RapidBikeUSA

You need to accumulate at least 200 miles on the clock and look at the correction map, if you are not seeing adjustments at the top of the range +15 or -15 then leave it alone it is best that way, however if you do see +15 and -15 accumulating in different areas then "add correction" and forget about it . PLEASE NOTE: THE CORRECTION MAP IS THE SNAP SHOT OF YOUR LAST RIDE , if the conditions were less than ideal such as very hot and humid day, a lot of stop and go traffic, hot running engine and such, in these conditions even after looking at the correction map and you see some odd numbers, DO NOT PANIC :) RB will correct and constantly be correcting all the time so let it correct itself. And you can always post your screen shots of your auto adaptivity screen here, so we can talk about it as well.... Y.T.

YES it is! I can help you guys out with the QS purchase as well, $295 + Shipping and since installation will vary from one rear set to another , I will no include a rod or you can tell me general measurements of the rod you need and I can include it so you can trim it for your liking..

yOU ARE CORRECT! what I meant was when you do a copy and paste and highlight entire mapping the values may not go in to the same exact cell in the RB module you you would have to do it cell by cell also sometimes the resolution is different between the two such as tps and rpm increments, that is all.....

without getting into politics here :) not everyones Z-E-R-O map is a zero map. So I am not sure if the numbers would be identical between RB and PC

PLEASE DON"T use PC3 or PCV cell values in RB cells as they may not correspond to same exact value. And yes USB will power up the unit no need to have the key on to make/view the software after retrieving it. Do you have the right software installed to tune the module? Did you download the master software with your serial number from the instructions? Are you running windows 8 ? if so please let me know I will e-mail you a usb driver, the problem is simply your PC doesn't have the driver to connect to RB module.... PLEASE keep it in mind that if RB is not installed properly , you bike won't run.......

I hope you're not saying that even if we paid for the harness in good faith (I did), we won't get the harness unless we spend the additional $ for the module? When I pay for something, I kind of expect to get it ... ACE No not it all, we would hope that you would buy the module otherwise why would you purchase something you can't use without the module? if you wish not to purchase the module please request via e-mail that you would just like to get the wiring mailed out to you and no problem at all , I would put your wiring in the mail today. our e-mail is info@rapidbike.us , please let me know I will be more than happy to mail out your harness by itself . Thank you. and I am sorry if my previous post had caused a misunderstanding.and our phone # 407-277-5557 if you need to call us. Yaman Ah, yes just a misunderstanding then. I do want the cable ahead of time & will email to that effect. My intent is to get the module as well (yes, the cable is not of much use w/o) but this allows me to layout/install the cabling & have it ready for when the budget allows purchase of the module. Thx for clearing this up, I'm a bit slow I guess ... ACE NO PROBLEM. Just let us know when you are ready, we always have plenty of the modules!!! and your price will stay the same since you have already purchased the harness. Y.T.

According to instructions, it looks very easy .

I hope you're not saying that even if we paid for the harness in good faith (I did), we won't get the harness unless we spend the additional $ for the module? When I pay for something, I kind of expect to get it ... ACE No not it all, we would hope that you would buy the module otherwise why would you purchase something you can't use without the module? if you wish not to purchase the module please request via e-mail that you would just like to get the wiring mailed out to you and no problem at all , I would put your wiring in the mail today. our e-mail is info@rapidbike.us , please let me know I will be more than happy to mail out your harness by itself . Thank you. and I am sorry if my previous post had caused a misunderstanding.and our phone # 407-277-5557 if you need to call us. Yaman

I think 20 people bought the harnesses and currently 10 have paid for the Evo or Race module... Thanks kinda sitting on the fence ! Yes it really is but, we can't do anything about it so..... I will be packing all 9 today +1 is Jonathan's we don't ned to ship his.

