MadScientist

Shit I totally screwed up the 1.51 update changelog and filenames, lemme see what I can do to make this understandable again.

IMPORTANT NOTE - There are 3 errors on the wire colors in the original factory diagram. The colors are correct on the colorized layer and verified by actual inspection of the wires:

1) Where the main power wires enter the fuse box - The 12v input to fuse A is listed as R/W at the fuse box end of the wire run and R closer to battery/starter. The wire is actually solid red the entire length.

2) Same location as 1) - The 12v input to fuses B and F is listed as R at the fuse box and R/W where it leaves the reg/rec and battery. The wire is actually red with a white stripe the entire length.

3) The wire that enters fuel injector 2 - listed as R/Y at the fuel injector but P/Y the everywhere else. The wire is actually R/Y to the injector.

Lastly, a warning: Improper or inept electrical maintenance may cause physical harm by electrical shock, damage to vehicle components, and/or vehicle failure while operating. By using this document to perform maintenance or diagnose vehicle problems, the user releases the author from any liability for civil or criminal damages.