Leaderboard

Yup, Tire sponsor, haha Not just the Pirelli and Shoei decals but the Incline Sports as well. Paint looks great too. I will look for this one on eBay soon.

no point using a 10 gauge lug really...the stator wires are 14 gauge. The real key seems to be getting a good connection from wire to connector, and then between the connectors. I have a stator hardwire kit that works great if you want to be able to remove them, or you can do as suggested and just bolt them together...be careful to insulate the bolt very well, as you don't want it vibrating and rubbing through. I also prefer solder, although the purist claim vibration can cause the solder joint to fail. so far my solder joints lasted longer than the crimp connections, so I will stick with that. The key to soldering is lots of heat in a concentrated space for the shortest time possible. Naturally too much heat will leave the connector hot for a long time, so don't overdo it. I use a fairly big Weller gun on high, it takes about 10 seconds from start to finish, and the insulation should never melt away or look burned. Dual wall heat shrink is also the best thing ever!