VolatileVFR
-
Posts
206 -
Joined
-
Last visited
Content Type
Forums
Profiles
Gallery
Blogs
Downloads
Events
Everything posted by VolatileVFR
-
From the album: BAS sensor problem
Very specific on rotor taping and masking... wiped down with wax and grease remover before first primer coat© ©vfdiscussion.com
-
From the album: BAS sensor problem
shot of both rotors after good sanding/etching and anodization removal.© ©vfdiscussion.com
-
From the album: BAS sensor problem
For some reason, I decided to go ahead and remove most of the accessible gold anodization with a rotary pneumatic 90 degree air tool© ©vfdiscussion.com
-
From the album: BAS sensor problem
second shot.. you can see that I was not 100% on gold removal... no biggy© ©vfdiscussion.com
-
From the album: BAS sensor problem
I made sure to cover all thread holes, and in this case, my axle hole... covered small bearings on the driver side left fork that the linked brake caliper pivots on...© ©vfdiscussion.com
-
From the album: BAS sensor problem
After last clear coat has been applied... no wet sanding will occur... they are ONLY forks :unsure:© ©vfdiscussion.com
-
From the album: BAS sensor problem
larger shot of last clear coat.. can sort of see taped off uppers sitting inside my stand..© ©vfdiscussion.com
-
From the album: BAS sensor problem
The newly etched and de-casted forks.... woohoo.... is very smooth to the touch... no casting..© ©vfdiscussion.com
-
From the album: BAS sensor problem
This is the direct comparison to the next pic... although this fork IS still etched for painting, it has been almost 100% smoothed down© ©vfdiscussion.com
-
From the album: BAS sensor problem
Notice the casting... very rough to the touch© ©vfdiscussion.com
-
From the album: BAS sensor problem
thanks to the brilliant talks of Dan (bejbis), the fork stand was made and provided for a GREAT base to paint off of...© ©vfdiscussion.com
-
From the album: BAS sensor problem
Great way to suspend forks during painting and drying...© ©vfdiscussion.com
-
Hey travis.. this is a very nice look... Mine was glued in, and I used the cap of some aerosol can a long time ago... but this material looks great and stock on the overflow tank.. what kind of tube is that you have to 'stretch' into place? very nice.. I have limited experience on epoxy, and I like the thin nice clean layer you have done this with... Tell me tell me.... Thanks man.. PS... 5th gen... got on to see pics of your excess $2400 worth of huggers to see if I liked them... just dont need one now... :) -
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
From the album: 8-spoker
-
-
-
