RapidBikeUSA

You need to accumulate at least 200 miles on the clock and look at the correction map, if you are not seeing adjustments at the top of the range +15 or -15 then leave it alone it is best that way, however if you do see +15 and -15 accumulating in different areas then "add correction" and forget about it . PLEASE NOTE: THE CORRECTION MAP IS THE SNAP SHOT OF YOUR LAST RIDE , if the conditions were less than ideal such as very hot and humid day, a lot of stop and go traffic, hot running engine and such, in these conditions even after looking at the correction map and you see some odd numbers, DO NOT PANIC :) RB will correct and constantly be correcting all the time so let it correct itself. And you can always post your screen shots of your auto adaptivity screen here, so we can talk about it as well.... Y.T.

YES it is! I can help you guys out with the QS purchase as well, $295 + Shipping and since installation will vary from one rear set to another , I will no include a rod or you can tell me general measurements of the rod you need and I can include it so you can trim it for your liking..

yOU ARE CORRECT! what I meant was when you do a copy and paste and highlight entire mapping the values may not go in to the same exact cell in the RB module you you would have to do it cell by cell also sometimes the resolution is different between the two such as tps and rpm increments, that is all.....

without getting into politics here :) not everyones Z-E-R-O map is a zero map. So I am not sure if the numbers would be identical between RB and PC

PLEASE DON"T use PC3 or PCV cell values in RB cells as they may not correspond to same exact value. And yes USB will power up the unit no need to have the key on to make/view the software after retrieving it. Do you have the right software installed to tune the module? Did you download the master software with your serial number from the instructions? Are you running windows 8 ? if so please let me know I will e-mail you a usb driver, the problem is simply your PC doesn't have the driver to connect to RB module.... PLEASE keep it in mind that if RB is not installed properly , you bike won't run.......

I hope you're not saying that even if we paid for the harness in good faith (I did), we won't get the harness unless we spend the additional $ for the module? When I pay for something, I kind of expect to get it ... ACE No not it all, we would hope that you would buy the module otherwise why would you purchase something you can't use without the module? if you wish not to purchase the module please request via e-mail that you would just like to get the wiring mailed out to you and no problem at all , I would put your wiring in the mail today. our e-mail is info@rapidbike.us , please let me know I will be more than happy to mail out your harness by itself . Thank you. and I am sorry if my previous post had caused a misunderstanding.and our phone # 407-277-5557 if you need to call us. Yaman Ah, yes just a misunderstanding then. I do want the cable ahead of time & will email to that effect. My intent is to get the module as well (yes, the cable is not of much use w/o) but this allows me to layout/install the cabling & have it ready for when the budget allows purchase of the module. Thx for clearing this up, I'm a bit slow I guess ... ACE NO PROBLEM. Just let us know when you are ready, we always have plenty of the modules!!! and your price will stay the same since you have already purchased the harness. Y.T.

According to instructions, it looks very easy .

I hope you're not saying that even if we paid for the harness in good faith (I did), we won't get the harness unless we spend the additional $ for the module? When I pay for something, I kind of expect to get it ... ACE No not it all, we would hope that you would buy the module otherwise why would you purchase something you can't use without the module? if you wish not to purchase the module please request via e-mail that you would just like to get the wiring mailed out to you and no problem at all , I would put your wiring in the mail today. our e-mail is info@rapidbike.us , please let me know I will be more than happy to mail out your harness by itself . Thank you. and I am sorry if my previous post had caused a misunderstanding.and our phone # 407-277-5557 if you need to call us. Yaman

I think 20 people bought the harnesses and currently 10 have paid for the Evo or Race module... Thanks kinda sitting on the fence ! Yes it really is but, we can't do anything about it so..... I will be packing all 9 today +1 is Jonathan's we don't ned to ship his.

We received the harnesses today late afternoon, I will be dedicating my all day to program and ship out all 10 systems, Please remember if you have only purchased the harness, nothing will be shipped out without the purchase of the EVO or Racing module ( we still need 10 people to complete the purchase) Thank you. Y.T.

DHL TRACKING # 7373212523

Everything shipped out today (from Italy), just for the heck of it , I will post the DHL tracking number here later on...

UPDATE: We have sold total of 20 harnesses which was the goal for the initial project, I would like to thank everyone of you FOR SUPPORTING THE PROJECT. I have now created a Racing and EVO systems on the www.rapidbike.us so you can purchase the entire system. ALSO FOR THOSE WHO PURCHASED THE WIRING HARNESS BUT HAS NOT YET PURCHASED THE MODULE YET can still purchase the EVO or RACING modules individually. And the initial discount has been discontinued but the shipment for the VFR800 systems are free within the USA and we now have a discount code that we can e-mail you upon request for purchasing the whole system, forum members only . Thank you very much. http://rapidbike.us/products/rb-racing-honda-vfr800-02-09 http://rapidbike.us/products/rb-evo-honda-vfr800-02-09

If you have the software and the usb cable , It should work, We started in RapidBike Distributorship here in the states at the end of May ,2014 so any prior products like RB 1,2,3 we are not familiar with however if there is a question, we'll do our best to find an answer for you...