Jackireland Posted June 30, 2017 Share Posted June 30, 2017 Hi all..... I know we had a thread on how the heat shield on the inside of the right foot peg seems to get rusty, but do we have a video ? or youtube clip ? I can't find anything to help...... I was going to re spray mine but just can't see how to get it off..... Any help/ pictures/ links, would be great.... Thanks ;-) Link to comment Share on other sites More sharing options...
Member Contributer alwaysaware Posted June 30, 2017 Member Contributer Share Posted June 30, 2017 Rust? Whats that? Just kidding. We don't get much rain here in Cali so we don't get much rust either. Link to comment Share on other sites More sharing options...
Member Contributer Thumbs Posted June 30, 2017 Member Contributer Share Posted June 30, 2017 The parts diagram at Lingshondaparts.com for the step shows the fixings, it looks like you have to take the wheel out to access the nuts on the back ....if you have access to a welder it'd be worth tacking them http://www.lingshondaparts.com/honda_motorcycle_parts_selection_pfk?block_01=73314&block_02=block_73314.png&block_03=981&block_04=lp&block_05=hmc Just cleaned my bike, you're going to need the rear wheel out at least, I'd take the end can off ... the nuts are inside the curve of the rt rear exhaust header Link to comment Share on other sites More sharing options...
Member Contributer fink Posted June 30, 2017 Member Contributer Share Posted June 30, 2017 Or just take the footrest off. Mines still fine after 3 Scottish winters. jackireland where about in the isle are you? A few of us are over the west coast next week Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.