Guest wagigkpn Posted April 26, 2012 Share Posted April 26, 2012 Starting this thread about my path to making a rear rack to mount my JCWhitney trunk case to. So far i have some Scd40 pipe and some 1/4 inch flat iron=10 bucks I plan on mounting to the rear handles. then running the pipe back with a slight bend so that they are level off the back of the bike. Then weld pipes between the two sides to make it sturdy. Doing a search i found a forum of someone doing the same thing but i cant find it anymore. haha. oh well...if anyone has any tips...by all means post a reply! I am finishing a kitchen remodel this weekend and hope to start maybe next week or two. Link to comment Share on other sites More sharing options...
KanadianKen Posted April 26, 2012 Share Posted April 26, 2012 WIll this work? http://www.vfrdiscussion.com/forum/index.php/topic/67008-6th-gen-solo-racks-for-sale/#entry784489 Link to comment Share on other sites More sharing options...
Guest Posted April 26, 2012 Share Posted April 26, 2012 unfortunately no, i ride two up with my Wife so need to have the passenger seat available. Link to comment Share on other sites More sharing options...
Guest Posted May 15, 2012 Share Posted May 15, 2012 I built it... i admit its a Frankenstein but function>fashion! I was going to take pics but my camera was dead. I am going to paint it so i will take pics then. I had to buy some longer bolts where the handles attach. also some rubber grommets so i was a total investment of about 16 dollars. (not counting electricity and welding wire). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.