywork. -
Even Better Pazzo lookalike levers now available
ron_al replied to SEBSPEED's topic in Modifications
I know this is entirely :offtopic: Whirlpool bought out Maytag in 2006; I would not be surprised if both of those models were made in the same factory (just like Ford & Mercury). However, I would note that they do make at least some of their appliances in the US (or, at least, they were still doing so recently). (I have a relative who worked for Maytag up until the 2006 acquisitions.) Ron -
-
Kev, That is just super sharp! Nice job integrating the gen6 bags on the gen4 tail! Ron
-
-
-
A 95 should be a 4th gen - same as the 94 that StelvioOrBust posted here as a naked bike (although I think that he's using the windshield from a CBR600F4i...). Ron
-
It's not the same tent, but there is a $100 version on sale on REI's outlet site here. (I have no experience with this tent, I just did a quick search of REI's Outlet site.) Ron
-
I'll second Mark5948's recommendation for Eureka tents. I use a Eureka Backcountry 2 tent (here at CampMor) when I am solo-motorcycle camping. I've had it for several years and am very happy with it. It packs down considerably smaller than most other tents I've seen - great for carrying on the bike without taking up much room. Setup is a piece of cake. (Emphasis added. -Ron) I can quickly & easily put this tent up even after a long and tiring day in the saddle. A "two man" tent is typically cozy for two people, but it's great for a solo motorcyclist WITH GEAR. Or, when the wife & I are car camping, it has enough room for two sleeping bags, but not much else. Note that this tent does not appear to be made anymore - it's not listed at Eureka's website anymore. I also use a Eureka Timberline 4 tent (here) for two-up motorcycle camping trips A "four man" tent gives us plenty of room for our sleeping bags AND our riding gear. But, when packed down, it is still 24" long (due to the length of the pole segments). The Timberline 2 is still made & available, so it's smaller - but the pole segments are just as long. Prior to acquiring both of these tents, we used a several cheaper tents (from Walmart, etc.) with fiberglass poles. After numerous pole failures with each of those tents, we realized that perhaps spending a little bit more for a higher quality tent (the 2 Eureka's listed above, both of which use aluminum poles) would provide more durability. And it has. With those two endorsements out of the way, there are other tents available - Aerostich lists several, and Chase Harper offers a pole-free tent (for which you can use your bike as a tie-down point). Good luck, however you decide. Ron
-
From the album: Rons Pix
© ©vfdiscussion.com
-
From the album: Rons Pix
© ©vfdiscussion.com
-
From the album: Rons Pix
© ©vfdiscussion.com