We received the harnesses today late afternoon, I will be dedicating my all day to program and ship out all 10 systems, Please remember if you have only purchased the harness, nothing will be shipped out without the purchase of the EVO or Racing module ( we still need 10 people to complete the purchase) Thank you. Y.T.

DHL TRACKING # 7373212523

Everything shipped out today (from Italy), just for the heck of it , I will post the DHL tracking number here later on...

UPDATE: We have sold total of 20 harnesses which was the goal for the initial project, I would like to thank everyone of you FOR SUPPORTING THE PROJECT. I have now created a Racing and EVO systems on the www.rapidbike.us so you can purchase the entire system. ALSO FOR THOSE WHO PURCHASED THE WIRING HARNESS BUT HAS NOT YET PURCHASED THE MODULE YET can still purchase the EVO or RACING modules individually. And the initial discount has been discontinued but the shipment for the VFR800 systems are free within the USA and we now have a discount code that we can e-mail you upon request for purchasing the whole system, forum members only . Thank you very much. http://rapidbike.us/products/rb-racing-honda-vfr800-02-09 http://rapidbike.us/products/rb-evo-honda-vfr800-02-09

If you have the software and the usb cable , It should work, We started in RapidBike Distributorship here in the states at the end of May ,2014 so any prior products like RB 1,2,3 we are not familiar with however if there is a question, we'll do our best to find an answer for you...

Actually , we can go with 50 rpm increment , when activated , we can choose between 50 to 1000 rpm. Please keep it in mind, over revving the engine comes with some risks and we typically don't go over 500 rpms. And we can always turn off this function or decrease it anytime. But it would have to be done by us or a tuner who has the software.

UPDATE: Harnesses will be shipping out on Thursday the 25th. , we should receive them on Tuesday or Wednesday. So far out of 17 , 6 of them will be shipping out immediately since we have only had 6 people actually purchased the modules so far . so instead of ordering 25 harnesses I have only ordered 20 since we could't get all 17 paid at nearly same time ... but we do have enough EVO and Racing modules in stock.

The base mapping is already done and the rest will be continuously tuned by Dynamic adaptivity function . and the purpose of getting on board with VFR forum for me is to help out and answer all questions. Also with the purchase of the system you will be able to download the free software and see and adjust (if needed) some of the functions as well. Thanks Y.T.

Well the good news is the wiring harnesses are ready ! to be shipped on Thursday or friday. But we have only confirmed and paid in full 6 systems. I will not delay those 6 systems that is paid for but If we could get the other 11 ordered it is going to be great. Thank you very much. Y.T.

not very difficult, if anyone needs it now, I can e-mail it to anyone who ordered a system, just request it via e-mail , so you can have the opportunity to review it. I have also posted some info on Panigale forum as well here is the link. http://ducati1199.com/mechanical-technical/19142-rapidbike-master-pro-software-info.html EDIT: I meant to e-mail you guys the instructions for the software NOT the software itself which you need the serail numbers to be able to download it. Sorry!

Of course the software is free to download. Each RB EVO or Racing module has a serial number on the back of the module and you will need that number to register and download the software... instructions will be included in the box. PLEASE NOTE: The software only supports Windows operating system.

Link for wiring http://rapidbike.us/products/2002-2009-vfr800-special-project Links for Evo or Racing modules http://rapidbike.us/products/copy-of-2002-2009-vfr800-special-project http://rapidbike.us/products/copy-of-2002-2009-vfr800-special-project-racing-module

Your welcome, and I will try to get back here as often as I can while at work fixing other bikes :)

Hi Guys, I have just joined the forum , we are Cycle Pro - RapidBike USA distributor (One and only ) our web site is www.rapidbike.us and my goal here is not to promote a product but rather answer questions that are related to RapidBike Racing and Evo modules along with accesories and RapidBike Master software, since 17 of you had purchased the wiring harnesses that should be shipping from Italy on or before Sept. 26th. And I am sure that a lot of you will have some questions and this is the place to spread the information and such... Thank you. Y.T.