Member Contributer tsmitty Posted February 4 Member Contributer Share Posted February 4 Hello, I've been putting together an 86 700F for a while now and have come to a point in the build that scares the hell out of me. I need to wrap my head around the idea of repairing or respraying the two tone paint on my fuel tank then applying the trim stripe with the "Honda" wings. The biggest problem is the blue/white color transition on the tank as it sits now is off location in the front; the blue will be showing above and below the decal. Below are three pics Captain80 send me for reference, then a series of pictures of my bike and the PO's carnage. So, I'm thinking the "big" picture is Paint repair, apply decal and then clear coat. Its all the "little" pictures that are unclear and frightening me. I have very little paint experience. The fuel tank is not original paint; I think it was painted with the aftermarket front cowl and those graphics are replaced as well and their placement is probably less than stellar. Any thoughts? The stripe I have is from a CB Decals set and have a Left and Right side with the wings incorporated. Thanks! Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 4 Member Contributer Share Posted February 4 I see two options. Best fit it to just cover the blue. It will be "off" a little to the cowl, obviously. Maybe get some red tape and see how off it really looks. You last photo... Very off. Scuff and repaint the white in the correct configuration. Apply graphics. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 4 Author Member Contributer Share Posted February 4 I think option 2 is the way How well will the white cover the blue? Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 5 Author Member Contributer Share Posted February 5 Some more playing around with masking tape. I'll get some white and red vinyl tape. Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 5 Member Contributer Share Posted February 5 Ouch. I see some white paint in your future. The good news... single stage solid white is usually the easiest to shoot and have look good. Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 5 Author Member Contributer Share Posted February 5 What is "single stage" and are you talking shaker can paint? Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 5 Author Member Contributer Share Posted February 5 Does the masking look right to you?! That blue is so far off! Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 5 Member Contributer Share Posted February 5 22 minutes ago, tsmitty said: What is "single stage" and are you talking shaker can paint? Paints that don't require a multiple stages to get the color right. Like a colored base coat and/or a special top coat, like a very translucent pearl. Sold white, no pearl or metallic, is pretty easy to shoot, and hides flaws and contamination really good. Your tape lines look pretty on. I'll compare a straight side look on my 86, but Honda usually has it's stripes configured for straight from the side. Look for a Duplicolor non-metallic white in a can to match up. They offer quite a few. I've got one I am gonna try for that white fairly soon. Not sure which one I picked out (will verify), but GM Arctic White is supposed to be pretty damn close to Shasta White. Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 5 Member Contributer Share Posted February 5 Duplicolor BGM0153 Perfect Match Automotive Paint, GM Arctic White, 8 Oz Aerosol Can Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 5 Author Member Contributer Share Posted February 5 Lot of questions Captain and some sporadic. ok, i mask everything off scuff up the white, Do I prime the blue areas that will be painted as well as the petcock area? After all that, after pealing the masking away, that ridge we just created between the blue and white paint does that have to be made smooth again? Then apply the decal then clear everything? Blue, decal, white? Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 6 Member Contributer Share Posted February 6 1 hour ago, tsmitty said: Does the masking look right to you?! That blue is so far off! Actually... hold on! You have to standing above for the lines to match. All original paint and graphics. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 6 Member Contributer Share Posted February 6 If I run a string along the front seam groove... The blue / white transitions are this far apart... 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 6 Author Member Contributer Share Posted February 6 Nice! Good one! I'm in no hurry with this one Captain. How about ref. pic of wing tips in relation to tank cap please. Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 6 Author Member Contributer Share Posted February 6 25 minutes ago, Captain 80s said: The blue / white transitions are this far apart... I can't think of a way this can't work, perfect! And the red stripe probably overhangs that by an 1/8 or so each side. Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 6 Member Contributer Share Posted February 6 I'm on the bike trainer watching Supercross right now. I happen to be in a good vantage point. Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 6 Member Contributer Share Posted February 6 4 minutes ago, tsmitty said: I can't think of a way this can't work, perfect! And the red stripe probably overhangs that by an 1/8 or so each side. The lower edge of the red stripe is pretty much riding the transition line, barely over lapping. Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 6 Author Member Contributer Share Posted February 6 haha Thanks Man those pics are great! I know your not up this early stressing over my bike...what gives !!!UPS comes here today!!!! Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 6 Member Contributer Share Posted February 6 3 minutes ago, tsmitty said: haha Thanks Man those pics are great! I know your not up this early stressing over my bike...what gives Yeah, mentioned earlier... Riding the bicycle watching motorcycle racing. Have to get my cardio and weights done in the morning, or it doesn't happen. Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 6 Member Contributer Share Posted February 6 2 Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 7 Author Member Contributer Share Posted February 7 Captain your "string theory" looks pretty bullet proof; I marked center of the string, taped it to the tank, put white electrical tape to the string marks and literally stepped back and took these pics. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 15 Member Contributer Share Posted February 15 On 2/5/2024 at 2:35 PM, Captain 80s said: Duplicolor BGM0153 Perfect Match Automotive Paint, GM Arctic White, 8 Oz Aerosol Can Well... I'll know about a match fairly soon. Probably shoot the VFR fender on the VF1000R. If it's not a perfect match, it won't really matter. It's not sharing a panel seam with something else that is Shasta White. Maybe I'll do a small spray out on something when I'm shooting some 1992 VFR stuff hopefully this weekend. Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 15 Author Member Contributer Share Posted February 15 (edited) Let me know. In my case, do I need a primer over everything (areas to be painted white)or just the petcock area? Will this cover the blue areas that will need painted white? so not ready to pull the trigger yet... When the decal gets applied and clear coated, will the entire tank be getting sprayed as well? So the whole tank gets scuffed up? Edited February 15 by tsmitty Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 15 Member Contributer Share Posted February 15 I'm not a pro painter, but a pretty damn decent self taught. I would prob scuff the whole tank and and sand-prime-sand/scuff just the area under the petcock. Mask and paint from the new line down and re-scuff the new paint and sand the masking line down. Lay down your graphics and 2K clear the whole tank. 1 Quote Link to comment Share on other sites More sharing options...
Member Contributer tsmitty Posted February 15 Author Member Contributer Share Posted February 15 4 minutes ago, Captain 80s said: Lay down your graphics and 2K clear the whole tank. Graphics will stick to the scuffed tank? What is 2K? Quote Link to comment Share on other sites More sharing options...
Member Contributer Captain 80s Posted February 15 Member Contributer Share Posted February 15 9 minutes ago, tsmitty said: Graphics will stick to the scuffed tank? What is 2K? Yes. Gotta have something that can survive a fuel spill on the gas tank and graphics. This a true 2 part clear that you "activate" by punching a button to let the 2 parts mix. You have about 24 hours to use it after activating, but I have used a leftover can a few days later on small brackets. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.