Member Contributer ShipFixer Posted October 2, 2021 Member Contributer Share Posted October 2, 2021 ...is on its way to me from EPM Performance 😁 My WP three way is due for service and "could be" done, but is long out of production. Plus I've missed having a progressive spring on the rear shock to match my fork. I had a 5th gen Hyperpro spring on my OEM shock for years (about a quarter inch too long but worked out for my rider weight), and I've always wanted that spring plus a really good shock. So next week its gonna happen! Link to comment Share on other sites More sharing options...
Member Contributer ShipFixer Posted October 7, 2021 Author Member Contributer Share Posted October 7, 2021 😁 Link to comment Share on other sites More sharing options...
Member Contributer ShipFixer Posted October 10, 2021 Author Member Contributer Share Posted October 10, 2021 Installed the shock and set sag tonight, will start test riding and dialing in damping tomorrow! I was a little concerned when I saw the Hyperpro has a shorter reservoir hose than my WP shock, but it turns out it also comes with a nifty custom made bracket to tuck it in just behind the left passenger foot peg bracket. Frees up under saddle space I was using for the old reservoir among other things. Really happy with how it looks, can't wait to try it out! Link to comment Share on other sites More sharing options...
Member Contributer ShipFixer Posted October 11, 2021 Author Member Contributer Share Posted October 11, 2021 Almost learned a hard lesson...reservoir and banjo bolt need to be rotated out of the way of the rear wheel's travel. But I sure do like the feel of this shock. Damping has tons of effective adjustment and it's great to have progressive springs at both ends again. Only took three or four runs to get it 90% dialed in 😁 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.