Lionparts Pelectrosports Stator

[TwsitedSkull]

Hi Guys.

 

I would like to find out if anyone has any experience o with the Procom stator supplied by Lionparts.

 

I have a 6th gen VFR800 Vtec (Non ABS) and need to replace the stator from where would you guys recommend i get one.

 

I am in South Africa and the dealer wants ZAR 8556.97 (about USD 629.96). Really i could put down a deposit on a new bike.

 

If i need to import so be it. I found the Procom Stator on Ebay supplied by Lionparts.

 

Any and all suggestions are greatly appreciated. I will be getting the 2014 R1 Regulator to fit at the same time. I have already done the wiring upgrade. Will work out my wiring Diagram and post it soon.

 

Just checked again and it is an electrosports stator. Are these any good?

 

[mello dude]

3 hours ago, TwsitedSkull said:

Hi Guys.

 

I would like to find out if anyone has any experience o with the Procom stator supplied by Lionparts.

 

I have a 6th gen VFR800 Vtec (Non ABS) and need to replace the stator from where would you guys recommend i get one.

 

I am in South Africa and the dealer wants ZAR 8556.97 (about USD 629.96). Really i could put down a deposit on a new bike.

 

If i need to import so be it. I found the Procom Stator on Ebay supplied by Lionparts.

 

Any and all suggestions are greatly appreciated. I will be getting the 2014 R1 Regulator to fit at the same time. I have already done the wiring upgrade. Will work out my wiring Diagram and post it soon.

http://www.procaliber.com/oemparts/c/honda_motorcycle/parts

http://www.partzilla.com/parts/search/Honda/parts.html?gclid=CPSXrbHAiNMCFZOKswodBssLaA