n3n3

How I used to test a 9 volt battery

I never new the ECU was bad from the beginning I’m trying to trouble shoot and no just be a parts changer. Grumpy Grum is a joke had to tell but if we were face to face you would know because I would be smiling. I think I might be a little color blind to be honest that’s why I posted pictures. Thanks for your help now get some sleep. Thanks again

Hi n3n3, Thank you for your donation of --. We look forward to improving the forums with your donation. Thanks VFRDiscussion

Whatever you want to call this color. I will go with Grumpy Grum says he truly is the expert along with Preston. I have a ECT on order. Thank guys will keep everyone updated hopefully this fixes my issue. With the sensor plugged in I get 30.1 ohms key on or off doesn’t change. To be clear that just the sensor plugged in and continuity to the pin before it goes into the instrument panel

Canon plug to the ECT

I have continuity from the ECT wire

Good morning and thank you for your continued support. Yes I have continuity on the yellow brick Road.

item 6 Yes I have already stated I have continuity in all 3 wires item 8 You are incorrect the wire is not green/blue it is blue with gray dashes item 9 I don't see that one Thanks for your help maybe it's just how you respond but you sound very condescending no reason for that. We are all fellow riders and Im trying to learn. Thanks again

Ok, so this is the correct wire diagram. Thanks thought I was going crazy!

I was told no and it doesn't appear to have been changed its a 2000 VFR800 USA model

2nd picture 4th wire from the right yellow with blue stripe and 3rd picture wire Green with red stripe

Ok, it was a long day. To make things clear the ECT does have 3 wires but not the same color as the wire diagram I confirmed this by checking each wire for continuity point to point. I took a picture at the ECT this morning after it was reinstalled so you only see 2 out of the 3 wires. BLUE 10P wire is blue with gray dashes continuity to the instrument panel. I don't remember if the Green with a red line or the Yellow with the blue line had the 5 volts ECU G/R good continuity Y/B good continuity

BLUE 10P wire is blue with gray dashes good continuity ECU G/Y good continuity Y/B good continuity Getting 5 volts

Yes, it has 3 wires to the ECT blue with gray dashes to the 10 blue plug to the instrument panel 3rd pin from the left. The other two are

The fan comes on when the engine runs for about 7 minutes just sitting in the driveway.

All done front and rear!!

I replaced the ECU for the fuel pump issues looked like the last guy jumped the wrong wires. Now I have a water temp that always flashes 270. According to the wiring diagram I need to find the green wire with the blue dashes on it and for the love of God I can find it up by the instrument cluster

Ok, the fuel pump is up and working!!! thanks to all

I would tap that stud and get a nut on it. Looks like the tank needs to be cleaned also lots of rust. Good luck you can do it!

I was told the bike sat for at least five years. Judging by the clutch reservoir I would guess and say the fluid was never changed

While waiting on my ECU I started working on my rear brakes that didn't work. I tried everything peddle would get hard but the brake pads never moved. I finally took the brake lines off the rear caliper brake peddle would still pump up. Long story short both brake lines two inches before going into the caliper the fluid had crystallized. I used .31 safety wire and after about 30 minutes got both lines cleared and then pumped a bunch of brake fluid through them before reinstalling the calipers thank good they work great now

Okay thanks what should I be looking for with the started? Thanks

Dude I didn't know the man from the forum he posted the motorcycle on the Facebook marketplace. I didn't realize that was his post. I saw it then when I looked closer then noticed his garage. He didn't know what was wrong and said he bought another ECU and it fried. I have learned to do my due diligence. I have an ECU on the way and should have it on Wednesday. The guy is cool so no worries. I found a missing relay in the headlight area and installed a new one still no fix.

WOW! Calm the fuck down I just saw that posted so that's why I stopped. Thank you for all the help no reason to get all pissed off.