Member Contributer mello dude Posted November 1, 2014 Member Contributer Share Posted November 1, 2014 Finally been able to test that. On idle, the 3 result were almost the same (±.1) and at 4000 rpm, same things. So I supposed my stator is fine. I've also received my Rick's r/r which is now installed. I found it in a dealer in Ontario for way less and it is still brand new! :D Just need to do a test ride to know the result I ran across simular with another member recently -- So is the connector apart? Test 3 makes zero sense. Should be 15-20VAC around idle and climb to at least 50ish VAC and more at 5k. Exact # isnt important, as long as it goes upward is the idea. Link to comment Share on other sites More sharing options...
ShadowJP88 Posted November 1, 2014 Author Share Posted November 1, 2014 Finally been able to test that. On idle, the 3 result were almost the same (±.1) and at 4000 rpm, same things. So I supposed my stator is fine. I've also received my Rick's r/r which is now installed. I found it in a dealer in Ontario for way less and it is still brand new! :D Just need to do a test ride to know the result I ran across simular with another member recently -- So is the connector apart? Test 3 makes zero sense. Should be 15-20VAC around idle and climb to at least 50ish VAC and more at 5k. Exact # isnt important, as long as it goes upward is the idea. If I remeber well, at idle, around 22.5 and at 4000rpm, more than 40 but both result where near. Sorry, I did not understand what you mean by "is the connector apart", I'm french and my english is not that great.. :P Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.