gloryracing Posted July 29, 2013 Author Share Posted July 29, 2013 Got the 1.2's installed and raised the 5 wt fluid level from 160mm to 145mm. Rode today and it is definitely much better. Is it as good as it can possibly be ...probably not, but for $93 it is sweet! I don't have a digital camera to post a pic, but the spacer is simply a piece of steel tubing cut to the necessary length. Attempted to use pvc pipe but it was to thick and wouldn't clear the internals of the cap. The stock spacer was just a thin piece of plastic! Link to comment Share on other sites More sharing options...
Member Contributer 2thdr Posted July 29, 2013 Member Contributer Share Posted July 29, 2013 Amazing that the thin plastic spacer didn't break apart when your forks were bottoming out! Sent from my DROID RAZR HD using Tapatalk 2 Link to comment Share on other sites More sharing options...
gloryracing Posted August 2, 2013 Author Share Posted August 2, 2013 Forks stiffened and serviced, Penske added, new tires front and rear, oil/filter change, calipers cleaned, brake/clutch fluid flushed and shorty levers added. Kinda anxious for a ride! Link to comment Share on other sites More sharing options...
Member Contributer Yokel Posted August 2, 2013 Member Contributer Share Posted August 2, 2013 Forks stiffened and serviced, Penske added, new tires front and rear, oil/filter change, calipers cleaned, brake/clutch fluid flushed and shorty levers added. Kinda anxious for a ride! New tires? You mean you are NOT riding on cords? ;) Link to comment Share on other sites More sharing options...
gloryracing Posted August 2, 2013 Author Share Posted August 2, 2013 Not just yet. Patience grasshopper! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.